Author Topic: tons 2rz three link front. Now slamming on its nuts spring under rear!newpics  (Read 213794 times)

0 Members and 1 Guest are viewing this topic.

89sastoyo

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
I just recently got my license suspended so I decided the time I'm not driving my truck ill just build it into a trailer queen  :qtip:. The plans
Flat belly
build the front axle I just bought using the birfield eliminator kit it came with and buying truss and knuckle rebuild kits,also a lockright and 5.29s taking the arps studs from my axle and using my rear third member aswell.
Rear axle is already done with a welded third 5.29s and chromolly shafts.
Also I'm planning on selling or trading my aluminum wheels for some steel ones and buying some weld on beadlocks for it.
maybe buying some 4ds might stay with the 37s though.
I want to play around with my front springs to get some more flex out of them.
Fix the body damage i got from laying it on its side in a ditch, I need to fix the A pillar to get a windshield in it.
Then paint and a cage.

« Last Edit: Nov 13, 2012, 09:57:23 AM by 89sastoyo »
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #1 on: Mar 16, 2009, 12:10:46 AM »
Here are a few pictures of how a bought it broken shaft in the rear had 5.29s bumper and sliders were cut off didnt come with half doors but got an extra set with good glass with it. Also it had the chromo shafts in the back seat and I had an ifs rear housing laying around I was planning on putting in my 2nd gen.



poser shot after I fixed it



Heres a couple of making my sliders and front bumper for it




89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #2 on: Mar 16, 2009, 12:19:32 AM »
duals and all that some of it wheelin then soon after found out that the third member wasnt set up by a profesional which exploded so i no longer had 4wd then just saved some pennies and bought axles from a friend.






The project now I dont have pictures of the cab damage yet but heres the axles a bought and the lovely mess I found inside them




And the good part of the axles   :yesnod:

« Last Edit: Aug 23, 2017, 12:08:30 PM by 89sastoyo »
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

coods

  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Male Posts: 178
  • Member since May '08
    • View Profile
Re: Adams 89 extra cab build
« Reply #3 on: Mar 16, 2009, 08:38:51 AM »
nice hand full of goop.  :biggthumpup:

86bobbedtoy

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 686
  • Male Posts: 3,938
  • Member since Oct '06
    • View Profile
Re: Adams 89 extra cab build
« Reply #4 on: Mar 16, 2009, 08:53:42 AM »
x2 fun fun

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #5 on: Mar 16, 2009, 03:30:03 PM »
yeah if you look at that ring it has about a quarter inch of teeth sheered off of it and they were all in the housing. Luckily the shafts didnt get messed up or anything
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

Joey88RUNR

  • Offline The 1K Club
  • *
  • Turtle Points: -23
  • Male Posts: 1,057
  • Member since Feb '08
    • View Profile
Re: Adams 89 extra cab build
« Reply #6 on: Mar 16, 2009, 06:04:01 PM »
do you still use the toyota knuckles with the eliminator kit?
SaS'd Dual ultimate crawler w/5.29s Aussie front/detriot Rear, 35's Mtr's with kevlar

coods

  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Male Posts: 178
  • Member since May '08
    • View Profile
Re: Adams 89 extra cab build
« Reply #7 on: Mar 16, 2009, 08:46:00 PM »
 :moon:

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #8 on: Mar 16, 2009, 09:46:55 PM »
do you still use the toyota knuckles with the eliminator kit?

Yeah it still has the stock knuckles everything is stock other than the spindle which comes with the kit. I was told you have to clearance some housings for the shafts to fit but it doesnt apear that this housing was grinded out or anything
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #9 on: Mar 16, 2009, 09:49:36 PM »
I got a little bit of work done tonight on the housing just cleaned it up and wire wheeled on it for a little while. My plans are to get it cleaned up and once the armor is on im going to powder coat it.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

GrenadedToy

  • Offline Crawler Guru
  • ****
  • Turtle Points: 49
  • Posts: 582
  • Member since Jun '05
  • Maatt Daeemon
    • View Profile
Re: Adams 89 extra cab build
« Reply #10 on: Mar 17, 2009, 02:57:00 AM »
just spray paint it.

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #11 on: Mar 17, 2009, 10:43:42 AM »
just spray paint it.

but I can powdercoat it for free so I figured I would then it wouldnt chip as easy :D
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

GrenadedToy

  • Offline Crawler Guru
  • ****
  • Turtle Points: 49
  • Posts: 582
  • Member since Jun '05
  • Maatt Daeemon
    • View Profile
Re: Adams 89 extra cab build
« Reply #12 on: Mar 17, 2009, 01:11:30 PM »
i dunno about having where the trunion races go being powdercoated..

i heard metal to metal contact was bad(on skys website for why they dont powdercoat steering arms)..but dont quote me..
maybe see if anyone else has done it??
« Last Edit: Mar 17, 2009, 05:35:22 PM by GrenadedToy »

coods

  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Male Posts: 178
  • Member since May '08
    • View Profile
Re: Adams 89 extra cab build
« Reply #13 on: Mar 17, 2009, 01:55:53 PM »
you can tape off or plug anything you dont want powder coated so just the outer housing gets painted

GrenadedToy

  • Offline Crawler Guru
  • ****
  • Turtle Points: 49
  • Posts: 582
  • Member since Jun '05
  • Maatt Daeemon
    • View Profile
Re: Adams 89 extra cab build
« Reply #14 on: Mar 17, 2009, 05:35:43 PM »
you can tape off or plug anything you dont want powder coated so just the outer housing gets painted

Oh yeah... :hammer:

