Built front axle

Started by ksmith, May 07, 2006, 03:53:50 PM

0 Members and 1 Guest are viewing this topic.

ksmith

I have a built solid axle with 30-spline longs, flanges, highsteer set up for hydro-assist, and custom diff guard. It had 4.88's with a lockright but I think I blew up the locker this weekend and last trip I blew up the rear and relplaced it with a complete 3rd from Randy's with a spool. I'm going to sell the axles and replace them with 60's and was wondering what they would be worth and if you thought I could get any more for the front if it was complete by putting the rear spool into the front? So what do ya'll think they're worth?
Kane Smith
[email protected]
Make it or break it! (I usually break it)

79coyotefrg

:smack:  what are we gonna do with you man :down:



:tantrum:  and didnt EVEN  stop  by so i could see the carnage :slap:

next  time you better stop off I-30 exit 73  :bat:
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

gotrocks

did you check the front yet or are you just guessing it was the locker because I broke my r/p one I put my 30 splines in.  I thought it was my locker as well but it ended up being a r/p

ksmith

I haven't pulled it yet but I think it's my locker because it'll still pull but makes a really bad noise when it's in 4WD. It could be the r/p but reagardless, last time I broke the locker it messed up the r/p also. So what does everyone think it's worth.
Kane Smith
[email protected]
Make it or break it! (I usually break it)

79coyotefrg

91superyota  was wanting to do a sas,  hes there in nacodoch, oh crap :smack:  your town,  Randy Hinckle [email protected]  is his email  if you talk to him let me know  cause he wanted the idler arm for his ifs,  i havent had the money to send it to him
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

ksmith

Yeah, he's one of my buddies, I gave him a call last night and talked to him about it.
Make it or break it! (I usually break it)

79coyotefrg

well let me know if Randy wants this idler arm
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

ksmith

Ok, I'll ask him but I don't know if he has the money or not, he just moved into a new house, you know how that goes. What do you think I should start asking for my axle? Thanks,
Kane Smith
[email protected]
Make it or break it! (I usually break it)

79coyotefrg

if i had money  i'd offer you $75  for the empty housing
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

yotaboy79

i may be interested in just the 30 splines if you deside to separate if you do pm me

Shamb

probably start at $600 ish range.. that's complete. I believe thats what I got for mine but I gave the guy a smoking deal.

R.I.P to my Papa, I miss you pops......

Knowledge is power  www.pirate4x4.com/forum

New Buildup in process 85' 4runner "Bad Decisions"
http://board.marlincrawler.com/index.php?topic=52566.0

Check out my 1-ton build up thread
http://board.marlincrawler.com/index.php?topic=22600.0

kneedownnate

Quote from: Shamb on May 08, 2006, 07:12:06 PM
probably start at $600 ish range.. that's complete. I believe thats what I got for mine but I gave the guy a smoking deal.

:shhh: , it's only worth $29.99 man, just lemme know where to send the payment :thumbs:
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

79coyotefrg

Quote from: kneedownnate on May 08, 2006, 10:54:51 PM
:shhh: , it's only worth $29.99 man, just lemme know where to send the payment :thumbs:
:rofl: 
i wouldnt take anything less than what the longs cost new
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

79coyotefrg

well assuming its just the locker thats broke, i need the R&P
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way