PRACTICALLY ANYTHING YOU WANT (missouri)

[Jordan7118]

Go ahead and put any negative thoughts aside. DTB is an upstanding guy, and he'll do ya right. He seems to have really cheap prices (comparatively), so rest assured if he has it, you won't find it cheaper elsewhere.

Keep up the good work, Collier!!!! 

[SocalWheeler71]

Hi I need a passenger side power mirror for an 87 4Runner. I really only need the outer shell and the cast alloy frame that goes in between the outer shell and power motor, so broken glass, inop motor, cut wires doesn't matter and I don't care if the outer shell is faded or a little scratched as long as it's not cracked and I can still paint it. Tried to PM you, don't know if that went through? Thanks -Eric

[85toyin]

I live in GA and need a good set of rear springs for my 85 project. What are we talking $$ shipped to 30680?
Thank you!

[Nothingface5384]

right now, only thing i rfeally need are the nobbs off of the ac/heater..should be like 4, from a 89-90 pickup

and i'm interested in how much a full 5spd swap and shipping would be to 15211
thanks
Mike

[crazyinsain]

How much for two good tail lights to a 79-83 to 94521?

[DTB]

right now, only thing i rfeally need are the nobbs off of the ac/heater..should be like 4, from a 89-90 pickup

Hey Mike....just give me your address and I will ship you some knobs for free. Thanks, Collier

[SocalWheeler71]

Still waiting for a price on the mirror parts and dash pad

[79coyotefrg]

Collier,  check your email,  one of my Ar-TTORA  guys  needs a set of lockout hubs

[86moneypit]

messaged you back about the power window switch for my 86 runner let me know .

i want to get it from you

maybe the motor to if the switch doesn't work.
thanks martin

[GJToyotabug]

I need a P/S pump for a 91 toy pickup 22re shipped to 81503.
thanks.

[DTB]

Sorry guys! I have been a little slow this week getting back with price quotes.....Too many projects at once....   I should be caught up soon...please be patient!

=-Collier

[Matt60]

have any 04 taco rear ends ? or right halves of one? 

[badzj999]

do you have any 23 spline inputs? im in need of 2 if yes.

[lilstomper]

ok here goes. price 4 timing chain cover and a 22re. if you have the 2 can they picked up? im in northeast oklahoma not more then a saturday drive 4 the wife an i. let me know. thanx much

[snowshoebrue]

how much for a set of chrome headlight trims for an 83 with the turn blinker plastic and possible sunroof glass shipped to 95350

[DTB]

how much for a set of chrome headlight trims for an 83 with the turn blinker plastic and possible sunroof glass shipped to 95350

Do you have Iki or Kioto side markers? Round or square lights?

[DTB]

have any 04 taco rear ends ? or right halves of one? 

?

[DTB]

do you have any 23 spline inputs? im in need of 2 if yes.

input shaft? entire case? help me out here people!

[woodruffrussell]

i was the one asking for the hod and the two door panels, my zip code is 86426, i am located in bullheadcity arizona

[DTB]

do you have any 23 spline inputs? im in need of 2 if yes.

Call Marlin......

[fatkidskickrocks4x4]

Just wondering if you had any throttle position sensors for an '86 4runner. If you do how much to ship to 93611?

[Generz]

I'm looking for these parts:

1) A good electric door window motor (driver's door) for an '88 4Runner

2) 86 4Runner tailgate latch, including the rod that connects it to the cable-pull mechanism (and any plastic rod ends things that might be there...)  like this:

...light blue if you have it, but I don't really care about color...

3) Stuff needed for an auto to manual trans swap.. brake/clutch pedal assembly (everything except the trans/Xfer case... too expensive to ship unless you know a cheap shipper)

4) 1st Gen 4Runner rear window switch from the console

5) a set of 84-88 door hinges (both sides - 4 hinges).. going to make quick change hinges, so worn out ones would be fine.

shipped to zip 78652

Thanks!

[DawnPatrol]

Do you have a 22ret(Turbo) engine and Tranny?

[m44offroad]

how about a gray rear seat back assy. and mounting brackets shipped to 87015

[monyman]

tcase 79-83 or 85-88 EFI for core. shift base would be nice. how much ship to 93703?

[Yota85]

Do you have any 81-83 4x4s. dosent need to have axles tranny engine interior or grill and what not basicaly looking for a solid frame and body to work with. salt kills up here. thanks

[SocalWheeler71]

Hey Collier, what shipper do you use? Let me know when you get the MO. Thanks, Eric

[thetrekkerguy]

Do you have any first gen trucks with the fiberglass back half's (toyota trekkers) also looking for SR5 4runner interior parts would realy like a tip gauge and a good gray dash and pair of buckets thanks

[raptome]

I am interested in original front and rear mudflaps for an 82 4x4, a sliding rear window latch and the mounting hardware for the front fender liners.

[rockyw]

how much for a set of front calipers 4piston of a  solid axle shipped