Topic: Damage Report From MCR4

[*FFC*]

You mean Automatic Ball Savers, you bet don't your?

[Dirt Mover]

So far so good on the repairs to my truck. It scarred up the outside of the bell on my birf and the inside of the spindle  running it with no top trunion bearing. John H's welds held up perfectly, even after grinding the welds on the outside I could'nt break it apart in the vise with a 12lb sledge. Looks like mudmaster is gong to hook me up with a knuckle and I'll be going in no time.
Now I can start teaching myself about body repair.

[freds40]

Glad John's welds held so good. I was happy to see the trailers that afternoon     

BTW, thanks for the help thus far, I have an interview with Jose @ noon and Brent after work tomorrow. So far so good. 

[germ]

My only problem was a sticking left rear brake, which got the drum so hot that it started to warp. Prolly should have replaced the drums before the trip, but oh-well. Once it cooled, and the brakes adjusted, it was fine. I was worried I'd burnt up the bearing/seal.

Scraped up the pumpkins a bit, gotta put some diff covers on. Also need to do a U-bolt flip. All minor stuff.

Erik

[crawlerdan]

OK, NOW ILL ADD TO THE LIST OF WHAT I ALREADY MENTIONED, I GOT UNDERNEATH THE TRUCK TODAY AND SAW THAT I HAD BROCKEN THE LAST 4 FEET OF EXHAUST OFF, AFTER THE MUFFLER, IT WAS STILL THERE, JUST NOT CONECTED, AND THE CAT WAS A BIT....SMASHED TO  HELL!!!, AND ALSO, I BROKE THE REAR OUTPUT SHAFT?!?!?!

[Hyena]

Output shaft?  What were you doing?  snapped off?  Still there?  Cracked?  We want to know.

[RHG]

  That takes some work to bust a output shaft dont it? Ouch. Dont sound like a fun fix...time for Marlins Chromoly version

[crawlerdan]

Output shaft?  What were you doing?  snapped off?  Still there?  Cracked?  We want to know.

it twisted and then sheared at a later date, thankfully not on the freeway home or something, im prety sure cadalac hill is responsable for it, seeing as i had to bounce and run at alot of the hill toi get up, but i did it under my own power!! yay for stock rigs!!!
anyway, i already fixed it and am back on the road

[84rocktoy]

Mine was just body damage time to change cabs and build my own version of a trailblazer, I guess this makes it one less genuine TrailBlazer.

[*FFC*]

Uhmmmm Mine is rattling up inside around the tranny/tcase... At idle and goin in first gear.  It sounds like crap