Superwinch hubs

Started by desrodunes1, August 29, 2010, 07:48:26 PM

0 Members and 1 Guest are viewing this topic.

desrodunes1

I was wondering why my driver side hub ends up in the 4x4 position when ever I drive somewhere? sometimes I can here a strange noise front the front end and when i pull over to check it out i find the hub is in 4x4 position, I turn it back to 4x2 and when I get home again its back to 4x4. I'm thinking rebuild or maybe the the small ball or BB is worn ? just trying to figure it out before I tear it apart

KDXSR5

Quote from: desrodunes1 on August 29, 2010, 07:48:26 PM
I was wondering why my driver side hub ends up in the 4x4 position when ever I drive somewhere? sometimes I can here a strange noise front the front end and when i pull over to check it out i find the hub is in 4x4 position, I turn it back to 4x2 and when I get home again its back to 4x4. I'm thinking rebuild or maybe the the small ball or BB is worn ? just trying to figure it out before I tear it apart

If they are Superwinch hubs, that may be the problem. I have never used them, but from what I have been told, the stock Toyota Aisin hubs are much better. Have you tried swapping a stock hub on to see if it does it with a stock hub?

desrodunes1

no I haven't but will do when I can get some thx

Rocksurfer

Find stock hubs I've never had any trouble with them other than the normal wear & tear and never has one just locked in on me. They may be a little harder to remove but are worth it.
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

germ

Although I have no personal experience to back this, I have never heard a good thing about the superwinch hubs. For toyota's, Aisin is the only way to go. For others I've had good experience with Warn hubs.

Sounds like a retaining bearing or something has worn out (the little spring loaded doodad) that keeps it locked in position. Prolly needs a rebuild or replacement.

Erik
* Regardless of what happens, someone will find a way to take it too seriously.
* 2% rule: Must be 2% smarter than what your working on.
* If you make something even a fool can use, only a fool will use it.
* I've been crapping in the woods longer than lil'buddy has been alive!

sctoyota

I had to get rid of my Aisin hubs when the IFS went. I have Superwinch ones now. No problems yet. It sounds like I will, though.
Fat chicks and mopeds are a good ride until someone sees you.

yoshaleng

SCTOYOTA...you should of kept your ifs hub and got longfield gears for the hubs so you can use them and that would made them stronger than stock....back to topic, a guy bought a pair of superwinch from where I work at and came back to return them after a month. He said they were giving him alot of problems with it staying locked.

sctoyota

YosHaleng,

Thanks for the advice. I will do that if I have any issues. I have always heard that the Aisin's are unbeatable.
Fat chicks and mopeds are a good ride until someone sees you.

yoshaleng

Yes...stocks are great but it's too scarce to find a spare...Bobby's gears won't break.