Author Topic: silver bullet, 2002 tacoma crawler (Read 38590 times)

booger weldz · « **Reply #90 on:** Apr 18, 2008, 02:07:03 PM »

pulling the rear axle out to take it to the gearman for 6.17's, detroit and the toyota flange for the drivehsaft

MiniSimp · « **Reply #91 on:** Apr 18, 2008, 02:27:48 PM »

Quote from: booger weldz on Apr 18, 2008, 02:00:54 PM

dont you live in sonora, or have family?? ill probably be playing around at niagara rim a bunch this summer

I'm usually up there or inbetween during the weekends. I'll hit Niagara with you for sure.

ROKTOY829 · « **Reply #92 on:** Apr 18, 2008, 03:12:44 PM »

Measured one here at work and it's 12" at the trans crossmember & 15.5" at the frame 265/75r16 tires. i'm looking at doing links on my rear and i got 3" allpro springs on front and just doing alittle research so i it will be level.

booger weldz · « **Reply #93 on:** Apr 18, 2008, 04:29:46 PM »

i finally finished up the back end of the rocksliders and mounting point to the frame. i wanna run a piece of dimple dyed 10 gage plate between the rail and the frame and put a battery in each of the spaces inside the bedside..i got a dual battery kit from 12voltguy.com, wow, nice stuff!

THK Matt · « **Reply #94 on:** Apr 19, 2008, 04:57:01 AM »

Quote from: booger weldz on Apr 18, 2008, 04:29:46 PM

i finally finished up the back end of the rocksliders and mounting point to the frame. i wanna run a piece of dimple dyed 10 gage plate between the rail and the frame and put a battery in each of the spaces inside the bedside..i got a dual battery kit from 12voltguy.com, wow, nice stuff!

dont if you plan on bashing this sucker.

Reynolds · « **Reply #95 on:** Apr 19, 2008, 09:30:39 AM »

Quote from: HO on Apr 19, 2008, 04:57:01 AM

dont if you plan on bashing this sucker.

Why not? Obviously he'd build a shield for the battery.

kiyul4130 · « **Reply #96 on:** Apr 19, 2008, 11:40:03 AM »

on the left side is a rockslider with a decent little hoop/bump. on the inside will be a battery box of some sort. should be fine.

THK Matt · « **Reply #97 on:** Apr 19, 2008, 02:30:51 PM »

if yall find no problems.... go for it

Yoat Goat · « **Reply #98 on:** Apr 19, 2008, 11:57:33 PM »

I get wood over this project.

tom w. · « **Reply #99 on:** Apr 20, 2008, 08:50:23 AM »

Quote from: HO on Apr 19, 2008, 04:57:01 AM

dont if you plan on bashing this sucker.

Yeah Paul, listen to him. He's obviously built a lot more rock crawlers than you have...

crawlerdan · « **Reply #100 on:** Apr 20, 2008, 08:52:07 AM »

Quote from: tom w. on Apr 20, 2008, 08:50:23 AM

Yeah Paul, listen to him. He's obviously built a lot more rock crawlers than you have...

booger weldz · « **Reply #101 on:** Apr 20, 2008, 09:12:58 AM »

well, i actually have to agree...my brother(electrical enginneer) came over and was talking...since ive got gel cell batteries, if one did get crunched id be hard pressed to get it to quit shorting out and likely have a disaster on my hands...i was gonna have a bit more side protection there, but now im putting the viair compressors in those spots and the batteries back in the bed(safety first)...

booger weldz · « **Reply #102 on:** Apr 20, 2008, 09:14:21 AM »

i got the tube work nearly completed on the front inner fenders, you can barely see the tube inside the fenderwell, like planned

booger weldz · « **Reply #103 on:** Apr 20, 2008, 09:16:15 AM »

this notch was kinda aPITA since i had to keep hammering the tube in place to see what i wanted to trim, over and over

booger weldz · « **Reply #104 on:** Apr 20, 2008, 09:17:23 AM »

Quote from: Yoat Goat on Apr 19, 2008, 11:57:33 PM

I get wood over this project.

quit poklin that thing at me!!!!!

Thomas P · « **Reply #105 on:** Apr 20, 2008, 09:44:25 AM »

those fender hoops are the

! Looks sooooo nice

booger weldz · « **Reply #106 on:** Apr 20, 2008, 11:46:05 AM »

finished the shift for the crawl box!!!!LOL!!!!

jimmy frye thought it was the phone, or he just wanted to rest some nuts on his homo chin

booger weldz · « **Reply #107 on:** Apr 20, 2008, 11:52:06 AM »

hopefully i can lure some girlies into my truck with the new custom shifter

snowshoebrue · « **Reply #108 on:** Apr 20, 2008, 11:55:46 AM »

looks sick

booger weldz · « **Reply #109 on:** Apr 20, 2008, 01:48:06 PM »

early tacoma booster---homemade 1/2'' adapter plate---GM one ton master cylinder with SAE to metric for existing toyota brakelines

Yoat Goat · « **Reply #110 on:** Apr 20, 2008, 09:59:30 PM »

Quote from: MiniSimp on Apr 18, 2008, 02:27:48 PM

I'll hit Viagara with you for sure.

Fixed it for ya!

TIMS89CRAWLER · « **Reply #111 on:** Apr 21, 2008, 08:47:44 AM »

i love that tube under the fender but i think its a little too much work for me..... this thing is sick as hell

booger weldz · « **Reply #112 on:** May 16, 2008, 12:21:49 PM »

damn near done, need to install the crawl box and redo driveshafts for wheeling. in order to start driving it around in 2wd next week ive gotta put in the brakelines, high pressure power steering line and shorten the rear panhard bar by about 1/2''(too long and out of heim adjustment)