Author Topic: weber 34/34 (Read 2175 times)

1983bamayota · « **on:** Nov 29, 2008, 01:55:36 AM »

i have a weber 34/34, and everytime i go to stop it goes dead. i have a fuel regulator, and she runs good even on steep inclines. you go to stop and while your slowing down you can watch the tech just fall. i'm running 3.5 pounds of pressure while on the road, and 2.0 pounds of pressure offroad. anyone have an idea what this could be?

Hilux92 · « **Reply #1 on:** Nov 29, 2008, 10:26:58 PM »

Check if the idling jets are not blocked.

1983bamayota · « **Reply #2 on:** Nov 29, 2008, 11:22:45 PM »

what and where are the idling jets?

1983bamayota · « **Reply #3 on:** Dec 08, 2008, 04:23:55 PM »

does nobody have a 34/34 weber or what ? i still don't know why it's dying when i come to a stop. if anyone knows, any info would be very helpful

79coyotefrg · « **Reply #4 on:** Dec 30, 2008, 08:09:05 PM »

will it not idle at all??

too many Trailgear parts on it

there's a mixture screw on the base of the carb, it needs to be turned out 1 1/2 turns or more if its jetted wrong

btw i have family around Birmingham

Wayne Hale ring a bell??

1983bamayota · « **Reply #5 on:** Jan 01, 2009, 06:44:03 PM »

i guess yall are talking about the air/fuel mix needs to be moved out about 1 1/2 turns i'll try that that's for the help. i'm about two hours away from birmingham that name doesn't ring a bell. it took me alittle while longer to figure out that cheaper is not always better. it doesn' pay in the end i know that know. thanks

79coyotefrg · « **Reply #6 on:** Jan 02, 2009, 10:06:58 AM »

here this might help http://board.marlincrawler.com/index.php?topic=45126.0

1983bamayota · « **Reply #7 on:** Jan 02, 2009, 10:51:02 PM »

i found that yesterday after i posted that. thamks for the info

Author Topic: weber 34/34 (Read 2175 times)

1983bamayota

weber 34/34

Hilux92

Re: weber 34/34

1983bamayota [OP]

Re: weber 34/34

1983bamayota [OP]

Re: weber 34/34

79coyotefrg

Re: weber 34/34

1983bamayota [OP]

Re: weber 34/34

79coyotefrg

Re: weber 34/34

1983bamayota [OP]

Re: weber 34/34

Related Topics


	Author Topic: weber 34/34 (Read 2175 times) 0 Members and 1 Guest are viewing this topic. 1983bamayota Rock Crawl'n Turtle Points: 0 Posts: 55 Member since Nov '08 gettin ready for easter run!!!! weber 34/34 « on: Nov 29, 2008, 01:55:36 AM » i have a weber 34/34, and everytime i go to stop it goes dead. i have a fuel regulator, and she runs good even on steep inclines. you go to stop and while your slowing down you can watch the tech just fall. i'm running 3.5 pounds of pressure while on the road, and 2.0 pounds of pressure offroad. anyone have an idea what this could be? Logged Hilux92 Rock Crawl'n Turtle Points: 0 Posts: 89 Member since Dec '06 Speed Kills...Drive a Hilux and live forever! Re: weber 34/34 « Reply #1 on: Nov 29, 2008, 10:26:58 PM » Check if the idling jets are not blocked. Logged 1983bamayota [OP] Rock Crawl'n Turtle Points: 0 Posts: 55 Member since Nov '08 gettin ready for easter run!!!! Re: weber 34/34 « Reply #2 on: Nov 29, 2008, 11:22:45 PM » what and where are the idling jets? Logged 1983bamayota [OP] Rock Crawl'n Turtle Points: 0 Posts: 55 Member since Nov '08 gettin ready for easter run!!!! Re: weber 34/34 « Reply #3 on: Dec 08, 2008, 04:23:55 PM » does nobody have a 34/34 weber or what ? i still don't know why it's dying when i come to a stop. if anyone knows, any info would be very helpful Logged 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: weber 34/34 « Reply #4 on: Dec 30, 2008, 08:09:05 PM » will it not idle at all?? too many Trailgear parts on it there's a mixture screw on the base of the carb, it needs to be turned out 1 1/2 turns or more if its jetted wrong btw i have family around Birmingham Wayne Hale ring a bell?? Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way 1983bamayota [OP] Rock Crawl'n Turtle Points: 0 Posts: 55 Member since Nov '08 gettin ready for easter run!!!! Re: weber 34/34 « Reply #5 on: Jan 01, 2009, 06:44:03 PM » i guess yall are talking about the air/fuel mix needs to be moved out about 1 1/2 turns i'll try that that's for the help. i'm about two hours away from birmingham that name doesn't ring a bell. it took me alittle while longer to figure out that cheaper is not always better. it doesn' pay in the end i know that know. thanks Logged 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: weber 34/34 « Reply #6 on: Jan 02, 2009, 10:06:58 AM » here this might help http://board.marlincrawler.com/index.php?topic=45126.0 Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way 1983bamayota [OP] Rock Crawl'n Turtle Points: 0 Posts: 55 Member since Nov '08 gettin ready for easter run!!!! Re: weber 34/34 « Reply #7 on: Jan 02, 2009, 10:51:02 PM » i found that yesterday after i posted that. thamks for the info Logged