Introducing Marlin Crawler Weekly Specials!

[BigMike]

We are gonna be a bit late with the next weekly special. I should have it up later tonight

Regards,
BigMike

[BigMike]

Ok guys!

This week's special is one FREE Gasket and Seal Rebuild Transfer Case Kit when you order one of the following products:

30-Spline Chromoly Front Output Kit

30-Spline Chromoly Rear Output Kit

Top Shift Conversion Kit

Dual Case Kit (MC07-XD)

Dual Case Kit (MC08)

This is a $49 savings and will get ya the most complete gear drive transfer case gasket and seal rebuild kit on the market, even includes two EcoSeals!

Click here for more information: http://www.marlincrawler.com/transfer-case/parts-upgrade/gasket-and-seal-rebuild-kit


Offer expires Friday, July 8 at 4pm PST.

BigMike

[BigMike]

This week we are knocking 15% off of our very successful UM07 Chromoly Marfield joint while also including 1 complimentary HD inner axle EcoSeal! These joints come with our extended warranty program.

This is a great time to replace your worn out axle joints or pick up some extra back-up insurance parts

This great offer expires in just 1 week so don't delay!

Product page: http://www.marlincrawler.com/axle/front-axle-parts/front-shafts/shafts-front-hilux/chromoly-um07-marfield-27-spline




Regards,
BigMike

[Wermz84]

I love this.  Every week it's like i'm pulling the lever on the gambling machine waiting for the jackpot (the part i want to order) to come up.  

[BigMike]

Hey guys, we are extending this week's sale until next week due to the 23rd Annual TLCA Rubithon event that we are attending!

So the UM07 + Free EcoSeal offer will continue until July 22nd! Thanks to all the orders so far!! Get those axles installed and put em to work for you!!

Regards,
BigMike

[BigMike]

This week's special is a good one!!

We are knocking 70-bucks off our hugely successful 25mm FULL steering upgrade kit, more than 15% off of retail!

This amazing offer ends next Friday at 4pm PST so don't delay! place your order today!

Parts are ready and waiting for you!

Product page: http://www.marlincrawler.com/steering/high-steer/25mm-steering-upgrade-kit-w-arms

[Wermz84]

       

The sale I've been waiting for!!



Damn it's 4pm now.  I will have to order Monday.

[BigMike]

[joeycool00]

shackles on sale for next week I hope???  please 

[BigMike]

Last week we put our Genuine Toyota transmission shift handle boots on sale -- it was a great product for this as we fulfilled many orders! Thank you to everyone who picked up some OEM boots at a great price!



This week we have our Heavy Duty Transfer Case Output EcoSeal on sale at a massive 25% off retail! This seal is advertised as a rear output, but it can also work as a front output seal as well.

Don't pass this great 25% off deal up!
Click here for more info: http://www.marlincrawler.com/transfer-case/parts-upgrade/heavy-duty-transfer-case-rear-output-seal



Regards,
BigMike

[BigMike]

This week we've got some good stuff going on !!

For the weekly special we are throwing in a FREE Knuckle Gasket & Seal Kit (a $50 value!) when you order a 25mm Steering Pin Upgrade Kit!! Remember this Knuckle Gasket & Seal kit also includes a pair of our front inner axle EcoSeals!
Click here for more info! http://www.marlincrawler.com/steering/high-steer/25mm-steering-pin-upgrade-kit

Offer expires next Friday, Aug 26th at 4pm PST.



In addition to the Weekly Sale, we've put together two great packages deals for you guys:

- Purchase a pair of USA-billet High Steer Arms, receive ( 8 ) FREE 12mm Upper Knuckle Stud Kits! ($60 value!)

More info: http://www.marlincrawler.com/steering/high-steer/billet-high-steer-arms





- Purchase our 25mm Steering Upgrade Kit (this kit includes the high steer arms), and you'll receive a combination of the above offers: ( 1 ) FREE Knuckle Gasket & Seal Kit and ( 8 ) FREE 12mm Upper Knuckle Stud Kits That's enough to replace all of your upper hardware

More info: http://www.marlincrawler.com/steering/high-steer/25mm-steering-upgrade-kit-w-arms





Don't pass up these great deals!!

BigMike

[twistedtoy92]

wasn't yesterday the 19th BigMike?

[BigMike]

wasn't yesterday the 19th BigMike?

lol whoops

[twistedtoy92]

just keeping you on your toes! 

[patches]

good thing i just ordered this kit 5 days ago..... perfect timing!

[KRT]

Ok you got me, I ordered the 25mm kit. 

[BigMike]

^ Thanks for all the orders guys! We helped a lot of people save some dough on their Crawlers!!


