Official Crawler # Registry

JumppinJoe · June 02, 2003, 05:38:41 AM

Joe Honoroff
MC07 #970
Don't know how I evered lived without it!

wheelerfreak · June 12, 2003, 06:14:01 AM

I have 4.70 gear set 373, personally installed by Marlin at the Chilli Challenge 5 years ago. Soon to be joined by a dual case kit! :chug:
Jason Martinez

Tom_Boyd · June 16, 2003, 01:05:56 PM

I have #850.

blacktoy · June 16, 2003, 03:14:42 PM

I have #1442! 8)

BigMike · June 17, 2003, 04:27:34 AM

Hey whatt'a ya know? An update!

surlynkid · July 08, 2003, 10:32:20 AM

where are the numbers? are they engraved in the side. mine came ready to go as a unit.

BigMike · July 08, 2003, 05:37:11 PM

Yes, it should be stamped onto the passengers side of the unit.

BigMike

BirdDog · July 09, 2003, 12:42:53 PM

John Loveall

4.7:1 set # 95
MC08 # 47

Tulare Ca.

Many thanks to Marlin

tarabull4x4 · July 11, 2003, 09:14:56 AM

Dual case adapter# 145x- Tara Fey (3rd Owner I think)
Dual case adapter # 060 - Monty Peterson
Monty has 4:70 gear also but I don't know his #. I just went and got his # off his truck broke( I mean parked ) in my driveway. Its just the motor.

surlynkid · July 11, 2003, 03:17:55 PM

I have MC07 #1715

My V6 adapter has nothing engraved on it except for Marlin Crawler. So, what number is it??

Scott Landon
Houston, TX

Ryan · July 21, 2003, 05:51:19 PM

I have dual case #1608 Ryan Handley

Ferg · July 23, 2003, 06:02:11 PM

Got me a really early version - 4.70 gears #003X, and an Ice Crawler p/n 50-5905 s/n 040X. 2 piece gears and still going strong!

Marlin Rules!

4.3L V6 - '85EFI 5spd - '80 short bed frame - '85Xcab body, cut to fit frame.

Rock_Starr · July 29, 2003, 11:30:46 PM

My 4.7 gear set was purchased in end of april or begining of may 2002
Ben Nelson in San Luis, if you feel like looking it up Mike. I was a part of one on Rons messes. Not to bash Ron, we all make mistakes.

wheelerfreak · July 29, 2003, 11:39:36 PM

Dual case adaptor MC07U # 1740, just installed today!!

BigMike · July 30, 2003, 10:53:20 PM

Hey an Update!

Quote from: Rock_Starr on July 29, 2003, 11:30:46 PMwe all make mistakes.

Isn't that true.

I've made a couple myself this week.

AZROCKER7 · August 14, 2003, 02:28:34 PM

MC08 #053 AZROCKER7{MICHAEL DOW 1988 TOYOTA P/U TUCSON,AZ.

Laughter · August 16, 2003, 02:19:54 PM

Daniel Johnson, MC07 # 1765

HFCRAOffroading · August 25, 2003, 04:31:42 PM

MARLIN CRAWLER CASE #1067.

Installation in progress!!!

Jack

Gargoyle · August 31, 2003, 07:44:16 AM

MC09 Billet 4Runner/Tacoma/T100/Tundra Adapter #:
#020 front/#023 rear (Tacoma)

Red Monkey · September 23, 2003, 06:26:29 PM

Big Mike,
Add me to the list.
I have Dual case #620 and my 4.7 rear box is #280.
Hal Hall

Dirt Mover · September 25, 2003, 09:24:19 PM

Dual case adapter #257, 4.7 in the rear 514
Rob Fresno Ca.

godzilla · September 26, 2003, 11:07:07 AM

Mike Shilling
Dual case adapter #1645 (on a tacoma)
v6 adapter plate for the w59 4cyl tacoma tranny. dont know the number.

toysfreak · September 29, 2003, 07:00:53 PM

I have # 241 4:7 T.C., bought in 1998 I think ....Stew

Moabtoy42 · October 12, 2003, 02:32:25 PM

Brett of Lake Stevens, WA.. Gear driven Tranfer case to R150F V6 Trans/w 4.70:1 Low Range Gears, #1043T

BlueRubi · October 22, 2003, 04:17:13 PM

Crawler #1572

BlueRubi · October 29, 2003, 06:57:01 PM

Dove in and bought the 4:70 gear set #1107

vikingsven · December 02, 2003, 01:00:52 PM

Crawler #1842 (MC07) Misha Robinson. 1988 Pickup

jeffs84runner · December 10, 2003, 10:28:42 PM

Dual Stockers #617 - (installed a couple months prior to this picture being taken back in 2000)

This is after Marlin spent countless hours answering all my questions on the phone, (sure everyone knows that one!

), then after receiving my adapter in the mail, I realized my donor t/c was also a forward shifting case. Marlin offered to swap my case for a normal one, (and since shipping would be so much, I said I could drive down). Then Marlin said, well if you drive down, bring both cases with you so I can take a look at them.

When I got there at like 8pm he not only did what he said, but inspected and cleaned the hell out of both cases, then used all new shiny hardware, and spent till after 1am answering even more questions I had again. (Thanks for the Pizza too!!! that we picked up in the MR2 in it's early years).
$Beer Chug\'n$

I learned more in that one day than I have any other. Imagine having 5+ hours to think of any possible question to ask Marlin! hehehe This is why I will always give him my $$$ whenever possible!!!

And a big thanks to Rocky too for answering all my stupid V6 swap Q's the other day. You see my new girlfriend just happens to live in Fresno... hehe, so makes it easy to stop by the shop!

Thanks again Marlin!

Jeff Mackey
San Jose, CA

LCOwner · December 12, 2003, 05:31:21 AM

Tim Groh (LCOwner) 4.70 gears #1132 and
MC20 #21

STUBBYTOY · December 16, 2003, 09:49:30 PM

Hey Mike, Say Hi to Marlin...I own Adapter MC05#009 and 470 gearset #975....Matt Stobbe aka Stubbytoy

News:

Official Crawler # Registry