Author Topic: L52 Input Shaft into G52 Tranny (Read 1100 times)

Knucklehead · « **on:** Jan 24, 2006, 06:34:01 AM »

I have read that the internals for the L52 are basically the same as the G52 except for the reverse gears. So, by this, can I assume that I can take an input shaft from the L52 and put it into a G52 tranny without issue?

Thanks

79coyotefrg · « **Reply #1 on:** Jan 24, 2006, 03:09:08 PM »

i think you are right, almost sure of it

Author Topic: L52 Input Shaft into G52 Tranny (Read 1100 times)

Knucklehead

L52 Input Shaft into G52 Tranny

79coyotefrg

Re: L52 Input Shaft into G52 Tranny

Related Topics


	Author Topic: L52 Input Shaft into G52 Tranny (Read 1100 times) 0 Members and 1 Guest are viewing this topic. Knucklehead Rock Crawl'n Turtle Points: -23 Posts: 56 Member since Sep '04 Crawling with Marlin L52 Input Shaft into G52 Tranny « on: Jan 24, 2006, 06:34:01 AM » I have read that the internals for the L52 are basically the same as the G52 except for the reverse gears. So, by this, can I assume that I can take an input shaft from the L52 and put it into a G52 tranny without issue? Thanks Logged '85 Toyota P/U 5.29s w/ Rear Spool Dual Cases w/ MC07 4" Marlin Lift 35" BFG MTs 79coyotefrg Rock Ninja Gold Turtle Award Turtle Points: 1452 Posts: 22,633 Member since May '02 Solid axle Toys Rule ! ! ! Re: L52 Input Shaft into G52 Tranny « Reply #1 on: Jan 24, 2006, 03:09:08 PM » i think you are right, almost sure of it Logged AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/ 32/36weber, Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears RIP Nitro 9-29-07 I sure miss him $I\'m Down$ MarlinCrawlerInc IS NOT affiliated with TrailGear in any way