Topic: Any one running taco rotors on ifs hubs?

[95toyrunner]

Hey guys, I'm doing this swap and I was wondering how much of the ifs hub I need to turn down on the lathe. Pictures are worth a thousand words so if you could get one that would be awesome! And are there different styles of ifs hubs?

[Peterbuilt84]

Check my build in my sig (pg 7 I think). Can't recall how much I took off of the hubs. I'm guessing you don't have the rotors?

[mudaddict]

i am on my taco i will search my pictures see if i have any of the hubs after i turned them down.

86-95 IFS wheel hubs, and these must have the OD of the wheel mounting flange turned down for the Tacoma rotor to slip over, to about 6.680 diameter.

[mudaddict]

Not different styles if i recall right its all one style/way.

here is a picture of it. You take the nubs down almost off the way.

[95toyrunner [OP]]

I accidentally got 4runner rotors (16" wheel option) and the ID is bigger than the taco rotors, which I now have. It just looks like I've already taken a lot off the hub.

[Peterbuilt84]

Not different styles if i recall right its all one style/way.

Nope. I ended up getting on of each kind. Some have spaces between the lugs and some are solid all the way around.

[95toyrunner [OP]]

Nope. I ended up getting on of each kind. Some have spaces between the lugs and some are solid all the way around.

Dude yes! I knew there were different styles haha I though I was trippin for a sec. I have the solid ones so the FROR pic threw me off a bit. Are the ones in that pic machined to fit the taco rotors? How much meat is left between the top of the lug and the top of the hub?

[Peterbuilt84]

Yes, those ones have been machined. I don't know the measurement off the top of my head, but like was said above after machining the hub should have a diameter of 6.680.

[95toyrunner [OP]]

Thanks a lot guys! I'll measure tomorrow

[mudaddict]

Nope. I ended up getting on of each kind. Some have spaces between the lugs and some are solid all the way around.

I thought there might have been but i have always seen the one on the left never the right.