38s?

[dentedfender]

i just got a set of super swampers ssr 38x15.50x17 and was wondering if anyone has ran these tires on there yota, and what they had to do to get them to fit?  I have f-150 rear springs with a 2inch aal and 85 rears up front with a 2inch aal.  I already cut off the body line fold thing up front and hammered it back so it is nice and smooth.  Is this going to be enough? are am i going to have to tub the fire wall?  thanks for your help.

[MiniSimp]

Move your axle forward another inch, tub the firewall, cut the fenders.

It's sawzall time!

[Hyena]

You will need to tub the firewall for sure unless you move your axle forward another 3-4 inches.

[KYOTA]

here, at the bottom of the page and page 9
http://board.marlincrawler.com/index.php?topic=2993.280

and here w/ 38's
http://board.marlincrawler.com/index.php?topic=12507.0

[Hyena]

And here is my fender tubbing i did on my truck.  I read over KYOTA's thread before i did mine.


hhm, wonder where it went.

Edit:  here it is  http://board.marlincrawler.com/index.php?topic=12469.0

[KYOTA]

And here is my fender tubbing i did on my truck.  I read over KYOTA's thread before i did mine.

forget something Brad? 

[BUBBA]

I run 38's on my runner.It's ghetto fabbed but I run a 3"b/l,3"blocks in the rear with stock springs (soon to be ditched) and stock springs in front with a 2"dropped hanger and axle moved forward 1".they only rub the steering box.

[dentedfender]

Thanks for the help ill probally do it as soon as i get my hysteer, also im going to be running esclade wheels with 5.5 inches of back spacing, will the 1.5 spacers and wider rear axle be enough to to fit the tires with that much back spacing?