mitchells very slow build up thread

Started by mitchell, January 14, 2006, 03:23:39 PM

0 Members and 1 Guest are viewing this topic.

Print
Go Down Pages1 2
User actions

mitchell

January 14, 2006, 03:23:39 PM Last Edit: January 21, 2006, 04:24:39 PM by mitchell
i made these out of some 2" X 2" square tubing i picked up off of the job site
what do yall think
"A smile on the lips and a hole in the head"

DTB

#1
January 14, 2006, 03:26:22 PM
IMO, anything that is free is good... but that's cuz i'm broker than a project window. :qtip:
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

mitchell

#2
January 14, 2006, 03:36:58 PM Last Edit: January 14, 2006, 04:37:19 PM by mitchell
you cant beat that free stuff
:biggthumpup:
"A smile on the lips and a hole in the head"

BLACKDOG

#3
January 14, 2006, 06:47:41 PM
Nice :thumbs: looks kinda like mine, but I did mine outta water pipe (free :yupyup: ) Free is always good
:usa: Its better to die on your feet than live on your knees :usa:

"Freedom is never more than one generation away from extinction. We didn't pass it to our children in the bloodstream. It must be fought for, protected, and handed on for them to do the same, or one day we will spend our sunset years telling our children and our children's children what it was once like in the United States where men were free. "

"I don't believe in a government that protects us from ourselves."
              -Ronald Reagan

Don't take life too seriously, it isn't permanent

S-10 Stewy

#4
January 15, 2006, 09:45:22 PM
I have never believed that spending a lot of money got you the "very best"

Those will work awesome when you rest your rig on a rock and yep ... free is not bad at all!!!!
It's built Chevy tough with Toyota stuff!

kneedownnate

#5
January 15, 2006, 09:54:51 PM
Where do you work anyway?  I could use some steel for sliders too...
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

jimbo74

#6
January 15, 2006, 10:02:30 PM
they need some paint to prevent further rust
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

kneedownnate

#7
January 15, 2006, 10:10:41 PM
Naa, paint just gets rubbed off on the rocks!
RIP KYOTA

You can go through life being scared of the possible, or you can have a little fun and tease the inevitable.

Give a man venison, he'll eat for a day. Teach a man to hunt Blacktail, he'll be frustrated for life!

mitchell

#8
January 16, 2006, 04:18:25 PM
well i got them welded to the frame and shot some paint on them
"A smile on the lips and a hole in the head"

mitchell

#9
January 16, 2006, 04:23:30 PM
Quote from: kneedownnate on January 15, 2006, 09:54:51 PM
Where do you work anyway?  I could use some steel for sliders too...

i hang grid ceilings for a living
i got about 10 sticks that where 8' long from the iron workers
"A smile on the lips and a hole in the head"

crwlntoy

#10
January 16, 2006, 05:42:27 PM
you gotta love working construction. I use sprinkler pipe for my sliders, of course its always free from the sprinkler fitters.
If God didnt want me to eat animals,then why are they made out of meat?Wackum & stackum

mitchell

#11
January 16, 2006, 06:13:48 PM
here is my sprinkler pipe rear bumper
i am going to make a new square tube bumper for the rear to match my sliders
its been on there for about a year or so
"A smile on the lips and a hole in the head"

mitchell

#12
January 21, 2006, 03:03:19 PM
they work
"A smile on the lips and a hole in the head"

DTB

#13
January 21, 2006, 03:10:01 PM
What's that orange thing hanging under your truck?
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

jimbo74

#14
January 21, 2006, 03:37:59 PM
Quote from: DirToyBoy on January 21, 2006, 03:10:01 PM
What's that orange thing hanging under your truck?


those are truck nutz silly :slap:

www.trucknutz.com
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

mitchell

#15
January 21, 2006, 04:36:23 PM
finally finished my wheels today
these are 8 bolt hummer rims with pressed plates
first i cut the old centers out and i welded the plates in the wheels
it gave me a 3 1/2" back spaceing
i have the mag runflats in the tires with some used 37-12.5-16.5 military tires

