newbe from WA

[axled89]

yea it's all right if you don't care about the springs.      alot of people don't.   lot of people have miss match springs that they just rebuild evry few trips anyways.

[tanabuse]

well check this out i got these springs as a set with lift shackles and a wide rear from a guy who ran them for 4 years wheeling them in moab and all over the place he told me no problems he told me they were felxy wow he was right i only paid 200 and my buddy has ben running wagys up front and chev 63' rear for 5 years now they have only saged over the years and he sweares up and down these springs are the !. and i do care about my springs those bump stops are going in tomarow i just got my day driver going so i can work on my wheeler more  

[axled89]

yea iv'e herd lot's about those springs to.    good call on the bump stops.

[tanabuse]

so i dug up all the bump stops today and put them in my pile of to put on. but i was at my loca napa today grabing some oil  and asked them about a larger oil fliter for the my pick up and they said i got two to choose from twice the size of normal and triple when he said i that  l    asked for the largest one. Well to get to the point check it out and are there reasons i shoulden't use this  large of a filter well my input on the question is the more oil  the better right  

[84krawler]

that thing is massive

[toe]

so i dug up all the bump stops today and put them in my pile of to put on. but i was at my loca napa today grabing some oil  and asked them about a larger oil fliter for the my pick up and they said i got two to choose from twice the size of normal and triple when he said i that  l    asked for the largest one. Well to get to the point check it out and are there reasons i shoulden't use this  larget of a filter well my input on the question is the more oil  the better right   

I think you're compensating for something else that's small...............

[tanabuse]

yeah lack of power and wanting to rebild the dam thing  its got at least 190000 on it at least the the odometer said 85000 and that  has to be at least that its an 80

[tanabuse]

ah whatever you say man. but every one knows what they the biger the better

I think you're compensating for something else that's small...............

[axled89]

 

[tanabuse]

what? am i dum i dont think so

[axled89]

do you ever get down to oregon, tanabuse?

[mudaddict]

welcome from washington as well i see reiter must be around the seattle area.

[tanabuse]

no not really i need to start traveling more

do you ever get down to oregon, tanabuse?

[SloCrawler]

looks good

[tanabuse]

so i got out my spare front axel today and started prep for a knuckle turning here are some pix and i must say this axel is in great conditon

[axled89]

   lookin good.

[tanabuse]

plans are six shooter knuckles 30 spline longfields and hub gears  v6 breaks and 1.5'' wheel spacers  im gonna run it open till i get the money to go 4 locked

[83 Crawler]

wait TG six shooters?

[tanabuse]

yeah lack of power and wanting to rebild the dam thing  its got at least 190000 on it at least the the odometer said 85000 and that has to be right its an  80 but its still running strong 170 in number one

[tanabuse]

yeah are they not just parts am i not suspost to run there  while on marlins bord

wait TG six shooters?

[83 Crawler]

its   Chinese metal why not go with the marlin 25 mm kit?




http://pirate4x4.com/forum/showthread.php?t=852179

[tanabuse]

because then you would have to still run a bareing made by marlin and you will have to still replace them and get them from marlin. and they are probley excluisve to marlin there is no going to randys ring and buying a knuckle rebild kit to have an extra on the trail. now i think marlin should give you at least one extra spare/trail bareing for when your wheeling in that kit.

and well about trail gears whatever i dont wanna agrue about  bull crap i just wanna talk about my truck and wheeling and my bild we all run different butt have the same hobby

[83 Crawler]

go for it then?

[tanabuse]

ill just test their its a bit late for me i allredy got the knuckles and arms and king pin setup ill let you all know about them
other then that i really like being on this bord and talking to all you guys i really like   and i dont preffer what so ever trail gear at all. I preffer all marlin  products i run his dual adaptor and v6 breaks. and I know i spent a good   on their but now looking at that link you posted on the broken pins in their arms i will never spend a penny on  there F****** Chinese metal ever again  and i'm a dumbass for buying it in the frist place but it just looked so beef you know
but one thing is im just running 33'' and stock ifs gear box and i just got the 33'' their like brand new so ill be running them for a while i dont think i will have a problem with them and the thred about those arms the guy was running hydro and 40" so ill take my chances

[83 Crawler]

just trying to save you a  im not starting beef dude i  yout truck and your flex

[tanabuse]

hey thanks for the info  i diden't really think you were  your just trowing your side out there for me 

thx  i know how that is you got n e pix of your truck

[axled89]

   glad to see you worked it out hah haah.  yea trail gear does suck.  if i can get a better quality part for a little more change  then so be it.   speacily on my toy that i'm out on the trail with.  aways from home.    

[tanabuse]

well here are pixs right  befor i broke my crawl box on the day after x miss i my flex too  thats my buddy driveing

[83 Crawler]

you need a new bed lol

[tanabuse]

if you say so i like it like that lol