Author Topic: Official Crawler # Registry (Read 233090 times)

foxfab · « **Reply #120 on:** Dec 20, 2003, 12:48:34 PM »

I just took delivery of:

23 Spline MC07 Dual Case Adapter #1888
and
4.7 23 spline gear set #1134T

and I have my old 21 spline Dual Case adapter #539 on deposit from a kid in New Hampshire.

Wildman · « **Reply #121 on:** Dec 24, 2003, 06:07:53 PM »

Just purchased mine from Cory at wayoffroad in NH. Its #1669 Install is in the works right now. Saving up for a Budbuilt

BigMike · « **Reply #122 on:** Dec 24, 2003, 06:43:21 PM »

updates updates updates updates !!

STUBBYTOY · « **Reply #123 on:** Dec 25, 2003, 10:38:54 PM »

Hey Mike, My adapter is a MC05 not a V6, it originally belonged to the Crazy Canadian, my friend Richard Sheridan. Sorry should have specified

BigMike · « **Reply #124 on:** Dec 25, 2003, 10:50:54 PM »

Hey Stubs, I got it! Tell Richard hello from Marlin and Co. for us!

Happy Holidays,

BigMike

Atazman · « **Reply #125 on:** Dec 28, 2003, 08:08:42 PM »

#033 (MC22) Don Evans
#1168 (MC 4.7:1 Gears) Don Evans
#034 (MC21) Don Evans

LCOwner · « **Reply #126 on:** Dec 30, 2003, 11:44:51 AM »

posting for Brent Drum 4.70 gears #1135

booger weldz · « **Reply #127 on:** Dec 31, 2003, 03:02:30 PM »

paul ryun

crawler adapters (678) and (213x)
4.7:1 gearset (575)

barneym · « **Reply #128 on:** Jan 01, 2004, 11:26:52 PM »

Ultimate Crawler - MC05-U #302 - Barney McNamara

4RnrRick · « **Reply #129 on:** Jan 09, 2004, 08:03:05 AM »

#928 (MC07) [4RnrRick] Rick B, OR

I also have a set of Marlin 4.70 gears in the rear case but I got them from All-Pro

so I don't think the ever when throught Marlins shop since they didn't have a number stamped on them.

Anyway, Dual Cases with 4.7 gear is one of the best mods I'v done!

85RunnerAZ · « **Reply #130 on:** Jan 13, 2004, 12:43:15 PM »

MC07 #1910 Damen Doty Mesa, AZ
4.7:1 #1173 David Vander Haar Mesa, AZ

90TOYPU · « **Reply #131 on:** Jan 26, 2004, 01:26:45 PM »

Todd Phelan
Chico, CA
MCO5 #115
4.7 gears #178

reklund5 · « **Reply #132 on:** Jan 30, 2004, 09:18:24 PM »

MC07 #1868

Ryan Eklund, Albuquerque, New Mexico
84 4x4

stone4x4 · « **Reply #133 on:** Feb 05, 2004, 08:34:22 AM »

i got #197
Mc 05 from tec guru i am(stone4x4) my name is King Stone from NC sounds like a joke

but my dad is a nut job i'm :shocking:my name aint SUE
the t cases are a21 up front and a 23 in rear
marlin is the best this guy,took time out of his life to help a poor confused red neck learn how to make it crawl
cant wait to see the front wd t case

Prismo · « **Reply #134 on:** Feb 19, 2004, 03:45:22 PM »

I had to dig out my reciept.
Dan Smith
Monroe,WA
MC05-u23 - #364T
470-c23 - #338t

83 Toys · « **Reply #135 on:** Feb 21, 2004, 10:24:42 PM »

#1983 (MC07) Tim Collins, Crawler Employee

toyrocs · « **Reply #136 on:** Feb 24, 2004, 12:00:15 AM »

fwd box 555v6x 2.28,aft box 105v6x 4.7.both have 23 splines . mc offshore r150f (5.15 1st gear) current crawl ratio 252 :1 desmond caravella

KYOTA · « **Reply #137 on:** Mar 02, 2004, 08:44:38 PM »

MC08 #74 4.7 23 spline

stealthrunner · « **Reply #138 on:** Mar 09, 2004, 02:23:59 AM »

Put me down for a MC-7 With #1953 name is Bill Woodland/stealthrunner,Thank every body at marlin for the best products for toyotas.

