Author Topic: PROJECT WHISKEY TANGO (update half doors) (Read 12057 times)

thegoofster21 · « **Reply #30 on:** Jun 10, 2009, 08:36:16 PM »

not to bad just take your time

Straight_Axle_Swap_86 · « **Reply #31 on:** Jun 10, 2009, 08:40:41 PM »

one door is done except for paint and a little more grinding since my welds are not as pretty as others.... here is some pics.

toyotanner · « **Reply #32 on:** Jun 10, 2009, 09:15:25 PM »

Quote from: toyota_smasher on Jun 08, 2009, 10:19:28 AM

Yeah im in school but its finals day so we arent doing anything.
But i wont be able to go this weekend because im going to a rock crawl comp in bend and then after that im leaving for flordia for like 4 weeeks

my buddy with a datsun is entering in that competition i was thinking about going down there just to watch it but we'll see...

half doors look good

Straight_Axle_Swap_86 · « **Reply #33 on:** Jun 10, 2009, 09:23:14 PM »

i wanted to enter it but i have a ghetto rigged gas tank set up and it requires a cage as stated in the rules. you live in clackamas right?? if so i ma right in gladstone. we should get a group sometime soon and go wheelin.

toyotanner · « **Reply #34 on:** Jun 10, 2009, 09:29:05 PM »

yeah i'm the clackamas area. yeah for sure its hard getting a truck and trailer lined up to go wheelin so i'm trying to make my truck somewhat streetable again... but this is the next time im going wheelin http://board.marlincrawler.com/index.php?topic=58924.0;highlight=4th+of+july

Straight_Axle_Swap_86 · « **Reply #35 on:** Jun 10, 2009, 09:34:55 PM »

alright, we might be going to goat sunday for a day trip... we take back roads to hillockburn rd. if u got lights at least in the front you will be fine driving the yota out there.

toyotanner · « **Reply #36 on:** Jun 10, 2009, 09:38:34 PM »

well for the most part my truck is legal i just need a nice driveline made for the rear cause i have duals and just havent got around to having a driveline made that was balanced and what not.... oh and i need to put a cat on to pass deq.... but i can always get a trip permit.

Straight_Axle_Swap_86 · « **Reply #37 on:** Jun 10, 2009, 09:40:57 PM »

i happen to have 1 maybe two drive lines you could possibly hack up and weld together just somethin to get u by for a quick trip... just an idea.

LilChief87 · « **Reply #38 on:** Jun 10, 2009, 09:41:20 PM »

looks good

toyotanner · « **Reply #39 on:** Jun 10, 2009, 09:47:44 PM »

hmmm well as of now its kind of apart trying to get some little things done for the 4th of july but... i'll keep those drivelines in mind cause i'm gonna try and make one and see how that goes... if not i might hit you up on that driveline and just cut and weld it so i have something for the street and i can just switch out to my beefier one on the trails haha.

but if i get pretty far on my truck who knows i might be able to go on sunday.. i can also see if i can get someone else to go and just ride along.

Straight_Axle_Swap_86 · « **Reply #40 on:** Jun 10, 2009, 09:54:14 PM »

yeah man, just let me know.

toyota_smasher · « **Reply #41 on:** Jun 10, 2009, 11:09:45 PM »

Looks good
If you get them both done tommarrow and put them on come over and we can test them out in the back yard lol i added a couple more rocks to the rock crawl and we got a bunch of logs set up

Straight_Axle_Swap_86 · « **Reply #42 on:** Jun 10, 2009, 11:12:52 PM »

thats sweet maybe i will just come over even if i dont get them on... are you out of school for summer yet?
$That\'s Gay$

toyota_smasher · « **Reply #43 on:** Jun 10, 2009, 11:16:41 PM »

Yeah my last day was tuesday
I wont be able to wheel mine (brokin ber field)

but yeah you should bring it over

Straight_Axle_Swap_86 · « **Reply #44 on:** Jun 10, 2009, 11:23:13 PM »

i might... i need to put my knuckle back together and get some diff fluid in the diff. i also fed up on my door handle so i gotta jep some jeep style hood latches and use them on the door so it will stay shut.

