Author Topic: Gettin Out! 85 Runner, Built, Needs nothing (Read 6624 times)

FatAzzRunner · « **on:** Jul 23, 2006, 09:39:21 PM »

Well, it may need a soft top made if you cant handle the weather.

This rig will be ready to be sold on August 13th. I am going to be in CO for a wheelin trip that week and will be finished with the trip on August 13th. If someone in or near CO wants it, it will be there.

-85 Runner
-22re
-Motor runs well
-Tranny Good-5 spd.
-Dual Cases/4.7 case built by Marlin not me/Dual case adapt. is also Marlin (220:1 crawl ratio)/Marlin speedo cable extension.
-Front axle/85 front end/30 spline Longs BRAND NEW(1 trip but didnt get to wheel for more than about 4 hours due to weather)/2" Marlin Spacers/All-Pro Hysteer/ARP hysteer knuckle studs & ARP hub studs/Trail-Gear Front axle truss/All-Pro low profile diff plugs/5.29 Yukons with lifetime warranty/Detroit Locker/8"pipe cap diff. protection/Complete NEW Trail-Gear front knuckle rebuild kit & wheel bearings (not installed yet)
-Rear Axle/85 rear end/Stock inners/Newer wheel bearings and seals/2" Marlin Spacers/8" pipe cap diff. protection/5.29 Yukon gears/Yukon Spool.
-Full Cage front and rear
-Tube Doors
-Sliders
-Brand new Sky T-case skid/Had to cut out a notch to get the front square shaft to clear.
-High Angle rear drive shaft
-New Hi-Lift jack
-Square front drive shaft-extra beefy
-Rear bobbed around 20-21"s
-Front fenders trimmed for clearance
-All-Pro suspension front and rear/works well
-37"MTR's / some rock rash and little cuts, nothing bad or anything to worry about/Spare is like brand new.
-15x8 Black rockcrawler wheels/2.5" backspacing/some rockrash but no bends or breaks/Spare like brand new.
-High Bling Longfield shifter knob on tranny
-Tube front bumper
-Jeep bikini top
-2 sets of doors/one set not bad but not great/one set is pretty damn nice.
-Pioneer CD player/I would be glad to keep it if someone doesnt want it.
-Brand newly installed Hydro Assist steering/works like a freakin charm.
-Ammo Can center console/holds a bunch-o-:pokinit:.
-Outback Air Co2 Tank
-Ammo cans in bed for tools.
-Traction bar/Works but could be reworked for better results.

*** This rig is not a mall cruiser, it does have body damage to it and needs a windshield thrown in it, But you point this rig at something and for the most part, it will go up it.

I also have an ass load of spare parts to go with this rig...........
-Axle shafts front and rear
-Birfields
-Hubs
-Knuckles
-Etc.

I am up for trades. I am lookin to get out of wheelin as all my other wheelin buddies have either moved or sold their

or are talkin about having to sell it soon. Let me know what you got............ boats, hot rods, jet skis, other thoughts, throw em out there, hopefully serious thoughts.

Since I have to list a price..........................$8500.00
Location: Derby, Kansas

__________________

FatAzzRunner · « **Reply #1 on:** Jul 25, 2006, 10:31:07 AM »

Any good trades??

CTENG in KS · « **Reply #2 on:** Jul 26, 2006, 09:08:16 AM »

NOOOO...I'm here I;m here, not sellign shirt, will get truck running...you have to showe me hwere to wheel!! This is BS...

THIS RIG IS NOT REALLY FOR SALE!

THErED1 · « **Reply #3 on:** Sep 25, 2006, 04:12:57 PM »

o my gosh fool ur turck is freakin tight wout u be interestd in a jeep?

cuz im selling it for 15 grand

crawl4life · « **Reply #4 on:** Oct 11, 2006, 07:45:15 PM »

Tight rig, but I know its a wheeler but it looks like it needs some body work!
SICK WHEELER

FatAzzRunner · « **Reply #5 on:** Oct 12, 2006, 01:53:13 AM »

Quote from: THErED1 on Sep 25, 2006, 04:12:57 PM

o my gosh fool ur turck is freakin tight wout u be interestd in a jeep?
cuz im selling it for 15 grand

Haa. Yeah, I would still sell it but I doubt you would be interested now. I had a rough go at Indy trail system in Colorado and the body is thrashed fo sho now. I will post a pic of it in a minute.

Quote from: crawl4life on Oct 11, 2006, 07:45:15 PM

Tight rig, but I know its a wheeler but it looks like it needs some body work!
SICK WHEELER

Yeah, it is definately not a mall cruiser. It is a trail rig and is ugly body wise but it will do anything you want it to.

