Author Topic: NOOB again (Read 5063 times)

KYOTA · « **on:** Jan 02, 2004, 05:26:12 PM »

Checkin in, I'm building an 83 Yoty with Chevy's and 44044's, recently bought an MC08, ultimate 4.7, 23 spline upgrade, HDL52 trans, and super hd clutch kit from Marlin. Longs and All-Pro chromo inners, Budbilt xmember, and Schaffer's shock hoops. Tried to order gears and lockers from Marlin today but no-one there, must be out wheelin!

Anyway, howdy $Beer Chug\'n$

84runner · « **Reply #1 on:** Jan 05, 2004, 10:43:45 AM »

Well damn if you can't do it right the first time don't do it at all

KYOTA · « **Reply #2 on:** Jan 06, 2004, 05:49:57 PM »

Yep, I figure since its torn apart I might as well just do it all. Still need gears and lockers, wheels and tires, shocks and a little more fabbin.

KYOTA · « **Reply #3 on:** Jan 09, 2004, 07:01:39 PM »

Update! just got off the phone with Dave at Marlin, ordered my gears and lockers, front FJ80 4.88 w/Detroit, rear V6 4.88 and spool :grinhat:

WHITE_TRASH · « **Reply #4 on:** Jan 09, 2004, 07:14:04 PM »

Now I hope that you realize that you really SUCK!!
Sound sike that will be a real machine when its done

KYOTA · « **Reply #5 on:** Feb 02, 2004, 06:36:30 PM »

Put my high pinion in, Martacked my axles, put my new trans in and got started rebuilding knuckles this weekend. Should be finished with front axle by tomorrow night

Red_Runner · « **Reply #6 on:** Feb 02, 2004, 07:52:22 PM »

sounds like your moving fast.Lets see some pics!

KYOTA · « **Reply #7 on:** Feb 06, 2004, 10:30:49 AM »

How I got the truck

KYOTA · « **Reply #8 on:** Feb 06, 2004, 10:33:14 AM »

After taking the canopy, running boards and Dukes of Hazard brush guard off

KYOTA · « **Reply #9 on:** Feb 06, 2004, 10:42:16 AM »

This is after installing Chevy springs and rotating axle. Havent welded spring perches yet, waiting till cases are in for alignment. No new pictures but have front hanger and 44044's in and currently rebuilding the axle. I'll get the digi out this weekend!

84runner · « **Reply #10 on:** Feb 06, 2004, 10:48:14 AM »

So what kind of meats you gonna run under that sweetie? Do you plan on a bobb job too?

KYOTA · « **Reply #11 on:** Feb 06, 2004, 10:54:06 AM »

I'm running whats on it :laugh:I think I'm gonna go with 36" sx's and hell ya I'm cuttin' er down, as much as I can but not going to cut the end of the frame off in case I dont like the double shackles so I can still move rear shackle back

84runner · « **Reply #12 on:** Feb 06, 2004, 10:55:56 AM »

Right on. I'm running 36X12.5 TSL's and I like them alot.

KYOTA · « **Reply #13 on:** Feb 06, 2004, 10:57:40 AM »

You have any problems loosing a bead since they're narrower?

84runner · « **Reply #14 on:** Feb 06, 2004, 11:00:42 AM »

I usually run them at about 10 psi on a 84 Runner and I did the con about 7 times last year and no problems. There on a 15 inch rim 10 inches wide. I wish I would have went 8 inches wide

KYOTA · « **Reply #15 on:** Feb 06, 2004, 11:04:05 AM »

Definately 8's, I'm considering beadlocks too (Allied or Longs weld on rings)

84runner · « **Reply #16 on:** Feb 06, 2004, 11:08:53 AM »

Rocktomper.com has some pretty tuff looking bead lockes. I am thinking about making my own.

KYOTA · « **Reply #17 on:** Feb 15, 2004, 06:00:56 PM »

I have moved this over to the builup section. You go now! 8)

KYOTA · « **Reply #18 on:** May 28, 2009, 05:45:20 PM »

bump

Wermz84 · « **Reply #19 on:** May 28, 2009, 06:52:58 PM »

WTF.

Rocksurfer · « **Reply #20 on:** May 28, 2009, 07:44:53 PM »

Noobs!!!

brainlessfool · « **Reply #21 on:** Jun 02, 2009, 07:45:19 PM »

Quote from: Rocksurfer on May 28, 2009, 07:44:53 PM

Noobs!!!

X2 you need to read the rules

or you mite get

and then

*** YELLER *** · « **Reply #22 on:** Jun 05, 2009, 05:24:11 PM »

2

:moron:

KYOTA [OP]

KYOTA [OP]

KYOTA [OP]

KYOTA [OP]

KYOTA [OP]

KYOTA [OP]

KYOTA [OP]

KYOTA [OP]

KYOTA [OP]

KYOTA [OP]

KYOTA [OP]

Related Topics