Topic: loud clunking

[GoaT]

ok the peice was big. but it is only a small spot that isnt weldes. i think i was just too much weld right there.

questions comments? ideas? what to do?

[GoaT [OP]]

edit

[rebelKrawler83]

thats not looking good id still get a spool instead cuz if you explode the weld its gonna be way worse.

[Cheesemaker]

Just spend the money for a locker and do it right! 

[79coyotefrg]

man look at that boogered up ring gear 

[Cheesemaker]

man look at that boogered up ring gear 

I was looking at that too!

[GoaT [OP]]

its the camra.. there clean and fine.. but

the welds all let go.

 i found alot more peices in the 3rd and the bottom of the axle... so i went ahead and put my old stock 3rd in it till i get the 5.29 fixed right.

im gonna get a spool for it. and will never run a welded 3rd again.

[79coyotefrg]

spool or a aussie

[79coyotefrg]

you know,  for a daily driver  a detroit truetrac would be great,  its not a locker and not a limited slip,  somewhere in between  and very strong

about half the price of a detroit locker 

[DTB]

x2 on the truetrac or aussie

[rebelKrawler83]

spools are cheape though arent they