Thanks Marlin!!!!!!!!!!!!!!!!!!!!!

WHITE_TRASH · « **Reply #139 on:** Mar 16, 2004, 08:14:13 PM »

Mco7 # 1661 Ryan McGhan WA.

Ive also got 23 spline 4.7's but I was too excited and I put them in before I wrote down the #.

Brandon · « **Reply #140 on:** Mar 22, 2004, 08:26:45 AM »

Mike, want me to ditch the thread at pirate?

Rollover Roy · « **Reply #141 on:** Mar 23, 2004, 05:23:37 PM »

"Rollover Roy" Dew
Crawler #280
4.70 #1216

firemanjohn · « **Reply #142 on:** Mar 23, 2004, 05:28:43 PM »

I recived my gears and adapter in Dec but just been lazy to post it on here, I have #1169 4.7 gears and #24 MC09 in my tacoma. In VA

mudguts · « **Reply #143 on:** Mar 30, 2004, 08:03:31 PM »

Hey there, I have invoice#11458 from 11-16-1995. The invoice says it's for units #19 and #20, these were purchased by my uncle, and installed in his 85 pu and my 84 4Rnr, "which was owned by my cousin "Ranger Russ" at the time". Are these units stamped with there serial #'s?.
If they are, where would I find it?
Thanks, John in Coalinga Ca.

BigMike · « **Reply #144 on:** Apr 01, 2004, 11:58:09 AM »

Quote from: mudguts on Mar 30, 2004, 08:03:31 PM

Hey there, I have invoice#11458 from 11-16-1995. The invoice says it's for units #19 and #20, these were purchased by my uncle, and installed in his 85 pu and my 84 4Rnr, "which was owned by my cousin "Ranger Russ" at the time". Are these units stamped with there serial #'s?.
If they are, where would I find it?
Thanks, John in Coalinga Ca.

Wow I dont know for sure with a # that early. Impressive to see they are still in service. If they are stamped, then it should be on the drivers side of the first housing (reduction housing) stamped vertically.

BigMike

BigMike · « **Reply #145 on:** Apr 01, 2004, 12:00:17 PM »

Quote from: KYOTA on Mar 02, 2004, 08:44:38 PM

MC08 #74 4.7 23 spline

KYOTA,

You forgot the number of your gear set!

BigMike · « **Reply #146 on:** Apr 01, 2004, 12:03:45 PM »

updates updates!

BigMike · « **Reply #147 on:** Apr 01, 2004, 12:05:50 PM »

Quote from: Brandon on Mar 22, 2004, 08:26:45 AM

Mike, want me to ditch the thread at pirate?

I dont even care about that list. Im sure its much larger but its not the official list. This is the official one. You can keep it up if you wish, but actually I dont want to put their names on here unless they are a member here. Become a member and you can get added to the official list 8)

BigMike

BigMike · « **Reply #148 on:** Apr 01, 2004, 12:12:00 PM »

Quote from: 83 Toys on Feb 21, 2004, 10:24:42 PM

#1983 (MC07) Tim Collins, Crawler Employee

Your number matches the year of your rig. Sweet! 8)

mudguts · « **Reply #149 on:** Apr 01, 2004, 02:19:32 PM »

Quote from: BigMike on Apr 01, 2004, 11:58:09 AM

Quote from: mudguts on Mar 30, 2004, 08:03:31 PM
Hey there, I have invoice#11458 from 11-16-1995. The invoice says it's for units #19 and #20, these were purchased by my uncle, and installed in his 85 pu and my 84 4Rnr, "which was owned by my cousin "Ranger Russ" at the time". Are these units stamped with there serial #'s?.
If they are, where would I find it?
Thanks, John in Coalinga Ca.

Wow I dont know for sure with a # that early. Impressive to see they are still in service. If they are stamped, then it should be on the drivers side of the first housing (reduction housing) stamped vertically.

BigMike

OK, I'll have a looksee when I get home. Thanks.

BigMike [OP]

BigMike [OP]

BigMike [OP]

BigMike [OP]

BigMike [OP]

BigMike [OP]

BigMike [OP]

Related Topics