2007 Minivan build aka jk unlimited

Started by Rockcrawlintoy, May 01, 2015, 03:34:12 PM

0 Members and 1 Guest are viewing this topic.

Rockcrawlintoy

PSC has come out with a new steering box for the jk that claims no hydro assist is needed with tires up to 37s and is quite a Bit stronger. Gonna look at that so I may not need to do hydro.
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Cheesemaker

Sorry RockcrawlinJK, I have to be honest with you.  I love seeing your posts, cause your avatar is HOT!!!!
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

Rockcrawlintoy

Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

redneckcustoms13

83 long bed 2wd sas, 3rz, w56, duals with 4.7 rear, 4.88 elock front, spartan rear, 39.5 iroks
01 double cab hunting truck
06 tacoma street truck

Rockcrawlintoy

Well sad day. The jeep failed to start today. Had to call my wife and have the Tacoma jump start it. I knew the battery was gettin weak but thought it was better than it was. Went and picked up an orileys super start platinum AGM made by east penn. The jeep starts better than it has ever done. I also ordered my axles  from carbon off road and they will ship out after KOH.
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Rockcrawlintoy

Ordered a 4.88 gearset and bearings to go with it. I also ordered a lube locker gasket for the diff cover. Heard nothing but great things about them. Up next is an ARB
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

:)bestgen4runner

I will message him again tomorrow when I get to work.
I am 1/5th of Perfect Fit
SqWADoosh [04:19 PM]: *sigh* I guess Chris is right and I just need to wait until I'm in a place where I have a tow rig and trailer before I get this caliber of truck
Mudder [08:28 PM]:   not try to be a jerk, but are you serious bestgen?
Prismo [06:11 PM]:   Done, time to relax or as Bestgen says....FREEDOM!
HogCanyonHopper [06:54 PM]:   I like my little rod. it gets the job done
H8PVMNT [03:30 PM]: I can go both ways.

Rockcrawlintoy

Just ordered the from bilstein 5100. I have the rears already, Almost there.
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

blackdiamond

Quote from: RockcrawlinJK on February 06, 2017, 02:50:10 PM
Just ordered the from bilstein 5100. I have the rears already, Almost there.

Should have gotten Ranchos...

I know it's just me all alone on this one.
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

Rockcrawlintoy

Quote from: blackdiamond on February 06, 2017, 04:58:36 PM
Should have gotten Ranchos...

I know it's just me all alone on this one.

Pretty much. I went cheap for now. I want to eventually run a coilover in the front.
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

mudmaster

I just pulled some Rancho 5000s off the Jeep and installed some Fox's. Ride is much improved.
Time to go wheelin!

blackdiamond

Quote from: mudmaster on February 07, 2017, 06:59:46 AM
I just pulled some Rancho 5000s off the Jeep and installed some Fox's. Ride is much improved.

I actually preferred the ride of the Bilstein shocks on my 4Runner on the street, but they didn't control it off road at all or when it was loaded.  The thing drove like a boat loaded up and bottomed out constantly in Moab.  If I was on the street running empty they had a fantastic ride.
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

Rockcrawlintoy

Quote from: blackdiamond on February 07, 2017, 08:58:01 AM
I actually preferred the ride of the Bilstein shocks on my 4Runner on the street, but they didn't control it off road at all or when it was loaded.  The thing drove like a boat loaded up and bottomed out constantly in Moab.  If I was on the street running empty they had a fantastic ride.


I drive on the street more then I wheel it so that is fine. I bilstines on my old truck and liked them.
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

SqWADoosh

Quote from: blackdiamond on February 07, 2017, 08:58:01 AM
I actually preferred the ride of the Bilstein shocks on my 4Runner on the street, but they didn't control it off road at all or when it was loaded.  The thing drove like a boat loaded up and bottomed out constantly in Moab.  If I was on the street running empty they had a fantastic ride.

Sounds to me like you didn't have enough shaft exposed at ride height.

blackdiamond

Quote from: SqWADoosh on February 07, 2017, 09:57:33 AM
Sounds to me like you didn't have enough shaft exposed at ride height.

