Topic: help dana 60 question

[thegoofster21]

not sure if some sort of locker or limited slip it acts like it is open when i spin one side the other side does not spin, if someone can tell me what it is i would appreciate it

[Rockcrawlintoy]

first off its a 14 bolt not a 60 how many cross pins does it have. if it has 3 its a gov lock if it has 4 its an open diff

[thegoofster21 [OP]]

i was told it was a 60 but im not a 1ton guy, thanks. can i still weld the spiders?

[Rockcrawlintoy]

you prolly can. i dont know i have never tried.

[thegoofster21 [OP]]

is this the cross pin. thanx

[KYOTA]

yes. 3 gov lock - 4 open
the spider gears are at the other end of those pins

[Duffil]

yes that is a cross pin. Yes it is a 14B. I know nothing else.

[bhigdon101]

weld the hell out of it   

[thegoofster21 [OP]]

its a 4pin and thanx so much it made it a lot easier!  site rocks

[Redbeard1]

Just find a Gov Lock to put back in it lot stronger than welding it up. You can pick them up cheep. 

[TIMS89CRAWLER]

Just find a Gov Lock to put back in it lot stronger than welding it up. You can pick them up cheep. 

I would just weld it..... its free and if you do it right you will never break it!

[thegoofster21 [OP]]

thanks guys

[TIMS89CRAWLER]

  no prob buddy! there is a really good thread on here somewhere on good ways to weld up a 14 bolt.... I will see if I can remember where exactly it is....

[thegoofster21 [OP]]

COOL THANKS MAN