Locktup's 4th Rebuild

rocktoy83 · April 15, 2007, 08:29:02 PM

It is looking bad

locktup · April 15, 2007, 08:37:55 PM

Quote from: gittinit on April 15, 2007, 08:15:49 PM
I'm loving this thing! How tall is it to the top of the cage?

80" to the top of the exo. When I redo the rear links I am going to drop it 2"-3" inch's

Quote from: KYOTA on April 15, 2007, 08:14:59 PM
tic toc

ps did you get the schematic of the rear lube procedure??

YES. Did you design that procedure

. I'm thinking you may have.

Jason

Shamb · April 15, 2007, 09:45:44 PM

lookin' good bro, I always love to see what your next step is. Those axles are bling'n!

locktup · April 16, 2007, 07:45:14 PM

Thanks
You/I never know whats next?

Jason

Hyena · April 16, 2007, 08:49:11 PM

will it fit out of the garage door?

locktup · April 16, 2007, 08:56:42 PM

3rd gear, 5500 rpm with the tires smokin, it should make it out.

It's only an inch taller than before. If it doesn't then I will run the winch under the axles and up to the rear D-Ring and suck it down.

Jason

RHG · April 16, 2007, 10:01:56 PM

haha that would be awsome to watch. Could air down the tires too. Thats how I get mine into the garage.

Hyena · April 16, 2007, 10:03:29 PM

haha, mine still fits in the garage!

locktup · April 17, 2007, 07:37:08 PM

It fits in the garage and in the trailer $Beer Chug\'n$

locktup · April 30, 2007, 08:51:25 PM

The 4Runner worked great for 30 min. Got half way up Sledge Hammer and blew three seals out of the hydro ram on the first day.

KYOTA · April 30, 2007, 08:56:42 PM

well we hadda have somebodys rig moored at camp to hold up the locktup fan club sign

locktup · April 30, 2007, 09:07:09 PM

Quote from: KYOTA on April 30, 2007, 08:56:42 PM
well we hadda have somebodys rig moored at camp to hold up the locktup fan club sign

No B.S. I really, really hate you guy's.

$Beer Chug\'n$
Jason

KYOTA · April 30, 2007, 09:12:29 PM

snohman calls bull crap!!

Shamb · April 30, 2007, 10:32:21 PM

why you keep blowing seals?

to much presure? what kind of ram/valving did you go with?

locktup · April 30, 2007, 11:20:25 PM

Quote from: Shamb on April 30, 2007, 10:32:21 PM
why you keep blowing seals?

to much presure? what kind of ram/valving did you go with?

I think its just a POS ram. This is the first time Ive used it. It blew in 30 minutes going straight. I bought the ram and orbital from Rock Equipment. I'm going to give them a call some time this week and get a new one. My buddy ran the same setup all week with no problems. I'm dieing to try out all the new junk on my truck.

Jason

gotrocks · May 01, 2007, 08:04:36 PM

Awesome Awesome work. Thanks for the link. I don't know how I missed it.

KYOTA · May 01, 2007, 08:36:37 PM

Quote from: locktup on April 30, 2007, 11:20:25 PM
My buddy ran the same setup all week with no problems.

Jason

there you go thinking you have friends again :bull crap:

locktup · May 01, 2007, 08:39:23 PM

Quote from: KYOTA on May 01, 2007, 08:36:37 PM
there you go thinking you have friends again :bull crap:

I know Ive said this before.

I really hate you guys.

Shamb · May 01, 2007, 10:03:20 PM

i've got a spencer, seems okay... I blow seals alot but its a very slow leak so I dont worry about it to much.

good luck, love seeing the work done on the rig. It's definently one of a kind...

Wermz84 · May 02, 2007, 10:33:15 AM

Damn, sorry to hear that it blew in 30 Minuts. that must have been a bummer after all that work. $I\'m Down$

cant wait to see the new one.

TacoStewie · May 02, 2007, 10:53:53 AM

Quote from: locktup on April 30, 2007, 08:51:25 PM
The 4Runner worked great for 30 min. Got half way up Sledge Hammer and blew three seals out of the hydro ram on the first day.

that is why it was just sitting there, i thought that you did not want to scrach that new axle

b_ripper8 · May 02, 2007, 11:01:28 AM

Love your build-ups

KYOTA · May 02, 2007, 05:53:16 PM

Quote from: TacoStewie on May 02, 2007, 10:53:53 AM
that is why it was just sitting there, i thought that you did not want to scrach that new axle

ohhhhhhh smack-a-roonie!!!

Shoyrtt · May 02, 2007, 05:57:56 PM

Sorry to hear about the Hammers run.

I take it this pic is from the 3rd rebuild?

Any chance you have any pics of the work you did to bob the body behind the seats?

Hyena · May 02, 2007, 06:02:27 PM

that pics was from last years Jambo.

locktup · May 02, 2007, 07:22:47 PM

Quote from: Shamb on May 01, 2007, 10:03:20 PM
i've got a spencer, seems okay... I blow seals alot but its a very slow leak so I dont worry about it to much.

good luck, love seeing the work done on the rig. It's definitely one of a kind...

Its a Rock Equipment ram. I picked up the new one today.

Quote from: TacoStewie on May 02, 2007, 10:53:53 AM
that is why it was just sitting there, i thought that you did not want to scrach that new axle

I know that you don't know me, but I was going to beat the hell out of it like I always do. New paint/axle or what ever I don't care. I'm out for a good time.

Quote from: KYOTA on May 02, 2007, 05:53:16 PM
ohhhhhhh smack-a-roonie!!!

Again I really really hate you/

Quote from: Shoyrtt on May 02, 2007, 05:57:56 PM
Sorry to hear about the Hammers run. I take it this pic is from the 3rd rebuild?

Any chance you have any pics of the work you did to bob the body behind the seats?

Yes it does suck. Unfortunately I don't document the builds very well. I will look around to see if I have any.

locktup · May 02, 2007, 07:25:59 PM

Christopher do any of these help?

locktup · May 02, 2007, 07:27:27 PM

Christopher do any of these help?

locktup · May 02, 2007, 07:28:29 PM

Christopher do any of these help?

speedemon · May 02, 2007, 08:11:39 PM

man i hope my rig is as ugly as yours someday.

great work man.

News:

Locktup's 4th Rebuild