0 Members and 5 Guests are viewing this topic.
does any one know of any good upgrades to do to my 22r motor while i am rebuilding it besides milling the head and getting new pistons
for cheap good power an 85 re head with spherical heads. dome tops with a crawler cam pace setter header 3 angle port and polish there is a lot you can do and keep it reliable.
i think im going to go with a c cam and get a header when i get the money. and thinking of a turbo
having the headers ,free flow exhaust and an intake is good gains, 10% here 8% there really adds up for these little engines add a cam and expect another 5%,I installed LC eng. ceramic coated headers their cat back and cat delete K&N intake and RV cam in my 93' and felt a whole lot more bottom and mid range gains... good bolt on power for a stock engine.
it kills me how so many people will put tons of money into exhaust and air filters and everything and then install a RV cam. no wonder it didnt show more top end and mid range ITS NOT A RV
You can do a relatively simple power build for about $700(rebuild kit and O/S valve head) + block machine work. A buddy went this route a few years ago using Engine Builder parts along with a Webber carb. It was a definitely night and day difference, rather than pulling mountain grades in 3rd(37's & 5.29's), he could pull them in 5th, or 4th when loaded down with camping gear.
Started by booger1 General 4WD Discussion
Started by GoYoTaGo « 1 2 » Engine
Started by ShawnS Engine
Started by 85yotabox Project Research and Build-Ups
Started by Aaronm « 1 2 3 » Engine