toyota_smasher · « **Reply #45 on:** Jun 10, 2009, 11:51:47 PM »

Ok well just let me know tomarrow if you want to

SR5Yota · « **Reply #46 on:** Jun 11, 2009, 10:28:00 AM »

WHEELIN ON SUNDAY IM IN!

toyota_smasher · « **Reply #47 on:** Jun 11, 2009, 06:32:38 PM »

Do u have a account with pirate4x4
If so you should put some pics of your rig on my post
http://www.pirate4x4.com/forum/showthread.php?t=783754

89sastoyo · « **Reply #48 on:** Jun 13, 2009, 12:05:36 AM »

where at in gladstone are you? I live in milwaukie could probably come kick it give you a hand with your truck or what ever sometime. My license is suspended untill july but when I get it back im always down to make trips to goat or browns what ever.

Straight_Axle_Swap_86 · « **Reply #49 on:** Jun 13, 2009, 03:14:05 PM »

i live on the clackamas river. how did it get suspended?

toyotanner · « **Reply #50 on:** Jun 13, 2009, 09:24:17 PM »

Quote from: Straight_Axle_Swap_86 on Jun 13, 2009, 03:14:05 PM

i live on the clackamas river. how did it get suspended?

Straight_Axle_Swap_86 · « **Reply #51 on:** Jun 14, 2009, 12:23:04 AM »

maybe i am just hammered but i am not sure whats funny, i guessed i missed the joke, damn, i missed a really funny joke that upsets me...jk so you down to wheel tomorrow at goat???

89sastoyo · « **Reply #52 on:** Jun 14, 2009, 11:15:56 PM »

tanner seems to think its funny that I'm retarded and got a DUI but oh well. Did you end up going to groundhog?

toyotanner · « **Reply #53 on:** Jun 15, 2009, 01:18:33 AM »

well atleast you were wheelin

Straight_Axle_Swap_86 · « **Reply #54 on:** Jun 15, 2009, 05:43:11 PM »

duii's no fun i got one myself, driving home from the bar in my toyota, no headlights and one brake light at 3 am...no we did not go wheelin my buddie was swapin a tranny in his 2wd toyota. and for groundhog no, i had to pick my parents up from the airport....i am gonna post some pics of my and chad (sr5yota) screwin around in my back yard though.

Straight_Axle_Swap_86 · « **Reply #55 on:** Jun 15, 2009, 05:51:58 PM »

Halladay · « **Reply #56 on:** Jun 16, 2009, 10:52:34 AM »

what kind of welder do you have ?

toyotanner · « **Reply #57 on:** Jun 16, 2009, 10:56:19 AM »

BTW must be nice to have a car lift

hilux-1983 · « **Reply #58 on:** Jun 16, 2009, 10:59:06 AM »

Straight_Axle_Swap_86 · « **Reply #59 on:** Jun 16, 2009, 06:27:47 PM »

the welder is a 220 lincoln wire feed, couldnt tell ya the model though,it has a 2 pound spool in the gun no more f'ed up wire. thats how i welded those aluminum cans together, switched the wire and the gas..... ya dude the car lift is sick. me and my dad put it in about a month ago. i think everyone should have at least one lift.

Straight_Axle_Swap_86 [OP]

Straight_Axle_Swap_86 [OP]

Straight_Axle_Swap_86 [OP]

Straight_Axle_Swap_86 [OP]

Straight_Axle_Swap_86 [OP]

Straight_Axle_Swap_86 [OP]

Straight_Axle_Swap_86 [OP]

Straight_Axle_Swap_86 [OP]

Straight_Axle_Swap_86 [OP]

Straight_Axle_Swap_86 [OP]

Straight_Axle_Swap_86 [OP]

Straight_Axle_Swap_86 [OP]

Related Topics