FJ Cruiser SAS?

Started by Destruct O, November 14, 2006, 05:25:12 PM

0 Members and 1 Guest are viewing this topic.

Destruct O

I see that All pro and Petersen's 4 Wheel & Off-Road Magazine teamed up and SAS the FJ Crusier. Did anyone in the real world do it yet?
Destruct O

unclejpl4x4

wow dam  i like 2 see that
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

iNfErNaL

Okay,here ya go.DynaTrac Pro-Rock 60s front and rear,Atlas t-case and 39" BFG Krawlers.
WWW.GLOBALOFFROADSUPPLY.COM

Support Your Local Brawlers
www.RockBrawlers.com 

www.offroadtruckshow.com

gotrocks

I haven't seen one yet do it outside of the one posted above but it wouldn't be that hard.  The frame is similar to the Taco/4Runner if I'm not mistaken and if rumor has it All Pro is going to offer the kit one of these days.

Any info on this infernal

Dooner

Hey I like it! How wide are those 60's
"Project Land Cruzah" In Land Cruiser Section
71 FJ40 327/465/ 4.7 Mini T/c, Trussed, Armored Mini Axles w/ High Cross Over, Aussie Lockers & 30 spline Longs.  p/s 35's, SOA, , .  86 Burb D-60 14 bolt 350/400/205 37's.  02 F350 Tow Barge, Toyo 38's, Banks 5" Wicked wheel turbo, Edge Juice w/ Attitude, Blah Blah Blah

unclejpl4x4

now if i only had the $$ it buy one.     i do have ? tho      are they using  auto trannys or manual   and what are they doing about grearing?
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

Destruct O

YUP! That's the FJ I was talking about! That thing is awesome!
Destruct O

iNfErNaL

Quote from: gotrocks on November 17, 2006, 09:47:52 AM
I haven't seen one yet do it outside of the one posted above but it wouldn't be that hard.  The frame is similar to the Taco/4Runner if I'm not mistaken and if rumor has it All Pro is going to offer the kit one of these days.

Any info on this infernal
Hopefully gonna get started soon.Terry just got all the IFS goodies on his,and Jon's is gonna go under the knife soon.I'll post up when it does.
WWW.GLOBALOFFROADSUPPLY.COM

Support Your Local Brawlers
www.RockBrawlers.com 

www.offroadtruckshow.com

iNfErNaL

Quote from: unclejpl4x4 on November 18, 2006, 06:19:27 AM
now if i only had the $$ it buy one.     i do have ? tho      are they using  auto trannys or manual   and what are they doing about grearing?

The green one has a manual tranny with an Atlas behind it.They're availabe in Auto or 6 speed.We have the only gear sets in the country for them right now,4:56s.
WWW.GLOBALOFFROADSUPPLY.COM

Support Your Local Brawlers
www.RockBrawlers.com 

www.offroadtruckshow.com

gotrocks

the only 4.56?? in the D60 or are you talking about stock drivetrain?

iNfErNaL

Quote from: gotrocks on November 22, 2006, 12:05:08 AM
the only 4.56?? in the D60 or are you talking about stock drivetrain?
oops,No not the D60,for the stock FJs.
WWW.GLOBALOFFROADSUPPLY.COM

Support Your Local Brawlers
www.RockBrawlers.com 

www.offroadtruckshow.com

unclejpl4x4

now  stock  drive line    i know the rear is a E-locker    dose any one know if there gona make a front locker ?

and  gear sets  for the rears/t-cass



but  the real ? is who  wan'ts 2 void there warenty....  i know i would :yupyup:
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

iNfErNaL

Quote from: unclejpl4x4 on November 22, 2006, 12:28:22 PM
now  stock  drive line    i know the rear is a E-locker    dose any one know if there gona make a front locker ?

and  gear sets  for the rears/t-cass



but  the real ? is who  wan'ts 2 void there warenty....  i know i would :yupyup:
As far as I know,they don't plan on offering a front locker as an option.They have a rear E-locker and front traction control.
WWW.GLOBALOFFROADSUPPLY.COM

Support Your Local Brawlers
www.RockBrawlers.com 

www.offroadtruckshow.com