3rd Gen 94 Flatbedtoy SAS

[flatbedtoy]

lookin good man I really like this thing...

Thanks Man!

[Richmondo]

Looks good. I like the square tube stinger and those slider look beefy

[flatbedtoy]

Thanks! Those sliders have already taken a couple of good hits and shugged them off like they were nothing. My door and rocker panels would have been toast without them!

[flatbedtoy]

 Worked on the flatbed some Friday, still got a little ways to go,



Wanting to have plenty of room for coolers and camping gear, planning on mounting spare at roughly 45 degree angle off back edge of bed.
Did a little wheeling Sunday afternoon,                                          
Lost driver headlight (already replaced by time time picts was taken) and parking light. Bumper and stinger held up very well! 

[46&2]

Nice work, I really like your rig. Keep up the good work 

[unclejpl4x4]

wow i have never seen anything like that before.

I would of maybe added a flat part at the top  like at where the lowerlip  is on the toolbox   maybe a good spot for a HI-lift and on the other side shovle/axe


I like it tho

[flatbedtoy]

wow i have never seen anything like that before.

I would of maybe added a flat part at the top  like at where the lowerlip  is on the toolbox   maybe a good spot for a HI-lift and on the other side shovle/axe


I like it tho

Actually I was thinking about something along those lines, I definately want the Hi-Lift mounted on the outside of the bed. I'm going to move the gas filler to the right bedside and finsh enclosing the front of the bed with expanded metal hopefully this friday.

[flatbedtoy]

 Well, it's been another busy weekend workin on the truck. I added in some more bracing for the bed sides, mounted Hi-lift and shovel on the left side. Did some more work to my sliders and fabbed up a tire carrier.Will probalbly re-do it later, I haven't decided. Going wheelin all next weekend, so I went ahead and Lincoln locker the rear. Front was already done a while back. I've got the truck loaded down pretty good in the picts with parts, tools, cooler ect. She sits pretty nice loaded down.




I'll take some good picts on the trail next week and post'em up when I get back. 

[46&2]

Thats a really cool idea how you mounted the shovel and high lift. How do you plan to utilize the space on the other side opposite where you mounted the high lift and shovel?

[flatbedtoy]

Thats a really cool idea how you mounted the shovel and high lift. How do you plan to utilize the space on the other side opposite where you mounted the high lift and shovel?

I'm not really sure yet about the right side. At the front corner you'll notice where I boxed in a section and didn't cover it with expanded metal. That's where I'm going to end up putting the fuel neck door. After I get all that done, I'll look at putting something on the right side a little more closely.

[unclejpl4x4]

ahh I see  but know the right side is naked ...........   looks like a good spot for a keg

[flatbedtoy]

ahh I see  but know the right side is naked ...........   looks like a good spot for a keg

I like your ideas!!!!!

[TIMS89CRAWLER]

x2 keg would be perfect!!!

[Halladay]

FLATBEDTOY.... hey you got any pics of the bumper being built? i really like it. i have square tube sliders and a round tube stinger and i like my sliders more than my bumper so im going to build square tube bumpers. what size sqaure tube is that? how thick? how was it bending it?