loud clunking

Started by GoaT, August 20, 2006, 08:50:03 AM

0 Members and 2 Guests are viewing this topic.

Print
Go Down Pages 1 2
User actions

GoaT

#30
August 20, 2006, 12:20:37 PM
ok the peice was big. but it is only a small spot that isnt weldes. i think i was just too much weld right there.

questions comments? ideas? what to do?

rebelKrawler83

#32
August 20, 2006, 12:27:13 PM
thats not looking good id still get a spool instead cuz if you explode the weld its gonna be way worse.
[><]YOTERBOY[><] WHEN IN DOUBT THROTTLE OUT
http://board.marlincrawler.com/index.php?topic=38804.0

Cheesemaker

#33
August 20, 2006, 12:46:16 PM
Just spend the money for a locker and do it right! 
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

79coyotefrg

#34
August 20, 2006, 12:57:47 PM
man look at that boogered up ring gear  :aaa:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

Cheesemaker

#35
August 20, 2006, 01:45:36 PM
Quote from: 79Coyotefrg on August 20, 2006, 12:57:47 PM
man look at that boogered up ring gear  :aaa:
I was looking at that too!
Miss ya Dean (4THEWKN) & Kyle (KYOTA)!!

4THEWKN~9/17/2006  If it wasn't for you, I'd be driving something other than a Toyota!

My build up ~ project Kilchis! http://board.marlincrawler.com/index.php?topic=32961.0
Zak's truck build ~ http://board.marlincrawler.com/index.php?topic=64319.0;topicseen

GoaT

#36
August 20, 2006, 02:09:49 PM
its the camra.. there clean and fine.. but

the welds all let go.

i found alot more peices in the 3rd and the bottom of the axle... so i went ahead and put my old stock 3rd in it till i get the 5.29 fixed right.

im gonna get a spool for it. and will never run a welded 3rd again.

79coyotefrg

#37
August 20, 2006, 02:51:45 PM
spool or a aussie
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

#38
August 20, 2006, 02:55:01 PM
you know,  for a daily driver  a detroit truetrac would be great,  its not a locker and not a limited slip,  somewhere in between  and very strong

about half the price of a detroit locker 
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

DTB

#39
August 20, 2006, 02:56:51 PM
x2 on the truetrac or aussie :yesnod:
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

rebelKrawler83

#40
August 21, 2006, 11:47:23 AM
spools are cheape though arent they
[><]YOTERBOY[><] WHEN IN DOUBT THROTTLE OUT
http://board.marlincrawler.com/index.php?topic=38804.0
Print
Go Up Pages 1 2
User actions