Glen's truck

[YotaJosh]

Your truck is looking  ! 

Where's that fancy winch? The bumper looks nekkid without it.

[79coyotefrg]

still on the bench i need to get that motor cover and the cage thing that holds the brushes

[Rocksurfer]

Best way to put that sticker on is to spray your hood with water, smooth it on then using something with a straight edge squeeze out the water and air.

[V-Man]

Best way to put that sticker on is to spray your hood with water, smooth it on then using something with a straight edge squeeze out the water and air.

  Soap and water are better then stright water.  Dish soap is about the best I've tried. Also try to apply the sticker by slowly rolling it onto the surface..

[THK Matt]

damn that a good tip.



we need a "Simple, But Handy Tips" thread.

[Duffil]

damn that a good tip.



we need a "Simple, But Handy Tips" thread.

it's called yotatech.com

[Rocksurfer]

Didn't know that they had any good or handy tips over there?

[THK Matt]

Didn't know that they had any good or handy tips over there?

[Rocksurfer]

Here's my breakdown of 3 boards on the net.

Pirate 4x4.com:

Good tech, lots of trolls and flaming

Marlincrawler:

Great tech

Yotatech.com

Trolls

[SteveB]

trolls?

[Rocksurfer]

Yeah you know, trolls they hide under a bridge, they invite you to cross the bridge, and then jump up block your way across and make it impossible to do anything.

[SteveB]

So... yotatech has a lot of BS

[Duffil]

Here's my breakdown of 3 boards on the net.

Pirate 4x4.com:

Good tech, lots of trolls and flaming

Marlincrawler:

Great tech

Yotatech.com

Trolls

many moons have passed, my son, since we have had great tech on this board. It's a BS convention.

[79coyotefrg]

um HELLO this thread is about ME and my TRUCK  not TROLLS

[jonathan82toy]

So post some pictures of it!   


P.S..... I do not like trolls either. 

[Duffil]

um HELLO this thread is about ME and my TRUCK  not TROLLS

so delete it all.

[79coyotefrg]

so delete it all.

  it's not that important   i intended to get some pics today but cant remember if i did or not

[Rocksurfer]

Yeah post some pics or we'll bring this house down!!!

[SteveB]

Mischief and mayhem??? Count me in 

[Rocksurfer]

 

[79coyotefrg]

ok heres a few for your enjoyment







frame contact

[LilChief87]

i used  to have that alot till i got spacers for the  end

[Toymin8r]

get an 86 & up rear axle.

[V-Man]

He may have a 86 and up axle in the yard.... ( just not the one out of my runner Glen).

[79coyotefrg]

He may have a 86 and up axle in the yard.... ( just not the one out of my runner Glen).

  um 


no no,  its still there

yea  i got a 86 rear that Gittinit  shaved the drain plug on, i just gotta get some new bearings and seals for it

and make some 5/8 spacers for my ifs hubs,  i aint gonna pay $200 for the sky kit when i can get a machine shop locally to turn the spacers out

[SteveB]

nice truck homie 

[NorCalToy]

so glen...have you ever dragged the rear quarter panels on anything? your angle iron protector deals... and...how is the step attached on your pass side to your slider?

[79coyotefrg]

so glen...have you ever dragged the rear quarter panels on anything? your angle iron protector deals...

actually YES,  Rock Fink Ravine, in HotSprings, i went over this boulder on the right rear just as the front left was going up a tree stump i think, anyway it rocked HARD to the right, didnt think anything of it, till i saw the big (huge) dent in the lower rear 1/4, 

and...how is the step attached on your pass side to your slider?

its a saw mill chain, think of a HUGE bicycle chain, and its just bolted on with 1/4 inch bolts

i'm gonna put one on the drivers side also

[79coyotefrg]

this pic gives me a headache

[LilChief87]

ouch  glad you survived from that