Author Topic: My AX10 and XR10 (Read 38775 times)

Rockcrawlintoy · « **Reply #60 on:** Jun 12, 2011, 09:47:02 PM »

i got all my parts installed. Installed a castle creations sidewinder v2, novak rockstar 45t motor. 13t pinion and lipos. it fully gets it now. i was crawlin with my buddy with a venom creeper and i was takin line he could only dream of. ill try and get pics soon i dont have my camera with me

46&2 · « **Reply #61 on:** Jun 17, 2011, 05:17:12 PM »

Nice, I need to get lipos bad.

Rockcrawlintoy · « **Reply #62 on:** Jun 17, 2011, 10:47:42 PM »

man such a difference and a 45t motor is super sick too. i have so much power. im climbing stuff i would have never thought of.

46&2 · « **Reply #63 on:** Jun 17, 2011, 11:37:35 PM »

Quote from: Rockcrawlintoy on Jun 17, 2011, 10:47:42 PM

man such a difference and a 45t motor is super sick too. i have so much power. im climbing stuff i would have never thought of.

So good speed when you need it but still able to crawl? I've currently got a 65 turn in my AX10 but keeping the 27 in the Honcho. AX10 is retarded slow lol.

Rockcrawlintoy · « **Reply #64 on:** Jun 18, 2011, 11:22:35 AM »

yeah its still able to creep along. i did swap out the pinion to a 13t because i lost the stock one.

Rockcrawlintoy · « **Reply #65 on:** Dec 04, 2011, 08:49:24 PM »

Did my first comp today. I got a few things I need/want to change. First is the servo. I need some more umph in that department. Im also goin back to a different shock. The gmades are cool I will keep for a scaler but i need something more tunable. I am also goin to get a battery/ servo tray to get my batteries up front. Thats phase one. Phase 2 is a new chassis. I think I am goin to design my own so we will see what I some up with.

Rockcrawlintoy · « **Reply #66 on:** Dec 07, 2011, 08:35:37 PM »

ordering a gatekeeper chassis and some losi 4 inch shocks this weekend should be sick

Rockcrawlintoy · « **Reply #67 on:** Dec 09, 2011, 09:06:07 AM »

So what body should i get. Im thinkin a bug body. I dont know any ideas

46&2 · « **Reply #68 on:** Dec 09, 2011, 01:30:55 PM »

Quote from: Rockcrawlintoy on Dec 09, 2011, 09:06:07 AM

So what body should i get. Im thinkin a bug body. I dont know any ideas

I'm not really a fan of bug bodies but if its what you want. Just going for light weight and low profile or what?

Rockcrawlintoy · « **Reply #69 on:** Dec 09, 2011, 03:45:38 PM »

i have always liked the bug body. I am goin to try and do more comps so i want to be competitive. there are a few others that ikinda like as well

Rockcrawlintoy · « **Reply #70 on:** Dec 09, 2011, 03:50:20 PM »

http://www.rpphobby.com/product_p/ax04026.htm
http://www.rpphobby.com/product_p/jci0057.htm
http://www.rpphobby.com/product_p/pro323840.htm
http://www.rpphobby.com/product_p/par10223.htm

i like those

rockin86runner · « **Reply #71 on:** Dec 10, 2011, 01:34:32 PM »

a buddy i do comps with runs the jconcepts body it looks really sick on the ax10

Rockcrawlintoy · « **Reply #72 on:** Dec 10, 2011, 06:20:19 PM »

yeah i saw that one too i kinda like it i think the axial hardline my get it. we will see. i have thought about an xr10 as well

Rockcrawlintoy · « **Reply #73 on:** Dec 17, 2011, 06:49:45 PM »

santa came early. got a gatekeeper chassis, traxxas big bores, 1000mah lipos, and a new servo. its pretty sick i just need to figure out how to mount the body

Rockcrawlintoy · « **Reply #74 on:** Dec 26, 2011, 09:16:20 PM »

Has a gatekeeper chassis, traxxas big bores, losi springs, airtronics servo, CC sidewinder sv2, novak rockstar 45t motor with MIP shafts. I want to get a new body and some rims so I can mount my old proline hammers. I am goin to the dunes and might spring for a 3s lipo and a hobby partz brushless motor in a month or so

Drew

46&2 · « **Reply #75 on:** Dec 27, 2011, 12:46:47 PM »

How do you like those shocks? Also curious to hear your long term review of that chassis. Looking good.

Rockcrawlintoy · « **Reply #76 on:** Dec 27, 2011, 01:02:48 PM »

so far the shocks are really nice. super smooth and seem like they will hold up. The chassis is nice too almost all my tq twist is gone with it. def worth the money.

Rockcrawlintoy · « **Reply #77 on:** Jan 02, 2012, 09:37:28 PM »

just went through and oiled the bearings and greased the gears in the front tomorrow ill do the rear and the tranny. sounds so much better already

Rockcrawlintoy · « **Reply #78 on:** Jan 07, 2012, 06:52:26 PM »

Quote from: 46&2 on Dec 27, 2011, 12:46:47 PM

How do you like those shocks? Also curious to hear your long term review of that chassis. Looking good.

the chassis is sick takes gnarly lines i need to tune it a lil bit after the comp today i got some good input from others that have the chassis.

yotatough · « **Reply #79 on:** Jan 08, 2012, 05:23:34 PM »

are you running a BEC at all?

Rockcrawlintoy · « **Reply #80 on:** Jan 08, 2012, 07:55:35 PM »

nope. im goin to need to get one soon since i am goin to 3s .

yotatough · « **Reply #81 on:** Jan 08, 2012, 08:47:41 PM »

Do you know if running one will make the servo stronger? My servo is weak.

Rockcrawlintoy · « **Reply #82 on:** Jan 08, 2012, 09:20:26 PM »

what servo do u got and what esc? are u running lipos? There are times my servo is weak and its because the internal bec on my esc isnt good enough. so it should help also u might have a servo that is on its way out

yotatough · « **Reply #83 on:** Jan 08, 2012, 09:35:27 PM »

Servo is a brand new hitech hs-5645mg, currently running rooster crawler, with 2s, sometimes 3s. Will be replacing the rooster with a sidewinder soon.

Rockcrawlintoy · « **Reply #84 on:** Jan 08, 2012, 09:57:04 PM »

with 3s u need to have a bec forsure. the internal bec on the rooster may not be up to the task. The sidewinder is a great esc i really like mine.

Rockcrawlintoy · « **Reply #85 on:** Jan 08, 2012, 10:11:27 PM »

i had a comp yesterday that I forgot to talk about. I got third. I got a few things I need to tweek for the next one but so far its runnin great. I killed one course with a -13 which was awesome.

Rockcrawlintoy · « **Reply #86 on:** Jan 10, 2012, 08:39:40 PM »

beefy toobs ordered

Rockcrawlintoy · « **Reply #87 on:** Jan 14, 2012, 10:44:13 PM »

got my beef toobs installed no more knuckle movement

ninja turtle · « **Reply #88 on:** Jan 15, 2012, 07:05:16 AM »

Quote from: Rockcrawlintoy on Jan 14, 2012, 10:44:13 PM

got my beef toobs installed no more knuckle movement

nice. did you fix the pinion angle or add any more caster?

Rockcrawlintoy · « **Reply #89 on:** Jan 15, 2012, 10:55:33 AM »

Quote from: ninja turtle on Jan 15, 2012, 07:05:16 AM

nice. did you fix the pinion angle or add any more caster?

no i will later i dont have any tools here at all.

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Rockcrawlintoy [OP]

Related Topics