I added more; Since the bottom of the tailpipe from the muffler back was gone, I went and bought some universal 1.75 inch flexy tail pipe to slide over it. The pipe was also coming out of the back of the muffler, so I bail wired it back to the muffler hanger. You will see. I hope the pics turn out alright; it is nighttime right now.
Total for this whole project: A little less than $15
Most expensive thing: GAS
![Bling! Bling! :bling:](https://board.marlincrawler.com/Smileys/marlin/bling.gif)
Least expensive thing: Bailing wire and can.
overall pic:
![](http://i230.photobucket.com/albums/ee218/KDXSR5/muffler/Mufflerhuh019.jpg)
Pic of previously installed custom hanger:
![](http://i230.photobucket.com/albums/ee218/KDXSR5/muffler/Mufflerhuh020.jpg)
Hanger to muffler:
![](http://i230.photobucket.com/albums/ee218/KDXSR5/muffler/Mufflerhuh021.jpg)
This is where the tailpipe is kind of broken off of the muffler:
![](http://i230.photobucket.com/albums/ee218/KDXSR5/muffler/Mufflerhuh022.jpg)
Pics of holder from pipe to muffler hanger, I made a loop at the top of the "S" went around the hanger, then made another loop down by the muffler. I then spun the two wire parts together.
![](http://i230.photobucket.com/albums/ee218/KDXSR5/muffler/Mufflerhuh024.jpg)
![](http://i230.photobucket.com/albums/ee218/KDXSR5/muffler/Mufflerhuh023.jpg)
![](http://i230.photobucket.com/albums/ee218/KDXSR5/muffler/Mufflerhuh025.jpg)
I guess I will call that a good days work.