Rock light install

[Yota4life]

I went to Wally mart and bout 2 sets of 55watt fog lights. They were only 15$ a box. Comes with wiring harness and rocker switch. Great Deal aint it!   Im going to place 2 in the middle of the truck tucked up and 2 in the front wheel wells. Ill take more pictures when i get them installed.

[Yota4life]

more

[lilbuddy]

I put mine (same ones) in between the front bumper and body right in between that little space facing down in front of the front tires and then put the other 2 on the first body mount in the front that is behid the front tires. It lights everything up pretty good. I could take some pics if you want. Only thing that might make a difference is that I have a 3 inch body lift... Oh some advice for you, if you go through water puddles alot then you might want to water proof the lenses because on mine it got water inside of it and then it cracked the glass. Kinda lame...

Chris

[Yota4life]

I was just looking for places to mount them and i was also thinking about the body mount. I also have a 3inch body lift too. i also bought some clear silicone to waterproof them around the lense. Take some pics for me i would really appreciate it.

Also did you use the wires it came with because i want to wire all 4 to one switch and use a relay i bought.

[KYOTA]

When you get them mounted be sure and take some night shots and post up if you would  8)

[lilbuddy]

OK I just took some pics. They are at night but I think they will work. Actually mine are a little bit different. Not completely the same...

I used the wire harness that came with it and I used the 2 switches. Just if I want 1 set On I can do it that way.

Chris

[lilbuddy]

Oops I guess pics help...

OH for everyone this is MY TRUCK, this is not Yota4Life truck... I just got back from the snow thats why the driveway is all wet     

Oh those are my KC's on top with the covers still on, it made the picture clearer...

The first pic is my truck on with the lights on
Second pic is a front picture with the light off of it in the front with the light in between the bumper/frame
Third is of the same front picture with the light on

Chris

[lilbuddy]

MORE pics 

Fourth pic is the same front lights but the camera back a little furter
Fifth picture is the rear light on the body mount closer

Chris

[lilbuddy]

One more...

The sixth picture is the rear light on the body mount a little further back and with it underneath a little more

Chris

[SWAMPER]

I like that I was actually looking at the same lights to use them for the same thing

[Yota4life]

I just took some pictures of the lights on at night. But it got dark so i only mounted the front lights. Tomarrow i will put the rears on. I used a 30amp relay so i can run all 4 lights on one switch. I cant post the pictures yet because my camera battery just died.

I used some Clear RTV silicon for weather proofing to seal the lights from water getting in.
The lights are very bright, im surprised and hey for 15$ and a 3year warrenty it was well worth the money.

[lilbuddy]

Yeah same here. Mine were 20 and as you can see in the pic with the front one off, it is cracked. What im going to try to do is send it in and say that the light broke for no reason at all. I might use some z-poxy glue around it but then I wouldnt be able to get it off so Im not sure. I might just go get some of that RTV Silicon glue like you got.

I figured the same thing, they are a good deal for their money. I figured why put some $100 KC Lights underneath when they have the risk of breaking. They are half the watts but they are really bright. My bro also got some of the "Pro Burner" lights but they are smaller then yours but they are incredable bright.

Chris

[Yota4life]

Take it back to wall mart and see what they say if thats where you got them. By the way i got the silicone at Auto Zone for   3$.

[lilbuddy]

I was going to but they are all muddy and there is water/mud stains in the glass... I could still try but I spliced the wires and stuff...I fully doubt theyd take it back

Chris

[Yota4life]

The camera made it look darker than it really is...

[Yota4life]

Mount

[lilbuddy]

Looks good. Yours look like they are more blue then mine. Well they have a more blue tint to them...

Chris

[Yota4life]

My have blue tinted lenses.
Ill probley end up putting 6 all together under my truck. Gonne be sweet@!

Then some crazy bright lights on my front bumper... Ill be set for nite wheelin at the rubicon!

[Skinny_Pedal]

anyone thought of clear underglow

[WHITE_TRASH]

I just put 4 tractor lights under the 90 a couple nights ago.  I still need to remount one of them beings you can see the lens when its on.  I hate seeing the lights, I just like seeing the ground etc.  I think it pretty tacky when its obvious where they are.  Ill post up pics when I get the rest of them mounted.

[FATB0Y]

My have blue tinted lenses.
Ill probley end up putting 6 all together under my truck. Gonne be sweet@!

Then some crazy bright lights on my front bumper... Ill be set for nite wheelin at the rubicon!

looks good

[raybie]

        electronics with names like that scare me.      at least they are not sparkomatic.

[raybie]

rig looks good though

[Yota4life]

  They put Burners on there so all the ricers buy them   

[raybie]

did they come with a free 18" chome exhuast tip?  

[Yota4life]

Its called a Phat OVAL Can....everyone knows that..  

[raybie]

 

[FATB0Y]

electronics with names like that scare me. at least they are not sparkomatic.

                                                                                                        

[Yota4life]

I took pictures now that i got all 4 wired up.

[Yota4life]

O yeah...Silverstar Headlamps