This week's Special Product is our American-made high quality U-Bolt Flip Kit! Now through next Friday, save 15% on this great kit! All sizes and models apply

Product link: http://www.marlincrawler.com/suspension/full-kits/u-bolt-flip-kit



Regards,
BigMike

[emsvitil]

Good timing on the flip kit, as I was just looking at this............

How far do the threads stick up on the rear kit when installed?  (no lift blocks, maybe 1 alignment shim)


I think that for what I want to eventually do, I think I need the rear kit with the 4 long u-bolts.............



Since the individual u-bolts are all the same price, can I just call this in and get the discount, or do you need to add another selection to the website?


thanks

[BigMike]

The length will vary depending on what perch you are using, and with what axle, so I think it would be better if I simply reported back with height measurements of the bolts come Monday. In fact, this is information that ought to be on the product website itself. If I don't reply regarding this by this time next Monday, shoot me a PM to remind me about it.

Thanks emsvitil & have a great weekend,
BigMike

[emsvitil]

In the ubolt section:

Basic dimensions include:

U-Bolt diameter: 9/16
Round short overall height: 8"
Round short thread height: 3"
Round long overall height: 9"
Round long thread height: 5"
Square overall height: 8"
Square thread height: 3"
Nut height: 20mm
Washer thickness: 4.5mm


I assume that overall height means that, and NOT straight section length...........


Any problems getting the "special length" kit at the sale price?


thanks

[KDXSR5]

You have got to be kidding me. I ordered these early this morning (Friday). Oh well, I guess that is how it goes.

[BigMike]

In the ubolt section:

Basic dimensions include:

Ha! You are correct, the lengths are listed there (http://www.marlincrawler.com/suspension/parts/u-bolts) I'm the one who measured them even

I assume that overall height means that, and NOT straight section length...........

Your assumption is correct Sir. I will get the straight section length as well as the threaded section length to boot and reply back.

Any problems getting the "special length" kit at the sale price?

All three kits are available at the sale price. Let us know if you want to build a custom kit with a different bolt configuration and we'd be happy to accommodate ya at the same sale price. We only carry those three u-bolts however...

good thing i just ordered this kit 5 days ago..... perfect timing!

You have got to be kidding me. I ordered these early this morning (Friday). Oh well, I guess that is how it goes.

Yeah, we know this will happen from time to time but its just the luck of the draw with impromptu special product offerings. We are happy to offer great products at great deals week-to-week and encourage everyone to take advantage of em all! It's our way of adding some spice to your projects

Regards,
BigMike

[BigMike]

Hey guys,

I will be gone until the 19th, so CruzrDave is gonna take over this thread for a few weeks CruzrDave

Have a great labor day weekend everyone!
BigMike

[emsvitil]

And the new weekly sale is...................

[patches]

Iittsss a mystery!!!!

[kneedownnate]

Looks like the flip kit is on sale for another week 

[emsvitil]

I don't need another one..............

[GNasty 82]

Looks like it's been updated to the full face diff armor http://www.marlincrawler.com/armor/axles/full-face-differential-armor, but what's up with putting stuff on sale that's outta stock?

[patches]

 

[BigMike]

Hey guys!! I am back in the swing with Weekly Sales Took a bit of a hiatus with me being gone for 2 weeks, Round Up, and whatnot

This week we have our Heavy Duty 13-application 4-pattern 30-spline transfer case flanges on sale at a WHOPPING 35% OFF!

These flanges fit chain drive transfer cases ranging from 1988-1995 V6 Hilux & T100 and 1995+ Tacoma/Tundra/FJ Cruiser/4Runner. Here is a list of the available flange patterns:

RN Hilux 79-83 front CV driveshaft RN Hilux 84+ non-CV driveshaft RN Hilux 84-95 front CV driveshaft RN Hilux 84-95 front CV driveshaft RN Hilux 86-87 Turbo t/case outputs VN Hilux 88 t/case outputs VN Hilux 88-95 front CV driveshaft

1988-1995 Hilux, 3VZ-E, 5spd 1988-1995 4Runner, 3VZ-E, 5spd 1995-2004 Tacoma, Auto/5spd 1996-2002 4Runner, Auto/5spd 2005+ Tacoma, Auto/5spd 2007+ FJ Cruiser, Auto/5spd

Click here for product information: http://www.marlincrawler.com/axle/drive-shafts/four-pattern-30-spline-flange

An innovative intermediate shoulder length makes the flange compatible with both front and rear t/case outputs.

• 135% thicker cross section.
• Cross-Compatible between front and rear transfer case output use.
• Increased spline length for maximum spline contact.
• Compatible with 13 different Toyota driveline applications.