Author Topic: tranny question???? (Read 1543 times)

kauaikid · « **on:** Sep 11, 2008, 11:44:28 PM »

will a r151 turbo trans out of an 86 pickup bolt right into my 84 pickup with a G52 trans and a 22r? Are the bellhousing bolt patterns and tcase crossmember mounts in the same place?

4runner · « **Reply #1 on:** Sep 12, 2008, 01:07:42 PM »

Yes, you gotta use the r151 bell housing. You will need 23 spline input in your tranfer case. Or get the turbo T-case with the tranny. If your gonna use a turbo clutch then you need the turbo flywheel also. But you can use your regular clutch with your stock flywheel for either tranny. and i believe those trannys would use the same crossmember and are both forward shift.

kauaikid · « **Reply #2 on:** Sep 12, 2008, 06:37:10 PM »

thank you

Cheesemaker · « **Reply #3 on:** Sep 12, 2008, 08:19:41 PM »

Get the turbo flywheel and tranny. It's 9/16" larger for more clamping force! Also the flywheel is heavier to help keep from stalling out at lower rpm's.

kauaikid · « **Reply #4 on:** Sep 12, 2008, 10:55:10 PM »

I knew I could count on you guys for all the info I need

Thanks again!

4runner · « **Reply #5 on:** Sep 13, 2008, 05:57:47 AM »

yes the turbo flywheel is a lil bigger so I put it with turbo clutch in my 83. It has a L-52 for now.

Author Topic: tranny question???? (Read 1543 times)

kauaikid

tranny question????

4runner

Re: tranny question????

kauaikid [OP]

Re: tranny question????

Cheesemaker

Re: tranny question????

kauaikid [OP]

Re: tranny question????

4runner

Re: tranny question????

Related Topics


	Author Topic: tranny question???? (Read 1543 times) 0 Members and 1 Guest are viewing this topic. kauaikid Rock Master Turtle Points: 0 Posts: 267 Member since Dec '04 Crawling with Marlin tranny question???? « on: Sep 11, 2008, 11:44:28 PM » will a r151 turbo trans out of an 86 pickup bolt right into my 84 pickup with a G52 trans and a 22r? Are the bellhousing bolt patterns and tcase crossmember mounts in the same place? Logged 84 longbed, lc eng. top end kit, dual cases w/ 4.7 in rear, arb's front w/high pinion and rear with v6 diff., 5.29's w/ 35s, all-pro long travel 4" and much more 4runner Rock Master Turtle Points: 103 Posts: 300 Member since Sep '03 I Love My Marlin Crawler! Re: tranny question???? « Reply #1 on: Sep 12, 2008, 01:07:42 PM » Yes, you gotta use the r151 bell housing. You will need 23 spline input in your tranfer case. Or get the turbo T-case with the tranny. If your gonna use a turbo clutch then you need the turbo flywheel also. But you can use your regular clutch with your stock flywheel for either tranny. and i believe those trannys would use the same crossmember and are both forward shift. Logged built not bought 89 4runner vortec v8, r151, dual cases 4link 1/4 elliptical kauaikid [OP] Rock Master Turtle Points: 0 Posts: 267 Member since Dec '04 Crawling with Marlin Re: tranny question???? « Reply #2 on: Sep 12, 2008, 06:37:10 PM » thank you Logged 84 longbed, lc eng. top end kit, dual cases w/ 4.7 in rear, arb's front w/high pinion and rear with v6 diff., 5.29's w/ 35s, all-pro long travel 4" and much more Cheesemaker Rock Ninja Gold Turtle Award Turtle Points: 1346 Posts: 4,525 Member since Sep '04 Dean Tyler, you were an inspiration to all!! Re: tranny question???? « Reply #3 on: Sep 12, 2008, 08:19:41 PM » Get the turbo flywheel and tranny. It's 9/16" larger for more clamping force! Also the flywheel is heavier to help keep from stalling out at lower rpm's. Logged Miss ya Dean (4THEWKN) & Kyle (KYOTA)!! 4THEWKN~9/17/2006 If it wasn't for you, I'd be driving something other than a Toyota! My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0 Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen kauaikid [OP] Rock Master Turtle Points: 0 Posts: 267 Member since Dec '04 Crawling with Marlin Re: tranny question???? « Reply #4 on: Sep 12, 2008, 10:55:10 PM » I knew I could count on you guys for all the info I need Thanks again! Logged 84 longbed, lc eng. top end kit, dual cases w/ 4.7 in rear, arb's front w/high pinion and rear with v6 diff., 5.29's w/ 35s, all-pro long travel 4" and much more 4runner Rock Master Turtle Points: 103 Posts: 300 Member since Sep '03 I Love My Marlin Crawler! Re: tranny question???? « Reply #5 on: Sep 13, 2008, 05:57:47 AM » yes the turbo flywheel is a lil bigger so I put it with turbo clutch in my 83. It has a L-52 for now. Logged built not bought 89 4runner vortec v8, r151, dual cases 4link 1/4 elliptical