Topic: wtf please help my truck sags horribly to the drivers side

[Rocksurfer]

the hell are you talking about? the shock in place of the torque rod allows for more droop if thats what your referring to. im confused from your rambling dry jokes.

I'm with you on this, I did the shock/steering stablizer torque rod setup and it does work.

[84_yota_4wd [OP]]

no those were new springs. what a cut valve no!!!!!!!!!!!!!!!!!!!!!!!! f@ck i cant afcford that i sure as hell hope thats not it. r u sure um it only does it now if i floor it in first gear past 4000 rpm

[79coyotefrg]

the hell are you talking about? the shock in place of the torque rod allows for more droop if thats what your referring to. im confused from your rambling dry jokes.

i was referring to you putting the sway bar back on to fix your sagging springs 


i too have a shock  but its a long one and the mount is under the radiator now

[eightyfive]

i was referring to you putting the sway bar back on to fix your sagging springs 


i too have a shock  but its a long one and the mount is under the radiator now

i put the sway bar on to fix body roll? it just so happened to fix the lean. stoked about that.

oh, and my springs aren't sagging, i said i just lifted my truck...

[Rocksurfer]

The problem I see with that cure would be that the swaybar mount would not be strong enough to hold the load that is being applied to it if it is pulling and or pushing the supension to level it out. Just like a shock tower is not a bumpstop and will rip off the truck if used as one.

[eightyfive]

totally understand. it's just when i put my sway bar back on, it leveled out the truck, WEIRD. hey, since it worked for me, i say give it a try. (its not going to cost you anything)

[84_yota_4wd [OP]]

yea true i had it on for awile back when i only had 4" of lift and i sat uneven then too thanks though