FatAzzRunner · « **Reply #6 on:** Oct 12, 2006, 01:57:51 AM »

Here are the pics of it now that I am back from CO.

Still wheels great, just did a complete front knuckle/wheel bearing replacement rebuld.

Yeah, the body is screwt.

The 1st pic is what happened when this occured.

FatAzzRunner · « **Reply #7 on:** Nov 08, 2006, 12:30:55 AM »

Top again.

Now, I want to sell this rig with a NICE trailer as well.

I dont have time to sit and update this thread with all the new info.

I added parts to go with this sell from this original ad and also added my trailer to it.

Look at ALLLLL the ad, with ALLLL the spare parts.

I need to get rid of this to kill some debt.

http://forum.ih8mud.com/showthread.php?t=118319

flexin91 · « **Reply #8 on:** Nov 08, 2006, 09:31:47 AM »

I thought we talked about this Aron. Now come to your senses and stop this silly talk of selling.

I just ordered a bunch of parts so won't be alone much longer. Just relax and take deep breaths

Call me.

motorider228 · « **Reply #9 on:** Nov 08, 2006, 02:06:19 PM »

Sucks your sellin this. I always hate to see it when guys on here sell their rigs they built up. For anyone interested, I just saw this rig in Crawl magazine so if anyone buys it they will own a vehicle that was featured in a mag. Bump for you FatAzz

nor-cal zukini · « **Reply #10 on:** Nov 13, 2006, 09:27:30 PM »

Ya, great shots in Crawl Mag. Very capable!

kneedownnate · « **Reply #11 on:** Nov 13, 2006, 10:10:00 PM »

Quote from: FatAzzRunner on Oct 12, 2006, 01:57:51 AM

The 1st pic is what happened when this occured.

Is that trail fenced off?? That's pretty crazy... sorry to get off topic

FatAzzRunner · « **Reply #12 on:** Nov 14, 2006, 08:00:25 AM »

Mainly its fenced off at the entrance and exit cause rigs that were not NEARLY capable enough to even be in there that were in there taking ways around the rocks that were NOT trails. The club that maintains it does an EXCELLENT job and they put the fence up in specific areas.

ticketguy · « **Reply #13 on:** Dec 06, 2006, 11:32:28 AM »

i was wondering if you were interested in selling the dual cases and the hydro assist? if you are give me a call at 479-409-7059 i am in fayetteville ar. thanks
did you crawl that line at disney next to the waterfall?

eazy · « **Reply #14 on:** Dec 07, 2006, 10:53:00 AM »

how bout terbo muffler barrings and hydolic blinker flued

oz31p · « **Reply #15 on:** Dec 14, 2006, 07:27:26 AM »

i would wheel the mall in this runner......over the cars in the parking lot around the emo kids and up the waterfall.

Broke_Okie_Ty · « **Reply #16 on:** Dec 14, 2006, 09:57:49 PM »

Quote from: oz31p on Dec 14, 2006, 07:27:26 AM

i would wheel the mall in this runner......over the cars in the parking lot around the emo kids and up the waterfall.

the plan for days you can't quit make it to the trails.

FatAzzRunner · « **Reply #17 on:** Dec 17, 2006, 02:00:34 AM »

Quote from: ticketguy on Dec 06, 2006, 11:32:28 AM

i was wondering if you were interested in selling the dual cases and the hydro assist? if you are give me a call at 479-409-7059 i am in fayetteville ar. thanks
did you crawl that line at disney next to the waterfall?

Sorry man, I wont seperate anything on this rig. Just wanna sell it all or keep it all. Thanks though.

Yeah, I have made that right side waterfall line several times and have failed it several times. Just gotta be RIGHT on the line when you try it in a littler rig like mine.

FatAzzRunner · « **Reply #18 on:** Dec 17, 2006, 02:01:40 AM »

Quote from: oz31p on Dec 14, 2006, 07:27:26 AM

i would wheel the mall in this runner......over the cars in the parking lot around the emo kids and up the waterfall.

Sounds like fun. I know of a few EMO kids that I wouldnt mind givin a scare.

toytank · « **Reply #19 on:** Jan 17, 2007, 05:10:33 PM »

$Beer Chug\'n$ i down woth the emo kid scare.was that trail billings outside grand jct co

toytank · « **Reply #20 on:** Jan 17, 2007, 05:13:34 PM »

ive got a drag car needs work a 99 yz 250 and a yzf r1 that has been laid over but runs real good let me know if your interested in some horse tradin

FatAzzRunner [OP]

FatAzzRunner [OP]

FatAzzRunner [OP]

FatAzzRunner [OP]

FatAzzRunner [OP]

FatAzzRunner [OP]

FatAzzRunner [OP]

Related Topics