Maybe, but the Ranchos I am running are almost dimensionally identical and pretty eliminated the issue. The Bilsteins really did a poor job of controlling my suspension at slow speeds. Lots of flopping back and forth along with bottoming out.  I have no doubt that a Bilstein could be calves to work well, but in my experience the 5100s from Marlin were not a good solution.
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

Rockcrawlintoy

Looks like both my gear order and shocks will be here tomorrow which is pretty cool
I am making an appt to do my taxes next week so hopefully I will get back enough to pay for wheels and tires
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

blackdiamond

It'll be cool when I feel like I need to bring the 4Runner when we hang out.  The Civic handled itself well today!

How do you like the Hankook Dynapro ATM tires on the Jeep?  They are pretty affordable and very similar to the Cooper ATP
1989 4Runner: Dual Ultimate (Inchworm front & Marlin 4.70 rear), Marlin Twin Stick, 1200-lb clutch, 4.88 R&P, Aussie Front, Detroit rear, 30-spline Longs, Long hub gears, ARP hub and knuckle studs & 35x12.50 Cooper STT PRO tires.  Marlin rear bumper & sliders.  FROR front bumper.  SAS with Alcan springs & Rancho 9000XL shocks.  Budbuilt Bolt-on traction bar.  Custom Interior Cage by Those Guys Rod and Customs.

Moab Tested & Rubicon Approved

kneedownnate

Quote from: blackdiamond on February 07, 2017, 07:10:47 PM


How do you like the Hankook Dynapro ATM tires on the Jeep?  They are pretty affordable and very similar to the Cooper ATP

Pathfinder AT is basically a cheaper version of the same tire
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

Rockcrawlintoy

Quote from: blackdiamond on February 07, 2017, 07:10:47 PM
It'll be cool when I feel like I need to bring the 4Runner when we hang out.  The Civic handled itself well today!

How do you like the Hankook Dynapro ATM tires on the Jeep?  They are pretty affordable and very similar to the Cooper ATP

I love them I ran them on my Tacoma as well. They seem to wear really well and have great traction in the rain and snow plus they ride very nice. I would not hesitate to run them again
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Rockcrawlintoy

got bored yesterday and started priming my bumper.
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Rockcrawlintoy

Gears, lube locker came last night. I ordered the wrong bearings and will have the right ones on Wednesday. Front shocks should be here tomorrow as well as the A pillar switch panel. I should have the ARB compressor wired this weekend
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Rockcrawlintoy

switch panel came for the A pillar. my arb switches will go here and light bar when i get one :shocking:. I can also do one more small toggle on this for rock lights.
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Rockcrawlintoy

Switch panel is here and got the arb locker and compressor switches in
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Rockcrawlintoy

Well the shocks for the front showed up as well as my amp kit for my subwoofer. Tomorrow I am gonna get the right bearings and then all I need is an arb and rims and tires
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Rockcrawlintoy

Shafts are finally ordered. They are not selling them to the public yet since they need to test all aftermarket housings for length, seal surface and all that. Lucky for me I have been in touch with them for a while about ordering a set and they sold me the first ones available for my pro rock.
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Willard

Quote from: RockcrawlinJK on February 16, 2017, 04:03:38 PM
Shafts are finally ordered. They are not selling them to the public yet since they need to test all aftermarket housings for length, seal surface and all that. Lucky for me I have been in touch with them for a while about ordering a set and they sold me the first ones available for my pro rock.
So your saying you got a good deal for trial? lol


Sent from my iPhone using Tapatalk
90'4runner......lots of goodies.

Rockcrawlintoy

Quote from: Willard on February 16, 2017, 09:54:45 PM
So your saying you got a good deal for trial? lol


Sent from my iPhone using Tapatalk

No they sell axles for regular jk axles. Only difference in mine and the others is length and seal surface
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Rockcrawlintoy

Pretty sure I am gonna give a Yukon zip locker a try. I am gonna order in the next day or two. Hard to beat for the price and warranty
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Rockcrawlintoy

Zip locker ordered. Just waiting on tax return to buy rims and tires.
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11

Rockcrawlintoy

More parts showed up. The switch pod is gettin full :smokin:
Resident Jeep Guy
2007 JKU All Stock
ECV 7-11