UM06 Marfields??

[ToYocRawleR]

Anyone runnin these?  Just curious how you like em if you are, Thanks

[Joey88RUNR]

I am running them, with stock inners with aussie locker, had em in almost a year, no problems so far

[ToYocRawleR]

Good Deal! What size tires you runnin?

[Joey88RUNR]

33's  someday ill have some real tires

[ToYocRawleR]

No biggy im just curious how big of tires these will hold up to.

[-Matt-]

i seriously beat the out of mine and have held up well. iv had them for a little less than a year, but i go wheelin quite a bit. im locked and run my 37's as like 3-4psi. if you don't have money to piss away on longs then i would recommend them to anyone that legitimately wheels. im really stoked on mine, especially since they have a 2 year warranty. i figure in less than 2 years ill have 1tons under my runner so it works out. they are pretty legit with 37s but from what iv heard if you push a bigger tire you are headed back to breaking birfs again.

[ToYocRawleR]

hmmm good to know!  I think 37's are about as big as i want to go right now so thats tight!  Your runnin stock inners i assume?

[greenjacob]

i ran stock iner axles and the marfeild birfs had a 22r with 39.5s locked frount and ran the piss out of it broke a stock iner axle i relly thibk there worth 300 still have mine and they work badass

[808]

300? i thought they were 175?

[-Matt-]

ya im using stock inners. the stock inners are pretty strong especially if you are only running 37s i wouldn't worry about those, its very rare that people break inners or rear shafts if you aren't running anything over a 37

300? i thought they were 175?

175$ a piece

[jonathan82toy]

The marlin crawler formula toy also runs the UM06.

[ToYocRawleR]

Thats pretty sweet i think i am going to definetly invest in a pair of em, Thanks for all the input!!

[808]

ya im using stock inners. the stock inners are pretty strong especially if you are only running 37s i wouldn't worry about those, its very rare that people break inners or rear shafts if you aren't running anything over a 37 175$ a piece

ah ok

[808]

btw kace nice truck you got such a deal on it.

[lucky7]

Ran them for 4 years broke one after sheering all four steering studs but it's still rebuildable outer is fine just wasted the bearings.

[ToYocRawleR]

thanks bob, i started a lil build up thread on it.

These marfields are definetly a good buy from all the testimonials!

[88_Pathy]

I have them, run 37s e-locked. Great birf for the coin.