Alwayzbroken's DD project (Low budget just went out the window)

Started by alwayzbroken, October 23, 2006, 11:01:14 AM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages 1 2 3
User actions

alwayzbroken

#60
August 19, 2008, 07:59:38 PM
Had some cage work done and old Fabtech Ivan Bedsides that I had laying around mounted with custom cage work from frontier4x4. He installed an interior cage as well. I am currently swapping in a wide rear end and putting stock rear springs back in for more of a prerunner stance. Sorry for the awful pictures. When it gets back on its wheels I'll have some better ones.
If you still have control you aren't going fast enough

alwayzbroken

#61
August 19, 2008, 08:02:51 PM
Some shots of the interior cage. Up next is swap the crank pulley to finish off the power steering conversion, tune the carb, new front shaft then send the truck off to have the tube and bedsides painted.
If you still have control you aren't going fast enough

crawlerdan

#62
August 19, 2008, 08:19:01 PM
Quote from: alwayzbroken on February 11, 2008, 01:08:53 PM

I also have come into ownership of an antique fire truck siren that must be from the 60s or early 70s.
want some fire truck emergency lights too??

alwayzbroken

#63
August 19, 2008, 08:41:28 PM
Quote from: crawlerdan on August 19, 2008, 08:19:01 PM
want some fire truck emergency lights too??

I think I would end up in jail  :yupyup:
If you still have control you aren't going fast enough

crawlerdan

#64
August 20, 2008, 06:16:36 AM
Quote from: alwayzbroken on August 19, 2008, 08:41:28 PM
I think I would end up in jail  :yupyup:
wheres your sense of adventure?

alwayzbroken

#65
October 12, 2008, 01:42:39 PM
Got some new pictures. Finally on the wheels but still have lots more to do. I made a new front shaft from schedule 40, 2 1/2" tube.
If you still have control you aren't going fast enough

alwayzbroken

#66
October 12, 2008, 01:46:12 PM
As it sits now.
If you still have control you aren't going fast enough

unclejpl4x4

#67
October 12, 2008, 01:46:17 PM
wow thats beefy,  nice
build thread http://board.marlincrawler.com/index.php?topic=39214.0
CB install http://board.marlincrawler.com/index.php?topic=45467.0
roundeyes http://board.marlincrawler.com/index.php?topic=33294.0;highlight=round+eyes
LC exhaust head 2 tip, EB RVstreethead O/S valves,EB  268c/torker cam , .20 over , metal t-chain wear pads
MARLIN clutch 1200, master clutch cly

95SAS

#68
October 12, 2008, 01:51:03 PM
i like it alot!
1986 extracab, SAS 38.5's Locked Duals, truggyfied, beadlocks
1988 2wd bagged and body dropped 3'' with a healthy 22r....

my build
http://board.marlincrawler.com/index.php?topic=35602.0

alwayzbroken

#69
January 11, 2009, 07:37:27 PM
Paint is done.
If you still have control you aren't going fast enough

locktup

#70
January 11, 2009, 07:55:53 PM
Very Nice  :beer:

Jason
Quote from: MUDDONKEY on November 29, 2005, 05:23:59 PM
LOCKTUP SHOULD HAVE HIS OWN DISCOVERY CHANNEL SHOW!!

www.LOCKTUPFABRICATION.com

DTB

#71
January 11, 2009, 08:13:16 PM
I dont really care for the si=pider web but the truck looks nice  :biggthumpup:
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

gmack192

#72
January 12, 2009, 06:41:48 AM
 SHARP TRUCK     how are your tires (10.50 x 34) LTB's holding up?    I plan on running them on my truck, just wondering if they are any good.   

alwayzbroken

#74
January 12, 2009, 04:40:20 PM
Quote from: gmack192 on January 12, 2009, 06:48:26 AM
stock wheels for sale??

I guess so, but shipping from MN would be fairly expensive. I could probably ship them from work truck freight pretty decent if you are actually serious. I think they are just sitting in my friends scrap pile.
If you still have control you aren't going fast enough

alwayzbroken

#75
January 12, 2009, 04:42:36 PM
Quote from: gmack192 on January 12, 2009, 06:41:48 AM
SHARP TRUCK     how are your tires (10.50 x 34) LTB's holding up?    I plan on running them on my truck, just wondering if they are any good.   

I have never driven the truck other than on and off a trailer yet so I can't really say. They work pretty good I know but I've heard the larger sizes have deeper tread and bigger side lugs. I wish I had the 35" version.
If you still have control you aren't going fast enough

alwayzbroken

#76
January 12, 2009, 08:08:27 PM
One more
If you still have control you aren't going fast enough

gmack192

#77
January 13, 2009, 05:55:26 AM
I am trying to keep my truck as low as possible  and don't want a wide tire.   I ran 9.50x34 swampers on my 79 (still have them, worn down)  they did pretty good.
Any idea on how much the shipping would be to 37880??    Ten Mile Tn.  Thanx

NorCalToy

#78
January 15, 2009, 09:25:21 PM
wow...i really like your truck. :drool:
:willynilly: '89 truck SAS sittin on 35's, Tacoma rear axle w/ E-Locker, welded front

kneedownnate - You can go through life being scared of the possible, or you can have a little fun and tease the inevitable

iɹǝʌo ǝɯ ııoɹ sıɥʇ pɐǝɹ uɐɔ noʎ ɟı

:flamer: IFS
Print
Go Up Pages 1 2 3
User actions