0 Members and 1 Guest are viewing this topic.
Have you checked it to see? I would say you do need it
its all pulled apart wat is it i shouldcheck?
check to see that the head surface is clean ,has no scratches or pits,but to be honest if you didnt know why did you take it apartDONT REMOVE THE PISTONS you need a ring compressor to get them back in
I would resurface it just to be safe, then might as well replace the timing chain with steel guides
I feel it is safer to do a little extra work now when you have the motor apart No reason to put this motor together and have the HG blow in 5ooo miles because you did not spend $50 on resurfacing.
Resurface it always resurface it, that is the law. Might as well rebuild it while you have it off.
like i said b4 want to but im in college unemployed and nee to finsh it its my dd
I don't think you understand. If you don't resurface the head (IE do it right) There is a high likelihood that you will be doign it again very soon. (ask me how I know )Do it right, do it once!
Started by DiSperlonga Engine
Started by Rebeltilldeath3 Engine
Started by 4runnerfromhell Toyota Pickup/4Runner Tech 1979-95
Started by Huhwhye Engine