HAPPY BIRFDAY MPA!!!

Started by PA_taco_13, August 01, 2009, 05:45:17 AM

0 Members and 1 Guest are viewing this topic.

PA_taco_13

Happybirthday honey!!!   :smooch: :love:      love you very much, even though your 27 now   :shhh: :gap:     
learn the hard way 

"my dixie wrecked"
    
east coast crawler

Cheesemaker

Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

Bazzi

4runner body on a hilux frame = Hi-Runner.
2,4 dti duals 2,28 x 2,28 to 8" 5.71 with arb´s  and 39,5" trxus
gathering parts for my goal which is
350 Chevy 700r4 auto to 2.28 x 4.70  and 4.88 9,5" cruisers diffs,diamondaxles and cable lockers, 44" richard cepecs

Stocker

Happy Birthday, young lady!   :beerchug:
My goal in life is to be as a good a person as my dog already thinks I am.

If you don't learn something every day, you're not paying attention.

kneedownnate

Happy birthday, hope it's a good one!
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

79coyotefrg

AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

ninja turtle


JanMarie13

Awwwww, thanks guys!   :wiggle:    And thanks honey!  :smooch:


LOOK what Brian gotted me for my birfday!!!    :hyper:   I LOVE IT!  :love:




We're going to go do some shopping, because I have the FABULOUS "problem" of not being able to fit any of my clothes anymore!   hahaha.  See, 4 months ago I set myself a goal that I was going to lose 30 pounds by my birthday.  Well yesterday morning I woke up and weighed in and took my measurements, and I've lost....

30.8 pounds and 17 inches!!   :D

So I'm feeling great, and I'm going to go have a wonderful birthday!  Thanks guys!!   :smooch:
RIP Kyle, we love and miss you man.  :smooch:
Quote from: KYOTA on October 03, 2009, 10:33:31 AM
thanks for the smooch I miss you too !  :yesnod:

ninja turtle


Toymin8r

YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE
AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE.

IF YOU CAN'T FIX IT WITH A HAMMER, YOU HAVE AN ELECTRICAL PROBLEM.


QuoteBeccaLoo24 – i can toss grown men.... so dont doubt me

KYOTA


Dingman.


abnormaltoy

The things that come to those who wait, may be the things left by those who got there first.

I contend that for a nation to try to tax itself into prosperity is like a man standing in a bucket and trying to lift himself up by the handle.
-- Winston Churchill

Censorship, that most subtle tool of oppression, the tool of the fearful and small minded. 8/15/2008

"It is interesting that we are asked to NOT judge all Muslims by the actions of a few lunatics. Too bad gun owners can't get same judgment."
Travis Tritt (I know!)

4LoRunner

Sas'd '86 4Runner, 22RE-T, 4.88s, Dual Stock T-Cases, Locked F/R, 35" MTR's.
http://board.marlincrawler.com/index.php?topic=55751.0


brockbuilt85

When in doubt, skinny pedal!
Turd Box Build:
http://board.marlincrawler.com/index.php?topic=50894.0

Wermz84

Happy BirfDay MPA!!!   :hyper:   :woohoo:
I like to Drive!

unclejpl4x4

happy birfday my cookie queen :woohoo:  :cheer:  :boobs:  :hyper: 
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

KYOTA

how are we feeling this morning? :boozer: hope you had a good one

JanMarie13

Ohhh....    feeling ok.  hahaha.  Little slow on the wake-up today.  We got to bed about 3 a.m. and have been trying to wake up since about 10 a.m.  We had a good time yesterday, went and did some shopping, visited my sister-in-law, had cake at my Dad's house and then went and did a little muddin.

Thank you guys all so much for the birthday wishes!  :smooch:   
RIP Kyle, we love and miss you man.  :smooch:
Quote from: KYOTA on October 03, 2009, 10:33:31 AM
thanks for the smooch I miss you too !  :yesnod:

KYOTA

woo sounds like you had fun, muddin you mean in the truck I hope  :talkingn:

Toymin8r

YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE
AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE.

IF YOU CAN'T FIX IT WITH A HAMMER, YOU HAVE AN ELECTRICAL PROBLEM.


QuoteBeccaLoo24 – i can toss grown men.... so dont doubt me

Rocksurfer

Happy belated birthday, sorry I was moving yesterday and didn't get my puter hooked back up till late yesterday. (yes it was one of the 1st things I put back together) :gap:
The Ghost-Rider/Ghost Runner

No matter how far you fall, the ground will always catch you

*FFC*

Well dang I missed it :down:

Happy Birthday Jan!
"Yesterday is history, tomorrow is a mystery, today is a gift - that's why they call it the present." - RW Emerson -

JanMarie13

Hey you late folks is just fine with me!  Just keeps the fun going a little longer!   :yupyup:

Thanks!!   :wiggle:
RIP Kyle, we love and miss you man.  :smooch:
Quote from: KYOTA on October 03, 2009, 10:33:31 AM
thanks for the smooch I miss you too !  :yesnod:

unclejpl4x4

so where are this mudding pics ?
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly