Glen's truck

Started by 79coyotefrg, February 18, 2005, 06:10:51 PM

0 Members and 1 Guest are viewing this topic.

NorCalToy

Quote from: 79coyotefrg on November 28, 2008, 07:24:29 PM
actually YES,  Rock Fink Ravine, in HotSprings, i went over this boulder on the right rear just as the front left was going up a tree stump i think, anyway it rocked HARD to the right, didnt think anything of it, till i saw the big (huge) dent in the lower rear 1/4, 
its a saw mill chain, think of a HUGE bicycle chain, and its just bolted on with 1/4 inch bolts

i'm gonna put one on the drivers side also
so howd they hold up? you make it sounds kinda bad...so was it lack of bracing on your part? or just weak metal that bent?
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS

79coyotefrg

Quote from: NorCalToy on November 29, 2008, 06:23:40 PM
so howd they hold up? you make it sounds kinda bad...so was it lack of bracing on your part? or just weak metal that bent?
:headscratch:  the bad dent happened before i put them on,  thats why i put them there

they hold up great, actually  i havent braced them yet, but they held up so far just being welded on, i have bracing material made to go on just hasnt been a priority
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

installed my AllPro ebrake this weekend :woohoo:




i highly recommend this ebrake it is AWESOME

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

not only will it HOLD the truck on the hill, it will STOP the truck rolling backwards
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

YotaJosh

Here's some of the version 2.0... in ACTION! Oh yeah!  :king:  :clap:





'79 Short Bed Pickup 4x4
'04 4Runner V8 Sport 4x2

Rocksurfer

Bet he was happy to be gettin' some action.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

79coyotefrg

yes i was :hyper:  i had an AWESOME time

thanks josh
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

ajordan1975

hey Glen..... it was good to finally meet ya.
hope i can make it to H.S. for the take over!
1990 4Runner, SAS, 22re, 5spd, Dual stock cases, Locked f/b, interior cage

THK Matt

Quote from: YotaJosh on January 19, 2009, 07:43:27 PM
Here's some of the version 2.0... in ACTION! Oh yeah!  :king:  :clap:





My new fav pic of your v2.0
2007 GMC Yukon SLT Daily
5.3L V8, 3.5in Lift, 33X10.5R18 Toyo MTs, Vision Rocker 18x9s powdercoated Mountain Blue Transparent over Speedboat Aluminum

2010 Chevy Tahoe LT Wife's Daily
5.3L V8, 6in Lift, 35s, AMP power steps

2016 Ford F250 XLT CCLB Work/Business Truck
6.2L V8

2001 Ford F350 Lariat CCLB Work/Business Truck
7.3L Powerstroke w/ Banks Turbo

Instagram @ taytershubby13

93tonkatoy

v2.0 is definitely better looking! I like the way it has turned out. :clap2:
It ain't worth doin' if you don't have to clean up afterwards!

Build it, break it, fix it, repeat until your wallet is empty.

I shall infuse thy Jeep with the Essence of Toyota...and maybe that one won't pee on itself at the first sight of granite. - Duffil

SAVE TELLICO post 491

79coyotefrg

bumper looks good too :thumbs:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

93tonkatoy

Yes. It looks great. Gittinit did a great job on restyling it. :clap2:
It ain't worth doin' if you don't have to clean up afterwards!

Build it, break it, fix it, repeat until your wallet is empty.

I shall infuse thy Jeep with the Essence of Toyota...and maybe that one won't pee on itself at the first sight of granite. - Duffil

SAVE TELLICO post 491

79coyotefrg

he's gonna add some tube to it first chance i get to go up there
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

LilChief87

trucks looking great glen

79coyotefrg

some good wheeling this weekend but dang i'm sore :thud:

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

coming up a very rutted power wagon point

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Mario

Nice round fender, it looks great and can really get it> 8)
1984 Toyota Pickup, EFI with duel cases, 5.29's in the diffs, 4" Trailer HD leafs in the front, Chevy's with 3" blocks and a track bar/pan hard bar in the rear with full exo cage.

79coyotefrg

thanks, its been thru alot but its in better shape than i am
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

one of my new favorite pictures

Jamboree in Gilmer TX January 2010


AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

those two make me look very short :ack:




I dont recommend trying this at home :down:




AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

no i wasnt all the way up i just wanted to play it safe, and they took forever to take the picture








best co driver in the world

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

toyomr285

Cool rig! Did you upgrade your innershaft or birdfields?  Or is it stock?  If it is stock, have you ever broken a shaft or birdfield?  Because I am planning to put lockers up front & back, gearing, and 33X10.5 muds up front and wondering if throwing longs is over kill.  Any feedback is appreciated. Thanks.

79coyotefrg

i have broken a birfield before but i was running 32's at the time and i was stupid.
I was stuck in a ravine and went to hit the clutch and quickly reverse in an attempt to rock it out but hit the brake pedal by mistake :wall:

i have yet to break a birfield on the trail while wheeling but i do NOT run a front locker.
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

BigMike

Maybe it will self heal?
Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

jimbo74

i like the new front bumper, way cooler than that thing that was on it before :)
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

BigMike

Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

jimbo74

Quote from: BigMike on August 17, 2010, 10:41:40 AM
:bat:


it was... the old front bumper looked like he stole someones gate and mounted to the front of his truck
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

BigMike

You made me think about gates

Check out this sweet gate:



I've thought about installing one of these in our back yard

But you know you just can't skip on the classic picket wooden fence, like this one



What do you think about old looking picket fences? I think they are the coolest

Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

Installer_Joe

Hey BigMike,

Did you know picket fences date all the way back to the early colonial era? :o

Joe
I can install anything, Just ask me. Need advice, I can give any advice on any install job. At my work I am known as Installer Joe or for the lay folk, Joe the installer.