Topic: 82 SR5 PU long bed bobbed 12"s nice lift flex is amazing. Want 2300.00

[crazykooter]

I am sure yall remember my build thread and what but I found a 80 1st gen which has nearly every option besides the moon roof.  Its too clean to pass up but I need to sell my rig 1st and finish this other rig.  I want 2300 obo.  Here is some pics of it but basically it has brand new gears front and rear 5.29s with a spool in the rear open front.  Full high steer with very recent marllin hd front axle seals and a ton grease !   I have 2 diff drive shafts for the rear but one I want to keep.  Doesnt matter for most part.  One of them is the stock long shaft and the other is a rebiult cv shaft which is made to fit a long bed 1st gen.  The bed was bobbed 12"s And I plan to finish making it look super clean.  Has a few dings and minor dents from this years MCR run.  Engine has bout 12k on it and it runs very strong.  I am planning keeping my trans which  a personally built L52HD.  If 2300 is too high then throw some offers out there. 
I will post pics tomorrow and its late. I have to finish swapping trans in a awd rav4 so I am gonna be pretty busy

Call me @ 925-270-5314 Josh

[thegoofster21]

so the truck will need a trailer to move?

[crazykooter [OP]]

If I sell it completely as it is the truck will drive perfect and wheel very well, but I am not sure what its worth as it is.
Heres a basic list of whats been done.

Marlin 4" rear springs
Ruf springs up front custom packed giving the truck almost 6"s lift
Boomarange shackles in the front and custom ones in the front.
22R engine which is complete and only has around 10-12k miles on it.
L52 trans
5.29 gears in front
5.29 gears rear with a spool
32-12.50-15 BFG MT's with about 40% or more tread
has a new brake master cylinder as well as new clutch master and slave.
Sliders are umm well trail gear but they were on sale so I couldnt pass it up.
The front drop hanger moved front axle 2"s plus
Since MCR a few months ago the bed has a little bit of damage to it and the cab is tweaked a little.  Wanted to get a donor cab to repair it but decided it would fine for a trail rig.
Also front axle was very recently rebuilt using Marlins HD seals.
Custom tcase/trans cross member which worked well on the trail

I know its not the sweetist 1st gen out there but ive always spent a lot of time working on it to make everything work perfect.

If I decide to keep my front axle,trans and both 3rds what do yall think it would be worth.
I do have a spare 3rd with 4.11's welded and I can get another 3rd stock 4.10s to throw in it. Plus I have a L52 sitting here I will check it out and if all seems good I can put it in.
I will leave tires and rims if wanted.

[thegoofster21]

so if no front axle and no trans id say $1000 at best

[fatkidskickrocks4x4]

location?

[crazykooter [OP]]

Sorry its posted in my name stuff to the left but didnt put it in the post.  Pleasant hill,ca

[fatkidskickrocks4x4]

so how much without the front axle and trans. i have both. i'm looking to build another truck