Author Topic: project blood,sweat, and beers (Read 26779 times)

Dingman. · « **Reply #90 on:** Nov 16, 2011, 05:56:53 PM »

Well when u do hit me up.

OldGold3VZE · « **Reply #91 on:** Nov 16, 2011, 08:30:51 PM »

How did the u-bolts with the D-ring style swing mount hold up on the old toy axles? I've never seen that done before.

P-DiseToy24 · « **Reply #92 on:** Nov 16, 2011, 11:02:59 PM »

they worked reallly good untill you roll doin 30.. haha they tend to break/bend when that happens. other than that they worked tits

P-DiseToy24 · « **Reply #93 on:** Nov 17, 2011, 08:12:45 AM »

Thomas P · « **Reply #94 on:** Nov 17, 2011, 08:41:37 PM »

Boss!!

P-DiseToy24 · « **Reply #95 on:** Nov 18, 2011, 08:38:10 PM »

Guess I should throw up some some specs..
60/70 welded f/r For now 6.17s
New 4.7 23 spline dual from tg yes its tg i got a screamin deal from jay at yota masters on a new case set up and steering. If your in so cal anywhere close to corona ca hit them up great guys who know there Toyota stuff.
Custom built Deavers 2.5 piggy back kings rear
home brewed but dialed pack in front with 2.5 king rs. front
24 to the frame
9.5xp hydro assist
fiber f/r
exo/inner cage asap

P-DiseToy24 · « **Reply #96 on:** Nov 20, 2011, 10:47:01 AM »

Tore out the old toy crossmemeber

P-DiseToy24 · « **Reply #97 on:** Nov 20, 2011, 10:48:02 AM »

cut the stock frame back to the motor mounts,

P-DiseToy24 · « **Reply #98 on:** Nov 20, 2011, 10:49:31 AM »

I had some scrap metal laying around so i end up using as much as possible to save me some coin.

P-DiseToy24 · « **Reply #99 on:** Nov 20, 2011, 10:54:25 AM »

Burned it all in and threw some plate at it... the inside is also plated to the inner frame rail as well

P-DiseToy24 · « **Reply #100 on:** Nov 20, 2011, 11:00:42 AM »

Rear end I used a couple of 1 5/8 130 wall tube for the back of the frame. I still need to gussest and plate the outside of the frame about 6 inches past the cut line

P-DiseToy24 · « **Reply #101 on:** Nov 20, 2011, 11:02:49 AM »

Built some shakles to for the rear the other day too.. im planning on using ballistics 2.63 bushing ends for where the shackle will be bolting to so I can adjust ride height and dial in the rear as best as possible

P-DiseToy24 · « **Reply #102 on:** Nov 21, 2011, 11:02:31 AM »

the front end is getting there got pretty much all of the main parts finished and burned in

P-DiseToy24 · « **Reply #103 on:** Nov 21, 2011, 11:03:18 AM »

P-DiseToy24 · « **Reply #104 on:** Nov 21, 2011, 11:08:52 AM »

I finally figured out what im going to do with the flange on the 70 and threw a triple drilled on the lathe last week to mill it down..
plan is to mill down the stock flange as flat as possible and tig on the moded triple drilled.. lol a little ghetto but it sounds good in my head haha

superyota · « **Reply #105 on:** Nov 21, 2011, 11:09:52 AM »

nice progress! welds look great.

P-DiseToy24 · « **Reply #106 on:** Nov 21, 2011, 11:12:26 AM »

thanks alot man I appriciate that. Its taken alot of trashy welds to get where im at now and im still LOW on the welding totum poll...

P-DiseToy24 · « **Reply #107 on:** Nov 21, 2011, 02:39:09 PM »

Pulled apart the front end a few nights ago...
pretty stoked to start puttin parts on this thing.
6.17s
ballistic HS.
throw some more weld at the slight shave it has
toy flange
welded till i can afford an arb
cut off the dually flange
build diff cover
mount hydo ram
new u joint
new calps pads yadda yadda

P-DiseToy24 · « **Reply #108 on:** Nov 21, 2011, 04:25:34 PM »

Got a plate made for the rear... Im thinkin of putting a couple holes with a whole saw to weld in

P-DiseToy24 · « **Reply #109 on:** Nov 21, 2011, 04:29:55 PM »

oh yeah and I finally made a decision and built a pick.
welded on some W plates on the front
Winch and my lucky fairlead are in too

*** YELLER *** · « **Reply #110 on:** Nov 21, 2011, 04:48:35 PM »

could you post random pictures of yer welds so I can stare at them there so clean, nice werk

P-DiseToy24 · « **Reply #111 on:** Nov 21, 2011, 05:04:40 PM »

Wow!!! that makes me feel pretty good man that really means alot. You have no idea how many hours its been behind the mask and to here that makes it all worth it.
Ill get some up soon!

P-DiseToy24 · « **Reply #112 on:** Nov 21, 2011, 05:12:35 PM »

I still have a long long way to go but heres one my buddy took of some rear lowers for a watts link on a rat rod im tryin to build him on the side. I ended up only welding the sides so he can at least use it for mock up.

*** YELLER *** · « **Reply #113 on:** Nov 21, 2011, 05:40:27 PM »

TRUCK PORN

lets see a build thread on that rat rod

P-DiseToy24 · « **Reply #114 on:** Nov 21, 2011, 05:43:43 PM »

lmao
ill see if I cant get a few pictures next time im out there workin on it.

*** YELLER *** · « **Reply #115 on:** Nov 21, 2011, 05:48:42 PM »

sweet

Zs Confederate Toy · « **Reply #116 on:** Nov 21, 2011, 08:42:02 PM »

Quote from: ** YELLER ** on Nov 21, 2011, 05:40:27 PM

TRUCK PORN

lets see a build thread on that rat rod

X2

83 Crawler · « **Reply #117 on:** Mar 14, 2012, 11:59:00 AM »

how did i miss this build

86bobbedtoy · « **Reply #118 on:** Mar 14, 2012, 04:55:06 PM »

whats new on this?

Dingman. · « **Reply #119 on:** Mar 14, 2012, 06:23:28 PM »

Kasey. Where's the updates Dood?

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

P-DiseToy24 [OP]

Related Topics