Topic: 3.4 swap on 92 3.0 4runner

[Thumper]

ok guys ive finally decided too 3.4 swap my 92 runner. so far ive got the motor, wireing harness, intake computer and just found the mass air flow sensor and cover the fan bolts too.
What all is involved in swapping in this motor, i know my tranny will work but can i use my flywheel on the 3.4 engine sence its the same engine family? also how hard was it too wire everything up and get it too run good with the 3.0 wireing harness wired in with the 3.4?
any info/ pics would be good.
thanks
adam

[79coyotefrg]

i would think it would be  a almost bolt in deal, but not sure as ive never done it

[Thumper [OP]]

Come on people last time i was looking for mods for a 3.0 everybody was giveing me hell about it and said put in a 3.4 and now there aint anybody saying anything what the crap can we just give greif on here and not advice i know there has too be somebody on here that has done this before.
adam

[mudaddict]

ok im doing the same thing but im doing motor and tranny together check out the site offroadsolutions i beleive it is and they ahve a kit to do the swap i havent been on the site latley so im not sure if they have instructions or anyhitng like that.from what i have heard from a buddy who did it is that they had to make a new cross member for the engine to sit on. not positive on everythign tho but check out off road soultions  for some info on that.

[79coyotefrg]

almost everybody is at the rubicon this weekend for MCR4 

[914Runner]

go to www.yotatech.com and www.4x4wire.com and search my user name. You will find my posts on my 3.4L swap.