Sc crawlers build

Started by santa cruz crawler, September 13, 2010, 05:46:12 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 3 4 5 6 7 8
User actions

santa cruz crawler

#60
September 24, 2010, 01:07:29 PM
I got Eco marlin axil seals on the way and a fresh marlin hoodie
I'll be rebuilding the front axil as soon as fed x drops it off
more picks to come   :gap:

santa cruz crawler

#61
September 26, 2010, 07:18:35 AM
Here is the first flex since I lifted it

santa cruz crawler

#62
September 26, 2010, 07:21:09 AM

santa cruz crawler

#63
September 26, 2010, 07:23:07 AM
I'm going to pull a one leaf from the front and the rear, I think I can get way more flex.

noflyzone

#64
September 26, 2010, 08:08:55 AM
You might want to take it a couple good rides first and see if the break in some.

santa cruz crawler

#65
September 27, 2010, 09:42:31 AM
I'm sure I should pull a leaf my pass tire was almost coming of the grown
and my front pass wasn't even tucked yet

pullin leafs boys!

SCyotacrawler420

#66
September 27, 2010, 11:21:10 AM
i never pulled a leaf out of mine while i broke them in, it takes about a good year for them to start feelin nice, cause if you pull a leaf out it will feel nice for a little bit but then they will over arch or start to lose spring weight an snap one. just like scottys did on his 4 runner, look at how nice my all pro springs were, i got almost 40 inches of flex on leafs... leave em in until there broken in. or else your truck will just be a  :smack:

santa cruz crawler

#67
September 27, 2010, 11:29:22 AM
I just want more flex in the front , but I'll take your word on it,
time to make a flex ramp!!

SCyotacrawler420

#68
September 28, 2010, 10:45:46 AM
jump it everyday also, i hit kragon jump everyday day in my truck an that helped alot. mine flexed good an never over arched an i jumped it alot an went wheelin almost everyday too... so get to wheelin

santa cruz crawler

#69
September 29, 2010, 06:59:13 PM
Well said at least my springs don't sag , Ive seen some sad stuff.
So i got my marlin seals ,stickers ,hoddie yesterday .
Quik shipping I might add 2 days  grownd shipping!!

As soon as I can I'll get some gear oil and start the complete tear down
and I'm going to order a diff armor form marlin, I'll hopefully get it just around the time I finish.  No hurry this axil is in need of a bad cleening .

santa cruz crawler

#70
September 29, 2010, 07:03:58 PM


marlin Eco seals

SCyotacrawler420

#71
September 30, 2010, 10:21:08 AM
i member buying seals for toyota axles... those were the good days. but now i have stupid 1 tons. oh ya, im buying a dana 60 for the front cause i can already tell a d44 will blow up the first time i hammer down

santa cruz crawler

#72
October 05, 2010, 08:24:36 AM
yeah ,the dana 60 will be huge!! 

yota4x4sc

#73
October 11, 2010, 09:38:34 PM
ha i already thought about that, that's why i started out wit the d60..shoot some turtle points  :turtle: :turtle: :turtle3: :respect:

PS brandon this is andrew if u couldnt tell!!$
:usa: 92 xcab, full width, 39.5 boggers, beadlocks, 60 f arb 5.86s , 60 r spool , duals, 4.7 rear... 3.sl0, bobed , all pro 6 inch leafs f and r :usa:

yota4x4sc

#74
October 12, 2010, 08:23:28 PM
Quote from: santa cruz crawler on September 27, 2010, 11:29:22 AM
I just want more flex in the front , but I'll take your word on it,
time to make a flex ramp!!
we got a flex ramp at the hatchery u can rally
:usa: 92 xcab, full width, 39.5 boggers, beadlocks, 60 f arb 5.86s , 60 r spool , duals, 4.7 rear... 3.sl0, bobed , all pro 6 inch leafs f and r :usa:

santa cruz crawler

#75
October 16, 2010, 07:36:01 AM


my home made sliders

santa cruz crawler

#76
October 16, 2010, 07:38:43 AM


I rebuilt the front axil, painted cleaned , checked the axil for cracks ect... All is good

