Author Topic: toyota and suzuki crap (Read 6562 times)

toyoder · « **on:** Jun 20, 2004, 11:04:44 PM »

2 410 and a 437 thirds 4cyl $50 each 87 rear end 4cyl all there $150 2 83 rear ends $75 84 4runner top needs side glass $50 87 rear end housing $20 85 auto trans and transfer make offer downey 3 inch lift front springs with 3 inch blocks and u bolts $ 75 2 ifs brake rotors $25 83 toyota pick up cab and doors free 83 pick up rear slider window $20 stock 84 springs free suzuki samurai hard top 2 peice $400 obo lots of 22r parts heads intakes exhast manefolds timming covers carbs cheap 2 cv type front drive lines need u joints $20 each suzuki samurai tub and fenders $50 obo 85 toyota celica 22re engine $400 85 22re intake parts $70 and a set of 4 33inch baja claws with 70% to 80% tread left $375 i think thats all im open to trades but need the $$$$ more

Brian83 · « **Reply #1 on:** Jun 20, 2004, 11:31:57 PM »

how much just for the downey springs? what would shipping to 80521 be?? thanks

toyoder · « **Reply #2 on:** Jun 21, 2004, 08:17:54 AM »

i will check after work

yotaboy79 · « **Reply #3 on:** Jun 21, 2004, 09:02:35 AM »

what condition are the doors in pics?, how much to ship to oregon zip 97115, and if brian doesnt want the springs i think ill take them

motorfreak21 · « **Reply #4 on:** Jun 21, 2004, 12:32:48 PM »

I'll take the doors no matter what condition

motorfreak21 · « **Reply #5 on:** Jun 21, 2004, 01:08:43 PM »

I would also like the 4.37 gears and maybe even the 87 rear end housing. I have some tube bumpers that I would be willing to trade. You can see them I have them posted under tube bumpers.

toyoder · « **Reply #6 on:** Jun 21, 2004, 01:10:48 PM »

dont want to deal with shipping thats why there free pas side door is fine good glass inside panel no dings driver door has no window has small dings and dents if you want them come get them

toyoder · « **Reply #7 on:** Jun 21, 2004, 01:17:03 PM »

the trade on the bumpers do you still have the warn

BigMike · « **Reply #8 on:** Jun 21, 2004, 01:24:56 PM »

Do you still have the 87 rear end housing for $20 and the 84 springs for free?

Where are you at? Im in central Cali. I'll drive within a 250 mile radius if your near by-

Or if you can ship them to 93703

Let me know
BigMike

yotaboy79 · « **Reply #9 on:** Jun 21, 2004, 02:06:13 PM »

check shipping on doors ill take them my zip is 97115, i need the doors

toyoder · « **Reply #10 on:** Jun 21, 2004, 02:33:12 PM »

im located about 2 1/2 to 3 houres north of sacramento IN REDDING CA IM NOT SHIPPING FREE STUFF

motorfreak21 · « **Reply #11 on:** Jun 21, 2004, 04:55:18 PM »

Yes I still have the warn

toyoder · « **Reply #12 on:** Jun 21, 2004, 05:17:01 PM »

i wont be going down that way till the middle of july but i will trade you the 4.37 third and that rear end housing for that warn bumper if you feel like waiting or do you ever come up towards redding i could probley meet you half way

motorfreak21 · « **Reply #13 on:** Jun 22, 2004, 09:39:02 AM »

I'll come up to you. Give me a call on my cell 510-378-9198 so we can hammer out the details.

toyoder · « **Reply #14 on:** Jun 22, 2004, 07:30:34 PM »

doors 437 third and maybe rear end housing are pending

motorfreak21 · « **Reply #15 on:** Jun 29, 2004, 12:14:53 PM »

When can you make it down hear? My truck just took a

. You may make it down here before I could make it up your way.

toyoder · « **Reply #16 on:** Jun 29, 2004, 10:38:31 PM »

WELL I WONT BE DOWN THAT WAY TILL AUGUST SO LET ME NO WHEN YOU WILL HAVE YOUR TRUCK DONE TO PICK UP PM ME

motorfreak21 · « **Reply #17 on:** Jun 30, 2004, 12:47:50 PM »

I got a call form the tranny shop today it should be done in a day or so. I may be able to make it up there in a week or two. I keep you posted.

Stovtop · « **Reply #18 on:** Jul 02, 2004, 08:07:49 PM »

i ahve a question on your inchwarm 5:1 gears, how do the work on the trail for low rang and are they worth it then going duel case gears instead and how does it triavel on the freeway with other the inchwarm gears

thanks stov

toyoder · « **Reply #19 on:** Jul 06, 2004, 04:11:25 PM »

i like the 5.1 gears with 456 ring and pinions my low crawl ratio is 93 to one low enough for me it just a little higer than duels but you dont have to redo your drive lines or buy another custom cros member or cut in to your flore board and if you ever decide to do all that you still can with 456s and duel cases with one gered at 5.1 its like 220 to one i
think way to low for what i need as far as high range it does not do any thing duel wont etheir cause its straight through
if you do deside to go with 5.1 gears you have to grind a little bit of the case to get the gears to clear inch worm sells advance
adapter gears witch you can get any ratio 4.0 4.7 5.0 through rock buggey suppley for like $380 i think

motorfreak21 · « **Reply #20 on:** Jul 28, 2004, 09:43:00 AM »

Do you still plan on coming down this way?

Buckwheat · « **Reply #21 on:** Jul 28, 2004, 05:43:24 PM »

still got that 87 rear end complete?

toyoder · « **Reply #22 on:** Jul 28, 2004, 11:12:09 PM »

not going down that way anytime already built a front bumper but i stil have every thing for sale no shipping

Stovtop · « **Reply #23 on:** Sep 16, 2004, 03:36:34 PM »

i was wondering if you still had your baja claws and crurious on they did on the trail , and possible shipping cost to 99350

KYOTA · « **Reply #24 on:** Sep 16, 2004, 04:42:54 PM »

Still have the samurai fenders ? if so how much ? thanks Kyle

Red_Runner · « **Reply #25 on:** Sep 16, 2004, 07:28:18 PM »

did you say you had a 87 rear compleat? if so how much?

4DEES · « **Reply #26 on:** Sep 16, 2004, 09:57:08 PM »

do you have a 22r block

?if so how much?thanx

toyoder · « **Reply #27 on:** Sep 17, 2004, 09:12:16 PM »

the samy fenders are gone
still have 2 compleat ifs rear ends 150 each or both for 250
do have 22r lower end it had a bad head so the bottom is probley ok 50 bucks and its yours
have a 22re compleat running 300
will consider trades need locker for a yota 8 inch $Beer Chug\'n$

Fireimp141 · « **Reply #28 on:** Sep 23, 2004, 08:16:18 PM »

Are the headers/exaust stock or aftermarket?

toyoder · « **Reply #29 on:** Sep 24, 2004, 09:49:00 PM »

HEADERS i never had a header for sale

toyoder [OP]

toyoder [OP]

toyoder [OP]

toyoder [OP]

toyoder [OP]

toyoder [OP]

toyoder [OP]

toyoder [OP]

toyoder [OP]

toyoder [OP]

toyoder [OP]

Related Topics