Topic: lcwizard - Axle Tube Extentions. Make your stock axle wider.

[GregBennett]

I got these from lcwizard here on the board to make my 62 axle wider (around 5"). I no longer need them as I've decided to get a custom diamond made.

You remove your balls put these in your housing then put your balls in these.

ASKING: $100 shipped for both. I paid around $120 or so plus shipping.

[lownlinked85]

is there a website one could go to, to check these out in a bit more detail?

[BoG-ToY]

whats kinda too bad is that they are not 3" each...

if you JUST did ONE 3" on the short side, you could run an fj60 short side axle shaft, with new perches

[GregBennett [OP]]

is there a website one could go to, to check these out in a bit more detail?

Sorry a guy on the mud board makes them and sells them.

[GregBennett [OP]]

whats kinda too bad is that they are not 3" each...

if you JUST did ONE 3" on the short side, you could run an fj60 short side axle shaft, with new perches

These are the perfect length for you to run a 60 short side. He originally made them for 40 guys to widen there stuff so they could run a 60 short. The 40 and mini fronts are the same.

[BoG-ToY]

cool cool, I always thought they were three inches longer.

[GregBennett [OP]]

cool cool, I always thought they were three inches longer.

I'll double check but I'm almost sure that was his original plan. The larger leaf springs are a pain on the 40 and 60 stuff. Something about having to notch the housing or outboard the springs or something. I don't remember the details 100%. I just saw it as a chance to get a wide axle housing for a low cost. He was selling custom 30 spline shafts for cheaper than most at the time also.

[lownlinked85]

so to make these work I would have to get longer inner axels correct

[GregBennett [OP]]

so to make these work I would have to get longer inner axels correct

To use both you would. Longfield sells them for around $150.00. Check his site.

Buy my FJ62 housing and get you some inners and you'll have an awesome axle. I also have inners if you want to do a deal. It would have to be fast as I would have to tell Brian at Diamond to make my housing wider.