"A smile on the lips and a hole in the head"

mitchell

#16
January 21, 2006, 04:46:58 PM
these are the finished wheels and tires
"A smile on the lips and a hole in the head"

mitchell

#17
January 21, 2006, 04:57:51 PM
these are the finished wheels and tires
"A smile on the lips and a hole in the head"

dov'd85

#18
January 21, 2006, 05:12:09 PM
looks good, :clap2:  lose those damnnn truck nuts... :smack:
85 long bed: 30 spline long, hydro assist, hysteer, 223.1 twin sticks, 39.5 iroks, rear disk,
http://board.marlincrawler.com/index.php?topic=28696.msg344178#msg344178

mitchell

#19
January 21, 2006, 05:33:22 PM
you dont like my balls  :eyebrow: 
or are they to rude
i thought it would be funny  :yesnod:
"A smile on the lips and a hole in the head"

jimbo74

#20
January 21, 2006, 05:36:34 PM
Quote from: mitchell on January 21, 2006, 05:33:22 PM
you dont like my balls :eyebrow:
or are they to rude
i thought it would be funny :yesnod:

funny like :bling: :gay: and new sliders with rock rash
:usa:

The cost of freedom is always high, but Americans have always paid it. And one path we shall never choose, and that is the path of surrender, or submission.

~ John F. Kennedy ~

mitchell

#21
January 21, 2006, 05:41:05 PM
i am thinking about doing chevy springs in the rear and rears up front
i only want to lift it about three more inches i have four inches now with stock springs 2" shackles and 2" body lift that was on it whin i bought it
i will be triming the finders soon
and i am looking for ideas on a square tube front bumper
"A smile on the lips and a hole in the head"

DTB

#22
January 21, 2006, 05:45:10 PM
Quote from: mitchell on January 21, 2006, 05:41:05 PM
i am thinking about doing chevy springs in the rear and rears up front
i only want to lift it about three more inches i have four inches now with stock springs 2" shackles and 2" body lift that was on it whin i bought it
i will be triming the finders soon
and i am looking for ideas on a square tube front bumper

What size tires are you going to run? Seven inches of lift seems excessive. ;)
RIP KYOTA
Quotetoyminator2000 – There has to be dumb people in order for there to be smart people
Low down & durrrrrrty Rock Stacking Web Wheeler :driving: Too many Yuppies..:shake:...Not enough Hippies :flamer:  Hobbies: stealing cookies, slangin' tacos, owning tequila bars, wheeling with paco

mitchell

#23
January 21, 2006, 05:48:03 PM Last Edit: January 21, 2006, 07:04:24 PM by mitchell
Quote from: jimbo74 on January 21, 2006, 05:36:34 PM
funny like :bling: :gay: and new sliders with rock rash

i think i will leave the balls swinging just for you
you still hung up on the new sliders :shake:

talk about  :bling: :gay:
"A smile on the lips and a hole in the head"

mitchell

#24
January 21, 2006, 05:52:18 PM
Quote from: DirToyBoy on January 21, 2006, 05:45:10 PM
  What size tires are you going to run? Seven inches of lift seems excessive. ;)

well i have 4" of lift now with 37s
when i buy new tires i am thinking of getting 38s
i was thinking that 7" wasnt that bad
"A smile on the lips and a hole in the head"

IronClad

#25
January 21, 2006, 06:15:47 PM
i bet if i stuck a set of trucknutz on my rig you guys wouldnt talk :pokinit:  :shake:  you 2 are  tools.
Annihilation  Fabrication
Do you need a Hammer?
My build thingy... http://board.marlincrawler.com/index.php?topic=39885.0
（╯°□°）╯︵ ┻━┻
Word hard, Keep your head in the game and if anyone gets in your way tell them you don't give a damn !

79coyotefrg

#26
January 23, 2006, 06:10:15 PM
a bit rude if you ask me  :eek:  hey  them be Texas tags  :eyecrazy:  where are you located
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

mitchell

#27
January 23, 2006, 06:21:50 PM
hico texas
"A smile on the lips and a hole in the head"

79coyotefrg

#28
January 23, 2006, 06:24:01 PM
:dunno:  im guessing thats somewhere west of Texarkana
AR-TTORA founder 22R bored.060,LCE stage II race cam http://pure-gas.org/    32/36weber, :driving: Marlin 1200 NON ceramic clutch, L52SHD+dualcase #2919, cable-locker, Yukon 5.29 gears, 35's, Allpro ebrake, front springs, and high steer, F150rears    RIP Nitro 9-29-07 :(  I sure miss him :down: MarlinCrawlerInc IS NOT affiliated with TrailGear in any way

mitchell

#29
January 23, 2006, 08:52:36 PM
it is about 90 mls southwest of dallas fort worth and about 80mls west of waco
witch puts in about the center of texas
"A smile on the lips and a hole in the head"
Print
Go Up Pages1 2
User actions