newbe from WA

[tanabuse]

well im from washington just got into toyotas in the past year and just geting my so its drives stright lol well i got an 81 long bed sr5 all black inside red outside. all dumys work oil, volts, tack, speedo,and temp. the heater cranks and its got this sick moon roof ive never seen befor on a first gen. it has two windows in it one for driver one for passenger .I bought the truck for $500 with bad trans and motor and i picked up a 77 20R and put it in runs like dream. But i just found out the frame is bent drivers side looks a like rear end the frame holes in front of and behind the stock shock tower are bowed. ive ben driveing it for 4 months now and it was fine but i rebilt my front axel and put  a marlink on it with no stableizer on it. could this cause the truck to want to kinda wander on the road. i think im gonna put it back on my be it will get rid of this wandering i have. i also have an 80 with waganeers springs. 33  tsl swampers 87 wide rear locked with spool, 13 1/2' rancho rear 14' bilstein in front, sliders, dual transfers, l52 5 speed out of an 83, FROR x menber and skid and an all pro hysteer. i just got v6 rotors and calipers and a rear disk kit form trail tought to use stock rotors and calipers from front and i just recently picked up a 1' bore master out on in 2000 taco xcab TRD. it helped so much with sotck drums and rotos up front i dont think i even need the v6 but hell if i got it right  



http://board.marlincrawler.com/index.php?topic=65719.msg801217

[DD85runner]

  to 

[tanabuse]

here is my red truck

[tanabuse]

and here is my wheeler in these pix i had no front drive line at all

[tanabuse]

more pix

[tanabuse]

and hey let me ask you this should this be a post card pix i think so

[tanabuse]

here is sun roof

[tanabuse]

and here is the inside of my red truck

[tanabuse]

and more

[86rustbucket]

   from fresno

[tanabuse]

thanks

[axled89]

sweet ride man.  i'm down in oregon.

[tanabuse]

here are some more shots

[tanabuse]

more

[axled89]

cool!   

[83 Crawler]

  im in oregon.

what springs are you running up front?

[toe]

 

[tanabuse]

im in oregon.

what springs are you running up front?

they are seven leaf jeep waganeers dont know what year

[tanabuse]

pixs after finishing stock to krazy mods

[Rocksurfer]

  II 

[83 Crawler]

i want some of those for my truck now! they flex like crazy

[tanabuse]

here are my new knuckles and breaks all new!!

[tanabuse]

the little bit of rust is from leaveing them in my shed for two nights its wet here in wasington

here are my new knuckles and breaks all new!!

[axled89]

that little bit of rust isn't going to hurt them.

[tanabuse]

hey you saw the post  of my duals all broke well i just fixed it all today my wheeler is back up and running ive ben down only since the day after xmiss  
and here is one pix testing it out in my driveway
those are my springs all most maxing out

[nightcrawler16]

talk about flex...

[83 Crawler]

ya no kidding i think im going to do waggy springs now

[axled89]

do you have bump stops on there??

[tanabuse]

no not at all  i need to put them on damit i have them to what i think i might do is put the ones i bought on the axel and stock ones on the top

[tanabuse]

here are more felx pixs the last one i call "is this how its done "