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #15 on: Mar 17, 2009, 10:08:10 PM »
yeah ill probably just tape the whole ball off on the end of the housing then just leave bolts in the drain and fill plugs just powder coat over then take them out and put new ones in  :shake:
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

coods

  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Male Posts: 178
  • Member since May '08
    • View Profile
Re: Adams 89 extra cab build
« Reply #16 on: Mar 18, 2009, 01:32:38 PM »
you gonna do it yourself?  ganna need a decent sized oven to fit your axle in

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #17 on: Mar 18, 2009, 03:36:36 PM »
yeah i have access to one thats like 4x4x6ft tall and a gun and a bunch of powdercoat.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

coods

  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Male Posts: 178
  • Member since May '08
    • View Profile
Re: Adams 89 extra cab build
« Reply #18 on: Mar 18, 2009, 07:44:05 PM »
nice they got a big enough rack to hang it.  you just have to make sure you get it realy clean. you should prob sand blast it then right before you paint it treat it with a acetone to get any left over grease and oil off

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #19 on: Mar 18, 2009, 08:52:16 PM »
yup got it covered lol it should be pretty sweet and the knuckels to im ordereing a lockright and truss kit next week so i should get them by next friday.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

coods

  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Male Posts: 178
  • Member since May '08
    • View Profile
Re: Adams 89 extra cab build
« Reply #20 on: Mar 18, 2009, 09:07:54 PM »
sweet ass. gonna go wheelin this weekend if you want to come

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #21 on: Mar 18, 2009, 09:19:34 PM »
maybe on saturday if i can ill let you know fridya if i can but if your going up to browns i cant caus ei work sunday
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

coods

  • Offline Rock Master
  • ***
  • Turtle Points: 0
  • Male Posts: 178
  • Member since May '08
    • View Profile
Re: Adams 89 extra cab build
« Reply #22 on: Mar 18, 2009, 09:48:45 PM »
na were just gonna hit goat. im goin to goat tomo to

boggerunner

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 9
  • Male Posts: 3,140
  • Member since May '06
  • Philberbuilt
    • View Profile
Re: Adams 89 extra cab build
« Reply #23 on: Mar 18, 2009, 10:19:12 PM »
how are the birf elims holding up, my buddy put those in his runner on 35's and they popped first trip out and took out the lockout hub too.

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #24 on: Mar 19, 2009, 12:02:17 PM »
I haven't actually used them but my friend who managed to break to stock birfs open in the same spot had them with 38s and they seemed to hold up so we'll see was his front welded or a locker?
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

GrenadedToy

  • Offline Crawler Guru
  • ****
  • Turtle Points: 49
  • Posts: 582
  • Member since Jun '05
  • Maatt Daeemon
    • View Profile
Re: Adams 89 extra cab build
« Reply #25 on: Mar 19, 2009, 01:03:06 PM »
how are the birf elims holding up, my buddy put those in his runner on 35's and they popped first trip out and took out the lockout hub too.
they arent the sky/randys ring and pinion kit that everyone has problems with. they are yukons.

 I definately wouldnt weld your front diff adam.

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #26 on: Mar 19, 2009, 02:01:39 PM »
they arent the sky/randys ring and pinion kit that everyone has problems with. they are yukons.

 I definately wouldnt weld your front diff adam.

I'm not welding it i was just wondering if that had something to do with why they broke on his friends truck im ordering a lockright next week.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

boggerunner

  • Offline Silver Turtle Award
  • *
  • Turtle Points: 9
  • Male Posts: 3,140
  • Member since May '06
  • Philberbuilt
    • View Profile
Re: Adams 89 extra cab build
« Reply #27 on: Mar 19, 2009, 08:15:50 PM »
i rock a welded front diff, but i have 30 spline longs with hub gears

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #28 on: Mar 19, 2009, 09:09:15 PM »
i rock a welded front diff, but i have 30 spline longs with hub gears

Yeah I have a welded diff i the front right now with stock birfs rallied it with 37s didnt break a birf im sure they are about to but never broke  :greengrin:.

The thing is i borrowed a welded diff to throw in, then I found out it wasnt set up right and it ended up blowing up same person set up the one that came from the front axle I just bought. I figured it was a deal though to get a good diff that was mine to begin with welded 5.29s in the rear axle front axle with the yukon eliminator kit with vented rotors and all that cool stuff 5.29s blown but the housing is still legit for 800 bucks. My housing is bent to, its almost imposible to get a birf in and out of it.
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

89sastoyo [OP]

  • Offline The 1K Club
  • *
  • Turtle Points: 148
  • Posts: 1,327
  • Member since Jan '09
    • View Profile
Re: Adams 89 extra cab build
« Reply #29 on: Mar 20, 2009, 05:22:47 PM »
heres a picture of the damage from the ditch before i beat on the fender and put my other door on





And after i straightend the fender and with the new door





This week im gonna run to u pull it and cut an a pillar of another truck and cut mine out so i dont have to worry about trying to get that one straight. I am going to get an extra cab window to so it should be all fixed up by this weekend
89 extra cab stock on 1 tons.
83 rolled with built toy axles
92 2wd DD
first gen cab

Check out the build.

http://board.marlincrawler.com/index.php?topic=56487.0

 
 
 
 
 

Related Topics

19 Replies
8448 Views
Last post Jan 30, 2010, 01:04:08 AM
by Lizard_lips
16 Replies
4283 Views
Last post Jan 28, 2013, 11:05:10 AM
by Sparkplug
3 Replies
1715 Views
Last post Apr 03, 2013, 03:21:18 PM
by johnny916
5 Replies
3049 Views
Last post Aug 27, 2014, 08:46:58 PM
by TacoRunner
8 Replies
7627 Views
Last post Aug 27, 2018, 02:31:08 PM
by Mac33