Author Topic: stock motor mounts vs aftermarket mounts (Read 10470 times)

Dr.Maxwe001 · « **on:** Oct 30, 2009, 11:32:34 AM »

I have herd both good and bad about the motor mounts on the toyota's with a dual tranfercase I have herd that the stock mounts will not hold up to the torq that is put out from a dual setup and I have also herd that it will hold up to the amount of stress that is put on it. now I want to know your thoughts about them why the do/don't work

jonathan82toy · « **Reply #1 on:** Oct 30, 2009, 11:48:19 AM »

I run stockers, with a bolt through it

I can adjust how much I want my truck to vibrate

They are cheap and easy

Dr.Maxwe001 · « **Reply #2 on:** Oct 30, 2009, 11:50:32 AM »

get a picture please

crap jon invest in a digital camera and take some picts.

jonathan82toy · « **Reply #3 on:** Oct 30, 2009, 11:51:38 AM »

It looks like a stock mount.....

*** YELLER *** · « **Reply #4 on:** Oct 30, 2009, 02:28:57 PM »

Quote from: jon82toy on Oct 30, 2009, 11:51:38 AM

It looks like a stock mount.....

with a bolt thru it

OOPS · « **Reply #5 on:** Oct 30, 2009, 03:01:17 PM »

I have been running dual cases with stock MM and T-case mounts for 12 years without a problem. I do have the MM's chained but I just did that last year. I run two mounts on he BudBuilt x-member. Do I get it, yep sometimes!!!!!!!

Dr.Maxwe001 · « **Reply #6 on:** Oct 30, 2009, 03:08:13 PM »

Ok but what I think would be good is to see a couple of pix

OOPS · « **Reply #7 on:** Oct 30, 2009, 03:13:31 PM »

Quote from: marlin_look-a-like on Oct 30, 2009, 03:08:13 PM

Ok but what I think would be good is to see a couple of pix

Of what?

Dr.Maxwe001 · « **Reply #8 on:** Oct 30, 2009, 03:19:46 PM »

Pix of stock slightly modded and overkilled mm

TacoRunner · « **Reply #9 on:** Oct 30, 2009, 07:55:32 PM »

Seriously OVERKILL

TacoRunner · « **Reply #10 on:** Oct 30, 2009, 07:59:30 PM »

The other half

46&2 · « **Reply #11 on:** Oct 30, 2009, 07:59:49 PM »

Quote from: jon82toy on Oct 30, 2009, 11:48:19 AM

I run stockers, with a bolt through it I can adjust how much I want my truck to vibrate They are cheap and easy

X2

zembalayan · « **Reply #12 on:** Oct 30, 2009, 08:20:25 PM »

Quote from: OOPS on Oct 30, 2009, 03:01:17 PM

Do I get it, yep sometimes!!!!!!!

Sweet pics!!!

hi on lux · « **Reply #13 on:** Oct 31, 2009, 04:01:47 PM »

@ Tacorunner-- did you use toyota spring bushings for them?

nice weld!

Dr.Maxwe001 · « **Reply #14 on:** Oct 31, 2009, 09:20:37 PM »

very nice why dont you fab some up and sell them i am sure I would have a order going in

BLACKDOG · « **Reply #15 on:** Oct 31, 2009, 10:44:40 PM »

Put a rockstomper mount on the drivers side 3 years ago. There wasn't a significant increase in vibration in my opinion. The truck was my DD at the time, and regularly saw 80 mile round trips for work and school. My pass side mount broke at MCR, and I repaired it with a bolt through the mount. I did take pics of the process, I'll put them up tommorow if I remember. It was a quick easy fix

BLACKDOG · « **Reply #16 on:** Nov 01, 2009, 10:53:21 AM »

Alright, here's the pics. They're not very good, but you get the gist of it. I used a 1/2" grade 8 bolt, believe it was 5" long.

The mount was already torn, so I just cut the threaded stud off, drilled a hole all the way through, and fastened it with the bolt.

So far so good, laid the truck over a few times last weekend with no movement. Didn't really notice any additional vibration, but I've got other problems that would cover that right now.

TacoRunner · « **Reply #17 on:** Nov 02, 2009, 08:38:32 AM »

Quote from: hi on lux on Oct 31, 2009, 04:01:47 PM

@ Tacorunner-- did you use toyota spring bushings for them?

nice weld!

Quote from: maxwe001 on Oct 31, 2009, 09:20:37 PM

very nice why dont you fab some up and sell them i am sure I would have a order going in

I plan to, but Im working on some other bigger fish to fry.

CruelCrawler83 · « **Reply #18 on:** Sep 19, 2011, 11:44:53 AM »

low range sells the bomb proof mounts. work great. vibrates alot more at first but gets better over time. also noticed better throttle response then with the stock mounts.

H8PVMNT · « **Reply #19 on:** Sep 19, 2011, 06:17:02 PM »

I was going to build some for my threeyarzee with some spring eye mounts but use rubber bushings instead of poly to allow a little more give.

Hey threeyarzee... That's a new word.

*** YELLER *** · « **Reply #20 on:** Jul 15, 2012, 09:16:17 PM »

Quote from: jakehobby2 on Jul 15, 2012, 08:47:47 PM

so............it's my idea.ah oyea, rc helicopter is a wonderfull toy. i like it and you?

------------------------------------------------------------------
Rc Hobby|Rc Helicopter|Buy Rc Helicopter Parts

SPAM ALLERT

Dr.Maxwe001 · « **Reply #21 on:** Jul 16, 2012, 06:15:02 AM »

could that be JAKE ? aka ODDMAR with a new sn ?

*** YELLER *** · « **Reply #22 on:** Jul 16, 2012, 06:48:54 AM »

Quote from: Dr.Maxwe001 on Jul 16, 2012, 06:15:02 AM

could that be JAKE ? aka ODDMAR with a new sn ?

really

you think that ODDMAR would leave a post like that

Dr.Maxwe001 · « **Reply #23 on:** Jul 16, 2012, 06:52:29 AM »

well oddmar DOES like RC helicopters and he hasn't been seen or heard online in well over 6 months or so

*** YELLER *** · « **Reply #24 on:** Jul 16, 2012, 10:21:04 AM »

Quote from: Dr.Maxwe001 on Jul 16, 2012, 06:52:29 AM

well oddmar DOES like RC helicopters and he hasn't been seen or heard online in well over 6 months or so

ITS A SPAMMER JEFF

JUST LET IT GO its been taken care of

Smithk2ski · « **Reply #25 on:** Oct 05, 2016, 03:47:10 PM »

stock!

Dr.Maxwe001 [OP]

Dr.Maxwe001 [OP]

Dr.Maxwe001 [OP]

Dr.Maxwe001 [OP]

Dr.Maxwe001 [OP]

Dr.Maxwe001 [OP]

Related Topics