Topic: What parts are interchangable?

[Dr Phat]

Right now Im trying to get my gears and new front pinion housing square away.

However, Im having a little trouble finding complete V-6 housing so I can use the carrier and then use the V-6 housing to set up a spare if/when my rear breaks.

My question is, what can I take from my stock 4cly housing that would fit the hi-pinion housing? Mainly the flange that connects to the driveshaft and holds the pinion is my main item. I have a rebuild kit for bearing and will probably get a grizzly or aussie locker so a carrier isnt a problem.

[79coyotefrg]

you wont be able to use the gears, bearings or carrier from the 4cyl but you can use the pinion flange

[Dr Phat [OP]]

Sweet thanks for the reply.

Pinion flange is just about all I need.

Ill just have to save up a little for a full carrier locker.

Toyota wanted over $1200 for an open carrier.

So lets see, ~$500 for Locker or $1200 for stock open carrier. Hmm...


Already have 5.29's for the hi-pinion along with reuild kit so I should be all set now aside from lockers.