They're only 35x12.5
Tryin to get some 37's
Its all done i just have to get it aligned if anyone knows a good tech arcticle for aligning high steer. I have been looking for one and i cant find any.
What i do is just take a tape measure take the tires off measure from rotor to leaf, Lign the pitman arm straight and steering wheel straight make sure you are where you want everythign when its straight then adjust from there. Doing the Tie Rod you will just measure that both rotors are the same distance in the front on both sides and on the back aswell. I always go about an 1/8 inch closer to the spring in the front then the rear. For the drag link just get everything even then crank one way then the other and measure how far away the front rotor is from the spring on each side repeat and adjust untill they are even both turning left or right.