How to blow up your Computer CPU

Started by BigMike, November 08, 2008, 05:07:55 PM

0 Members and 1 Guest are viewing this topic.

BigMike

If you are a computer nerd such as myself, you will be entertained by this. :thumbs:


I have a couple of friends from Hungary and these guys sounds exactly like them, so this vid seems a bit closer to home for me :gap:

I've always wanted to do this myself with a couple old PCs I have laying around but now someone else did it for me :gap:

If nothing else, perhaps you'll get a good chuckle from it :thumbs:



Original site: http://video.google.com/videoplay?docid=5393904704265757054&q=amd

QuoteThey overclock a cpu over 4ghz, remove the heatsink, and boom! "Theres a hole in the motherboard!"


http://video.google.com/googleplayer.swf?docid=5393904704265757054&hl=en&fs=true

WARNING: The "S" word is repeated in this video, sorry!




:rofl2: :rofl: :o
Check out our new Rock Crawling Videos!
2016 56-speed 580:1 Tacoma Rock Crawler   
1981 36-speed 511:1 3RZ-FE Rock Crawler
1987 6-speed Supercharged 4A-GZE MR2
Instagram: @SlowestTacoma
Things are only impossible until they are not.
"The worst of both worlds, the best of neither." -abnormaltoy
"An informed question. But difficult to answer. I am what you see." -Nanaki

brainlessfool

A good day working, that's just sick :reg:

Shamb

I saw this about a year ago, looks like they overclocked the crap out of it...

funny, amazing how it blew a hole through the desk.

R.I.P to my Papa, I miss you pops......

Knowledge is power  www.pirate4x4.com/forum

New Buildup in process 85' 4runner "Bad Decisions"
http://board.marlincrawler.com/index.php?topic=52566.0

Check out my 1-ton build up thread
http://board.marlincrawler.com/index.php?topic=22600.0

Duffil


Cheesemaker

Yeah they used AMD processors, and they don't do to well when they are overclocked!  But I love the hole in the desk!
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

Duffil

Quote from: cheesemaker on November 08, 2008, 07:20:13 PM
Yeah they used AMD processors, and they don't do to well when they are overclocked!  But I love the hole in the desk!
Now I see why my system runs so damn hot. maybe I oughta back it down a bit. :haha:

yotamaster

1969 Jeep Jeepster Commando

chevyLUVtoyota

we  did that back in school for fun but we go lots of smoke and stuff with the boom.

Shamb

do you have to run any specific "process intense" program or just idle on the OS while removing the heat sink?

R.I.P to my Papa, I miss you pops......

Knowledge is power  www.pirate4x4.com/forum

New Buildup in process 85' 4runner "Bad Decisions"
http://board.marlincrawler.com/index.php?topic=52566.0

Check out my 1-ton build up thread
http://board.marlincrawler.com/index.php?topic=22600.0

unclejpl4x4

i don't know about this one ......................... 

where was the black  smoke of computer parts death. 
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Toymin8r

There was a link on that video's page to a youtube video showing comparisons between a couple of Intel processors and AMD processors.   It show why Intel products are superior in quality.

http://www.youtube.com/watch?v=XgOmMAasqto
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE
AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE.

IF YOU CAN'T FIX IT WITH A HAMMER, YOU HAVE AN ELECTRICAL PROBLEM.


QuoteBeccaLoo24 – i can toss grown men.... so dont doubt me

unclejpl4x4

build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Duffil

I don't think that is fair. Just because an intel chip will handle more heat doesn't really make it a better CPU. "better", IMO is tested in terms of what a processor needs in terms of power consumption, processes required while running and the necessary chipsets on the MB. AMD boards are always much cleaner and run faster and smoother with less crashing than an Intel in my experience. Yes, they run warmer, but that is the price you pay for performance, and hell...that's why they have water cooling. :twocents:

:rant:

Plekto

The crazy thing was how the thing literally blew itself up in under a second.  AND put a big hole in the table...

Toymin8r

Quote from: Duffil on November 11, 2008, 05:57:13 PM
I don't think that is fair. Just because an intel chip will handle more heat doesn't really make it a better CPU. "better", IMO is tested in terms of what a processor needs in terms of power consumption, processes required while running and the necessary chipsets on the MB. AMD boards are always much cleaner and run faster and smoother with less crashing than an Intel in my experience. Yes, they run warmer, but that is the price you pay for performance, and hell...that's why they have water cooling. :twocents:

:rant:


Its not that Intel can handle more heat it just has thermal protection built into it.   I work on computers for a living and I can honestly say that 100% of the time when I work on an AMD computer that had a lousy ten dollar fan fail it cooked the motherboard and procesor too.  As far as crashing goes it is very rare to have hardware be a cause of a crash these days unles your using the cheapest crap out there.   
YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE
AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE.

IF YOU CAN'T FIX IT WITH A HAMMER, YOU HAVE AN ELECTRICAL PROBLEM.


QuoteBeccaLoo24 – i can toss grown men.... so dont doubt me

Duffil

I was going to launch into a dissertation here, but I don't see the reason. It's simply a difference of opinion based on experience.


Toymin8r

YOU ONLY NEED TWO TOOLS IN LIFE - WD-40 AND DUCT TAPE. IF IT DOESN'T MOVE
AND SHOULD, USE THE WD-40. IF IT SHOULDN'T MOVE AND DOES, USE THE DUCT TAPE.

IF YOU CAN'T FIX IT WITH A HAMMER, YOU HAVE AN ELECTRICAL PROBLEM.


QuoteBeccaLoo24 – i can toss grown men.... so dont doubt me

jimbo74

:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~