LOST TOOL BAG ON RUBICON

Started by TEXCRAWLER, June 28, 2010, 12:41:07 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1
User actions

TEXCRAWLER

June 28, 2010, 12:41:07 PM Last Edit: June 28, 2010, 04:00:35 PM by TEXCRAWLER
I lost my husky tool bag full of tools. Very large and very heavy lots of tools and some spare parts. It is grey and black. I lost it somewhere between little sluice box and big sluice. I ran into someone from Red bluff that had a broken rear d-line and broken birfield that I pulled al the way back to little sluice box. If someone has found or finds it I would really like it back. I'm sure I can come up with some insentive for the return of my tool bag.   Thanx,  Brent Wade

6/27/10
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

3.4Runner

#1
June 28, 2010, 01:31:13 PM
hope it gets returned... good luck!

Gixxer Jon

#2
June 28, 2010, 01:49:55 PM
What date were you up there when you lost it?
Hillcrest Crawlers
_________________________________
||_________||_________||__TOYOTA_||
||_________||_________||__________||

http://board.marlincrawler.com/index.php?topic=67011.0

HDcruiser

#3
June 28, 2010, 02:05:44 PM
What a bummer, i hope someone returns it to you.  :crossed:

gtoyonrocks

#4
June 28, 2010, 02:46:25 PM
That really sucks. My tools are near and dear to my heart... I hope you're able to track them down.
1985 toy, Hybrid 20r/22r on propane, 30splines, custom built leaf packs, welded front and rear diffs, dual ultimate crawler, full hydro, full exo, flat bed, 37' mtrs

Doof

#5
June 28, 2010, 03:09:30 PM
it was this last weekend. i saw him on the way out from the box sunday morning asking people as we went by if we had seen it... i hope somebody returns it to ya

good luck man

TEXCRAWLER

#6
June 28, 2010, 03:50:55 PM Last Edit: June 28, 2010, 04:00:22 PM by TEXCRAWLER
6/27/10

Thanx guys, Thats alot of money in tools to lose.
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

Gixxer Jon

#7
June 28, 2010, 04:54:07 PM
When and if you do get them back. a little bit of advice is to engrave your initials and the last 4 of your social so if they do get caught with them, its an instant bust...
Hillcrest Crawlers
_________________________________
||_________||_________||__TOYOTA_||
||_________||_________||__________||

http://board.marlincrawler.com/index.php?topic=67011.0

TEXCRAWLER

#8
June 28, 2010, 04:58:18 PM
Very true. I'd like to give people out there more respect than stooping to steeling tools.
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

Gixxer Jon

#9
June 28, 2010, 05:00:39 PM
a random thought popped in my head. Have you called the ranger stations thats near buy to see if they have have picked it up?


its worth a shot
Hillcrest Crawlers
_________________________________
||_________||_________||__TOYOTA_||
||_________||_________||__________||

http://board.marlincrawler.com/index.php?topic=67011.0

HDcruiser

#10
June 28, 2010, 05:02:34 PM
You can do what i have done is put your drivers licence on them, its a bit time consuming but worth it in the long run if something happens. I have personally retrieved several tools from other mechanics that work with me in the last 20 years and straight called them on it when ive told them my drivers licence is on the tool.. The look on their face is priceless!!!

TEXCRAWLER

#11
June 29, 2010, 05:58:09 AM
I'll give the ranger station a call. Mabey.......
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

TEXCRAWLER

#12
July 22, 2010, 10:19:30 PM
I haven't had any luck finding it
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

jimbo74

#13
July 22, 2010, 10:21:22 PM
if someone is going to steal your tools, they probably have a grinder... its easy to remove engraving and not render the tool useless
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

crazykooter

#14
July 22, 2010, 10:30:16 PM
Not if you also engrave it where most dont know where to look. It is time consuming but it can help. Tho I find the best way to well not really avoid it but make it less heart breaking is to go to the flee market and buy a set just for the trail. 
Anyways brent hope they turn up.  Tho you might want to post on pirate and ih8mud if you havent already.

ROCKO

#15
August 06, 2010, 02:12:25 PM
^^^^^thats the guy
JUST ANOTHER ROCK CRAWLER....
with a lot of good stuff

F@$K CANCER

Early

#16
August 06, 2010, 02:49:43 PM
http://board.marlincrawler.com/index.php?topic=72927.0;topicseen

:dunno: possible, the two threads were right next to each other
1994  4Runner w/ full doors

My hands are dirty cause i drive a yota

TEXCRAWLER

#17
August 06, 2010, 05:39:15 PM
Quote from: Early on August 06, 2010, 02:49:43 PM
http://board.marlincrawler.com/index.php?topic=72927.0;topicseen

:dunno: possible, the two threads were right next to each other

It wasn't mine. Thanx
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

TEXCRAWLER

#18
August 20, 2010, 01:09:05 AM
It would be nice if the tool bag who has my tool bag would give it back!!!
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

yoshaleng

#19
January 08, 2011, 10:16:18 PM
The bad thing about that is that there's not too many honest people out there anymore.
I hope you find it, as we all know or have experienced...tools are very expensive.

Sparkplug

#20
January 08, 2011, 10:21:09 PM
IM from RED BLUFF, I know EVERY TOYOTA in town, what did the toyota look like, are you saying they might have took the tools?
2008 TRD 4x4 Double Cab Tacoma
1994 12 valve 5 speed 4x4 single cab dodge 2500
1986 22re 5speed 3link 4runner (the beater)
1982 3rz swapped pickup (in progress)

TEXCRAWLER

#21
January 11, 2011, 06:58:50 AM
Quote from: YosHaleng on January 08, 2011, 10:16:18 PM
The bad thing about that is that there's not too many honest people out there anymore.
I hope you find it, as we all know or have experienced...tools are very expensive.

VERY EXPENSIVE!! I spent about $500 just replacing a trail tool bag.
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.

TEXCRAWLER

#22
January 11, 2011, 07:08:39 AM
Quote from: Sparkplug on January 08, 2011, 10:21:09 PM
IM from RED BLUFF, I know EVERY TOYOTA in town, what did the toyota look like, are you saying they might have took the tools?

It was a brown LWB single cab Toy truck on 35" MTR's. I truly belive this guy picked up my off my rig when he was behind me. He was a younger guy. He broke a front axle and rear D-line and I pulled him from Big Sluce to little Sluce. The guy that was with him was on leave from the Marine corps. He had just got out of boot camp. I'd be willing to drive up there to beat the hell out of someone for taking my took bag.
87' Samurai, Dimond-F, Tacoma-R, 5.29 F-detroit R-spool,6 Stud knukles, 4-link coils F&R, Duel Marlin chromoly 4.7 Toyota T-Case, 39.5 TSL's, 8000 lb winch, 6 piont cage, Full Hydro, Sidekick 1.6 16V, Thourly header, LongField 30 splines, 115" WB, crawlin @ 459:1

I could care less for turtle points.
Print
Go Up Pages1
User actions