Author Topic: High Lakes Anyone? (Read 30991 times)

86bobbedtoy · « **Reply #150 on:** Jan 04, 2010, 07:28:13 PM »

Quote from: Goose on Jan 04, 2010, 05:35:02 PM

me, dingman, and a couple others are talking about going up wed. morning,

anyone else wanna go with us?

F U
lol I want to roll but I still need like 3 days to finish it up.

Dingman. · « **Reply #151 on:** Jan 04, 2010, 11:40:40 PM »

What do ya gotta do heath?

I might be replacing my springs tomorrow along with the bushings..

I have a massive death wobble since swapping the 40's on and its never been this bad before..
Might rotate the tires and see if that helps if not then ill be swapping out my springs. otherwise we will be driving up to the mountains at less than 35mph..

Anyone else wanna go?

yota_krawler · « **Reply #152 on:** Jan 04, 2010, 11:42:34 PM »

just leave an hour before everyone else

Dingman. · « **Reply #153 on:** Jan 04, 2010, 11:45:27 PM »

haha..

It has to do with the tires for the most part, cause the 35's are smooth as glass.

I need to figure this out.. Not sure what the deal is.. Went over all the steering components in the front end and everything is now tight.. Also tightened the shackles (which helped the most) and i just think the damn bushings are finally soo bad once it starts wobbeling it won't stop.

Ill rotate the tires in the morn and if that doesn't help then i guess ill be swapping out my springs.

86bobbedtoy · « **Reply #154 on:** Jan 05, 2010, 12:04:28 AM »

Quote from: Dingman. on Jan 04, 2010, 11:40:40 PM

What do ya gotta do heath?

I might be replacing my springs tomorrow along with the bushings..

I have a massive death wobble since swapping the 40's on and its never been this bad before..
Might rotate the tires and see if that helps if not then ill be swapping out my springs. otherwise we will be driving up to the mountains at less than 35mph..

Anyone else wanna go?

alignment
fill knuckles
redo trinion play
muffler
paint

Dingman. · « **Reply #155 on:** Jan 05, 2010, 12:07:34 AM »

Ah... forget the muffler and the paint..

Get the top three done tomorrow and then we can all head up wed...

86bobbedtoy · « **Reply #156 on:** Jan 05, 2010, 12:08:52 AM »

I have work, cant not do it

Dingman. · « **Reply #157 on:** Jan 05, 2010, 12:11:17 AM »

DAMMIT!!!!! LOL

Well i got practically this whole month off.. so....

Lets all plan a run!

86bobbedtoy · « **Reply #158 on:** Jan 05, 2010, 12:18:36 AM »

Quote from: Dingman. on Jan 05, 2010, 12:11:17 AM

DAMMIT!!!!! LOL

Well i got practically this whole month off.. so....

Lets all plan a run!

oh for sure

and I also need to finish my power steering and get a steering stabilizer

Dingman. · « **Reply #159 on:** Jan 05, 2010, 12:26:30 AM »

i REALLY need to move my steering box forward

yota_krawler · « **Reply #160 on:** Jan 05, 2010, 12:29:02 AM »

i think that might be one of your biggest issues mike

Dingman. · « **Reply #161 on:** Jan 05, 2010, 12:30:12 AM »

Yea right..

With everything going on right now in my life thats not the biggest issue..

I do need to get it done though

IronClad · « **Reply #162 on:** Jan 05, 2010, 12:33:45 PM »

if i can find a shortside shaft today i might be up for it if you guys are still going

yota_krawler · « **Reply #163 on:** Jan 05, 2010, 01:07:45 PM »

for a 44?

IronClad · « **Reply #164 on:** Jan 05, 2010, 01:20:45 PM »

10bolt

yota_krawler · « **Reply #165 on:** Jan 05, 2010, 03:17:07 PM »

oh, i got one sittin in the back of my truck but its a 44

Dingman. · « **Reply #166 on:** Jan 05, 2010, 03:54:27 PM »

Anyone else wanna go?/

probably leave magalia at 9:30 ish

bigarms23 · « **Reply #167 on:** Jan 05, 2010, 06:37:26 PM »

you can use the shaft from the d44 on your 10bolt

IronClad · « **Reply #168 on:** Jan 05, 2010, 09:23:37 PM »

so tell me how im suposed to fit a 30 spline shaft in a 28spline hole?

yota_krawler · « **Reply #169 on:** Jan 05, 2010, 09:33:23 PM »

i didnt know they were different.... thats why i offered

bigarms23 · « **Reply #170 on:** Jan 05, 2010, 09:37:39 PM »

i heard they where interchangable guess i heard wrong

IronClad · « **Reply #171 on:** Jan 06, 2010, 07:16:54 AM »

yeah they dont.. now they DID make a 30spline 10bolt that was in like 88-89 8lug suburbans and realllly rare that could be interchangeable BUT the compression angle is different on the splines (gm used 40 deg if i remember right and dana is 35) so it would eventually kill itself and the side gear due to wear

lilbuddy · « **Reply #172 on:** Jan 06, 2010, 08:28:00 AM »

Quote from: 86bobbedtoy on Jan 05, 2010, 12:18:36 AM

oh for sure

and I also need to finish my power steering and get a steering stabilizer

My roomate (Jud) has a marlin steering stabilizer he wants to sell.... Its in Chico

86bobbedtoy · « **Reply #173 on:** Jan 06, 2010, 09:21:57 AM »

condition?
complete?
price?

thanks

Dingman. · « **Reply #174 on:** Jan 06, 2010, 12:36:47 PM »

So nobody made it up today.. Figures.

Wanna plan some other time?
I wanna head up friday

86bobbedtoy · « **Reply #175 on:** Jan 06, 2010, 04:14:18 PM »

sunday?? ?? ??

Thomas P · « **Reply #176 on:** Jan 07, 2010, 07:02:37 AM »

i may be down for sunday....... if i can get my house fully prepped for paint on monday

Dingman. · « **Reply #177 on:** Jan 07, 2010, 11:21:04 AM »

I am down for whenever..

IronClad · « **Reply #178 on:** Jan 07, 2010, 12:24:47 PM »

sat would work way better for me but w/e.. got my gas leak fixed just gotta do the shaft now and some other little odds/ends

P-DiseToy24 · « **Reply #179 on:** Jan 07, 2010, 05:05:31 PM »

Tomorrow it is probably a little later thought 4ish, but its in the air still. Mikes on his way to my house for some 30's........ finally

and I believe were gunna go test um out so whos up for a run?

P-DiseToy24 [OP]

Related Topics