santa cruz crawler

#77
October 16, 2010, 07:40:12 AM


marlin seals  cleaing everything

santa cruz crawler

#78
October 16, 2010, 07:41:39 AM


santa cruz crawler

#79
October 16, 2010, 07:47:06 AM
So while I was on the last hub I lifted my thumb nail back on a bearing race,  bleeding every where I went to piss.  Found my self passed out i
on the ground while I was pissing and cracked my head pritty good. Lol
every thing was good , taped the thumb up finished with a good story

yota4x4sc

#80
October 16, 2010, 11:08:15 AM
working on trucks is no joke.. tough in the streets..sounds narley though
:usa: 92 xcab, full width, 39.5 boggers, beadlocks, 60 f arb 5.86s , 60 r spool , duals, 4.7 rear... 3.sl0, bobed , all pro 6 inch leafs f and r :usa:

SloCrawler

#81
October 16, 2010, 02:03:42 PM
Ahh. Careful, my friend once jumped up to go take a leak and same thing, except several stitches from cracking the toilet bowl..

Sparkplug

#82
October 16, 2010, 03:28:33 PM
crazy, same thing happened to me like 3 days ago, was workin under truck, got up to do sumthin, woke up on deck, we call that a freebie here :smoke:
2008 TRD 4x4 Double Cab Tacoma
1994 12 valve 5 speed 4x4 single cab dodge 2500
1986 22re 5speed 3link 4runner (the beater)
1982 3rz swapped pickup (in progress)

santa cruz crawler

#83
October 17, 2010, 07:27:28 PM
 Idk it's all good now , doing the front axil complete from end to end is a lot of work I was waitin for a good bleeder but this one was awsome my head still hurts the truck feels good axcept around 15 20 mph the truck shimmies for a min as I accel it goes away , I'm going to get a differnt steering shock right away

yota4x4sc

#84
October 17, 2010, 07:58:34 PM
u mean axle?
:usa: 92 xcab, full width, 39.5 boggers, beadlocks, 60 f arb 5.86s , 60 r spool , duals, 4.7 rear... 3.sl0, bobed , all pro 6 inch leafs f and r :usa:

-Jake-

#85
October 17, 2010, 08:10:15 PM
Quote from: yota4x4sc on October 17, 2010, 07:58:34 PM
u mean axle?

Quote from: yota4x4sc on October 16, 2010, 11:08:15 AM
working on trucks is no joke.. tough in the streets..sounds narley though


you mean gnarly?   :_oops:

















:beerchug:
81 Hilux, E-Lockers, 5.29s, Duals, 30 spline Longfields, 8274 Warn, 40" Iroks, F150s and RUF

yota4x4sc

#86
October 19, 2010, 11:45:58 AM
Quote from: -Jake- on October 17, 2010, 08:10:15 PM
you mean gnarly?   :_oops:
haha ya dude  :biggthumpup:
















:beerchug:

:usa: 92 xcab, full width, 39.5 boggers, beadlocks, 60 f arb 5.86s , 60 r spool , duals, 4.7 rear... 3.sl0, bobed , all pro 6 inch leafs f and r :usa:

YotasForLife

#87
October 19, 2010, 04:49:09 PM
what axles are on that Zuke?
87 Runner Geared and Locked...

yota4x4sc

#88
October 19, 2010, 08:45:48 PM Last Edit: October 24, 2010, 07:51:27 PM by yota4x4sc
Quote from: YotasForLife on October 19, 2010, 04:49:09 PM
what axles are on that Zuke?
the axles are super super old jeep glaidator axles... like drum closed nuckle d 44 front and duelly 60 ish 44..both fron the super old jeep..quarter elpitcial suspension, pretty custom ride, split rims too..got the extra tires to make it duelly lol hahaha
:usa: 92 xcab, full width, 39.5 boggers, beadlocks, 60 f arb 5.86s , 60 r spool , duals, 4.7 rear... 3.sl0, bobed , all pro 6 inch leafs f and r :usa:

santa cruz crawler

#89
October 26, 2010, 07:51:25 AM
yeah
Print
Go Up Pages 1 2 3 4 5 6 7 8
User actions